Fabrication of homogeneous tungsten porous matrix using spherical tungsten powders prepared by thermal plasma spheroidization process
Source abstract
Abstract
Abstract In this work, spherical and dense tungsten particles with average size of 13 μm were synthesized by thermal plasma spheroidization process, and were further used to fabricate porous tungsten matrix with homogeneous pore distribution and open pore channel. The influences of sintering temperatures, dwelling time and additive on the microstructure and microhardness evolution of porous products were investigated, and the experimental results show that spherical and dense particles could keep their initial shape and favor the reservation of packed pores with narrow pore size distribution, which exhibits superiority in fabrication of tungsten matrix with uniform pore distribution compared with irregular tungsten powders. Specially, the porosity of porous tungsten matrix could be finely tuned from 25% to 30%, which has obvious effect on microhardness of obtained porous skeleton. The sintering kinetic analysis indicates that grain boundary diffusion is the primary mass transport mechanism during the fabricating porous tungsten matrix process. Furthermore, W Cu composites fabricated by spherical powders exhibit higher thermal conductivity than that of irregular powders, which reveals the superiority of spherical tungsten powder.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Lassner · 1999
2. Reactive sintering of porous tungsten: a cost effective sustainable technique for the manufacturing of high current density cathodes to be used in flashlamps10.1016/j.jmatprotec.2005.05.037 ↗
3. The tungsten powder study of the dispenser cathode10.1016/j.apsusc.2005.08.012 ↗
4. Brazing porous tungsten and molybdenum using palladium and titanium foils10.1016/j.ijrmhm.2011.10.007 ↗
5. Thermal and electrical properties of WCu composite produced by activated sintering10.1016/j.matdes.2012.09.034 ↗
6. The effect of tungsten particle size on the processing and properties of infiltrated WCu compacts10.1007/s11661-998-0366-9 ↗
7. Evaluation of WCu metal matrix composites produced by powder injection molding and liquid infiltration10.1016/j.msea.2007.10.048 ↗
8. Sintering behavior of W-30Cu composite powder prepared by electroless plating10.1016/j.ijrmhm.2013.10.012 ↗
9. Novel MMC microstructures prepared by melt infiltration of reticulated ceramic preforms10.1179/026708300101508667 ↗
10. Enhanced liquid-phase sintering of WCu composites by liquid infiltration10.1016/j.ijrmhm.2013.12.004 ↗
11. Correlation of emission capability and longevity of dispenser cathodes with characteristics of tungsten powders10.1016/S0169-4332(03)00289-7 ↗
12. The activated sintering of tungsten with Group-VIII elements10.1149/1.2425876 ↗
13. The properties of tungsten processed by chemical activated sintering10.1007/BF02662370 ↗
14. Tungsten-copper composite production by activated sintering and infiltration10.1016/j.ijrmhm.2011.03.009 ↗
15. Effect of agglomeration on mechanical properties of porous zirconia fabricated by partial sintering10.1111/j.1151-2916.2002.tb00388.x ↗
16. Microhardness as a measure of homogeneity of porous tungsten10.1016/j.matlet.2003.11.031 ↗
17. Three-dimensional porous silica ceramics with tailored uniform pores: prepared by inactive spheres10.1016/j.jeurceramsoc.2015.06.020 ↗
18. Electron-optical investigation of the sintering kinetics of tungsten powders of spherical-particle shape. I. Experimental investigations of the sintering of tungsten powders10.1007/BF00797057 ↗
19. Effect of plasma spheroidization process on the microstructure and crystallographic phases of silica, alumina and nickel particles10.1088/1009-0630/9/5/20 ↗
20. The effect of trace nickel additive and ball milling treatment on the near-full densification behavior of ultrafine tungsten powder10.1016/j.ijrmhm.2012.02.014 ↗
21. Phase-equilibria effects on the enhanced liquid-phase sintering of tungsten-copper10.1007/BF02646516 ↗
22. High-field microscopy of nickel on tungsten10.1016/0039-6028(74)90071-5 ↗
23. Enhanced low-temperature sintering of tungsten10.1007/BF02659818 ↗
24. Kang · 2005
25. Effects of low-content activators on low-temperature sintering of tungsten10.1016/j.jmatprotec.2008.09.026 ↗
26. Fabrication and sintering characteristics of doctor blade YBCO-Ag tapes10.1016/S0272-8842(03)00126-3 ↗
27. Porosity-dependence of elastic moduli and hardness of 3Y-TZP ceramics10.1016/S0272-8842(98)00037-6 ↗
28. Comment on “Mechanical properties in the initial stage of sintering”10.1023/A:1006777123094 ↗
29. Evaluation of conductivity in W-Cu composites through the estimation of topological microstructures10.1016/j.matlet.2005.12.113 ↗