journal article·2016-01

Microstructure characterization of nanocrystalline (Ti0.9W0.1) C prepared by mechanical alloying

Chiheb Slama, Mohieddine Abdellaoui, Mouhamed Dhafer Boulaares

Publisher page

Abstract

Abstract The microstructural characteristics of nanocrystalline (Ti 0.9 W 0.1 )C during mechanical alloying were investigated by using X-ray diffraction. The diffraction crystallite size (DCS) and the microstrain of (Ti 0.9 W 0.1 ) C ball milled powders have been determined according to various models. The Scherrer and the Stokes–Wilson relations, the Williamson–Hall plot and the Rietveld refinement methods have been employed. The Rietveld method seems to be the best since it gives homogeneous results. The results obtained showed that the (Ti 0.9 W 0.1 )C diffraction crystallite size decreases tremendously and its microstrain increases as the milling duration increases. With the further milling of the nanocrystalline (Ti 0.9 W 0.1 )C within the stage of the steady-state diffraction crystallite size (8–6 nm), we observed a grain boundary relaxation process that was manifested by evident decreases in the root-mean-square strain, as well as important increases in the dislocation density and the volume fraction. Thus, when the (DCS) is higher than the critical value (8 nm), the plastic deformation is governed by the dislocation sliding mechanism. In the contrary, when the (DCS) is lesser than 8 nm, the plastic deformation is governed by the grain-boundary sliding mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Ellis · 1990 · 978
2. Sintering properties of submicron TiC powders from carbon coated titania precursor10.1023/A:1004876121000 ↗
3. Structure and properties of nanocrystalline TiC full-density bulk alloy consolidated from mechanical reacted powders10.1016/S0925-8388(00)00692-7 ↗
4. Effect of SPS process sintering on the microstructure and mechanical properties of nanocrystalline TiC for tools application10.1016/j.ijrmhm.2011.06.013 ↗
5. Gleiter · Z. Met. · 1984 · 75 · 263
6. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
7. Manocrystalline materials and coatings10.1016/j.mser.2004.07.001 ↗
8. Bestimmung der Grösse und der inneren structure von kollooidteilchen mittels Röntgenstrahlung
9. Wilson · 1963 · 21
10. The diffraction of X-rays by distorted crystal aggregates10.1088/0959-5309/56/3/303 ↗
11. X-ray line broadening from field aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
12. The “state of the art” of the diffraction analysis of crystallite size and lattice strain10.1524/zkri.2008.1213 ↗
13. Determination of crystallite size and lattice distortions through X-ray diffraction line profile analysis10.1007/BF00482725 ↗
14. Profile analysis for microcrystalline properties by the Fourier and other methods10.1071/PH880173 ↗
15. Use of the Voigt function in a single-line method for the analysis X-ray diffraction line broadening10.1107/S0021889882012035 ↗
16. Caglioti · Nucl. Inst. Methods · 1958 · 3 · 22310.1016/0369-643X(58)90029-X ↗
17. Wertheim · Rev. Sci. Instrum. · 1974 · 11 · 136910.1063/1.1686503 ↗
18. Gravereau · 2012 · 190
19. A mathematical and experimental dynamical phase diagram for ball-milled Ni10Zr710.1016/0925-8388(94)91124-X ↗
20. The physics of mechanical alloying in a planetary ball mill: mathematical treatment10.1016/0956-7151(95)92625-7 ↗
21. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
22. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
23. Spark plasma sintering of (Ti0.9W0.1) C powders prepared by mechanical alloying10.1016/j.ijrmhm.2013.12.009 ↗
24. An experimental investigation of extrapolation methods in the dimensions of crystal10.1088/0959-5309/57/3/302 ↗
25. Microstructure characterization of nanocrystalline TiC synthesized by mechanical alloying10.1016/j.matchemphys.2009.11.048 ↗
26. The carbon nonstoichiometry and the lattice parameter of (Ti1−xWx)C1−y10.1016/j.jeurceramsoc.2009.10.022 ↗
27. Montes de oca · 2002
28. Powder diffraction file · 1974
29. Effect of iron on mechanical activation and structural evolution of hematite–graphite mixture10.1016/j.jallcom.2008.04.061 ↗
30. Microstructure evolution and thermal properties in nanocrystalline Fe during mechanical attrition10.1016/S1359-6454(00)00310-4 ↗
31. Nanocrystalline metals prepared by high-energy ball milling10.1007/BF02646980 ↗
32. Grain growth in nanocrystalline iron prepared by mechanical attrition10.1016/S1359-6454(96)00300-X ↗
33. Dislocations and grain size in ball-milled iron powder10.1016/S0965-9773(96)00048-7 ↗
34. Nanostructured formation by mechanical attrition10.1016/0965-9773(95)00027-5 ↗
35. Nanocrystalline materials — current research and future directions10.1023/A:1011026900989 ↗
36. Siegel · Mater. Sci. Forum · 1997 · 651 · 235
37. Hydrogen as a probe for the average thickness of grain boundary10.1016/0036-9748(87)90258-4 ↗
38. Cluster assembled nanophase materials10.1146/annurev.ms.21.080191.003015 ↗
39. Nanocrystalline materials10.1016/0079-6425(89)90001-7 ↗
40. Grafout · 2004
41. Nanocrystalline state and solide state amorphization10.1016/0921-5107(95)80028-X ↗
42. Deformation of electrodeposited nanocrystalline nickel10.1016/S1359-6454(02)00421-4 ↗
43. Siegel · 1992 · 431