Next-generation tungsten carbide cutting bits through cryogenic treatment technique for superior rock cutting performance for mining applications: An experimental study
Source abstract
Abstract
The mining sector seeks innovation to enhance operational efficiency and prolong cutting tool life. This research investigates the impact of cryogenic treatment (CT) for 12, 24, and 36 h on tungsten carbide cutting bits used in mine machineries, focusing on its effects on cutting force, energy consumption, and tool wear during lab-scale linear rock cutting. Microstructural analysis and hardness testing follow CT, revealing improvements in hardness, the formation of new compounds, and the presence of eta carbides. Analysis of linear rock cutting experiments shows that longer holding periods under CT lead to reduced cutting force, energy consumption, and tool wear. Comparing CT 24 to untreated bit at a cutting speed of 200 m/s, CT 24 demonstrates reduction in specific energy by 39.35 %, 41.13 %, and 29.39 % at depth of cut (DoC) of 2 mm, 4 mm, and 6 mm, respectively. Additionally, CT 24 exhibits significantly lower wear rates (79.24 %, 85.44 %, and 85.01 %) compared to UT bits at the same cutting speed. Microstructural analysis identifies multiple wear mechanisms in both treated and untreated worn tools. To optimize the cutting process for mining efficiency, grey relational analysis and Python-based non-dominant sorting are employed. Grey relational analysis identifies 24-h CT, a cutting speed of 200 m/s, and a 2 mm depth of cut as optimal. Non-dominant sorting suggests 24-h CT, a cutting speed of 200 m/s, and 2–4 mm cut depth for optimal results. Pareto solutions indicate specific energy ranging from 14.96 to 9.20 kWh/m 3 and wear rates ranging from 0.33 to 0.39 × 10 −4 cm 3/cm. Insights from this study offer valuable guidance for the mining industry to enhance cutting tool efficiency and promote environmentally sustainable mining practices.
Source: expertdata · Quality: candidate unverified · Source record ↗
References (28)
Show source-provided references
1. A development in rock cutting technology10.1016/S1365-1609(99)00107-0 ↗
2. Wear assessment of conical pick used in coal cutting operation10.1007/s00603-014-0680-z ↗
3. Bhirud · 2016
4. Technical, economic and environmental review of the lubrication/cooling systems used in machining processes10.1016/j.proeng.2017.04.075 ↗
5. Technical performance of nano-layered CNC cutting tool inserts – An extensive review10.1016/j.matpr.2020.02.731 ↗
6. Techno-economic analysis of blanking punch life improvement by environment friendly cryogenic treatment10.1016/j.jclepro.2016.12.013 ↗
7. Environmental, technological and economical aspects of cryogenic assisted hard machining operation of inconel 718: a step towards green manufacturing10.1016/j.jclepro.2022.130483 ↗
8. Identification of optimum binder phase compositions for improved WC hard metals10.1016/0025-5416(88)90502-2 ↗
9. Microstructure and properties of coarse-grained WC–10Co cemented carbides with different carbon contents during heat treatments10.1007/s12598-019-01276-5 ↗
10. Investigation of phase structure of cobalt and its effect in WC–co cemented carbides before and after deep cryogenic treatment10.1016/j.ijrmhm.2018.03.010 ↗
11. Improvement of tool life of cryogenically treated P-30 tools
12. An insight into microstructure and machining performance of deep cryogenically treated cemented carbide inserts10.1016/j.jmapro.2020.09.001 ↗
13. Effects of deep cryogenic treatment for tungsten carbide-iron cemented carbide10.1016/j.ijrmhm.2021.105649 ↗
14. Impact of cryogenic treatment on the performance of coated tungsten carbide inserts during machining of EN24 grade alloy steel
15. Cutting tool wear prediction based on the multi-stage wiener process10.1007/s00170-023-12648-8 ↗
16. Study of using cutting chip color to the tool wear prediction10.1007/s00170-020-05354-2 ↗
17. Effects of different cutting patterns and experimental conditions on the performance of a conical drag tool10.1007/s00603-017-1172-8 ↗
18. Efficiency of rock cutting and wear behavior of coated bits via lab-scale linear rock-cutting machine: experimental approach10.1061/(ASCE)GM.1943-5622.0002603 ↗
19. Investigation of the effects of cryogenic treatment applied at different holding times to cemented carbide inserts on tool wear10.1016/j.ijmachtools.2014.06.007 ↗
20. Flank wear and machining performance of cryogenically treated tungsten carbide inserts10.1080/10426914.2011.557128 ↗
21. Bal · 2012
22. Effect of cryogenic treatment on WC–co cemented carbides10.1016/j.msea.2010.11.009 ↗
23. Implications of cryogenic treatment on microstructure, phase formation, mechanical and tribological properties of tungsten carbide cutting bits with varying cobalt content for mining applications10.1016/j.ijrmhm.2023.106421 ↗
24. Cryogenic thermal conductivity measurements on candidate materials for space missions10.1016/j.cryogenics.2017.10.010 ↗
25. Research on cutting-temperature field and distribution of heat rates among a workpiece, cutter, and Chip for high-speed cutting based on analytical and numerical methods10.1007/s11223-014-9549-3 ↗
26. Wearing mechanisms of picks used in continuous miner machine for coal cutting
27. Wear assessment of conical pick used in coal cutting operation10.1007/s00603-014-0680-z ↗
28. Microstructural and tribological characterization of cryogenic treated WC-co cutting bits under different holding times for rock cutting applications10.1007/s11665-023-08291-9 ↗