journal article·2013-03

Effect of interlayers on the structure and properties of TiAlN based coatings on WC-Co cemented carbide substrate

Hao Du, Haibo Zhao, Ji Xiong, Guang Xian

Publisher page

Abstract

Abstract Two interlayers (Ti and Cr) have been evaluated with respect to their influence on the structure and growth of TiAlN based coatings on WC-Co cemented carbide by a non-commercial hybrid PVD (physical vapor deposition) coater by Sichuan University in China. The structure and the growth morphology were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The diffusion of interlayer was tested by Energy Diffraction Spectrum (EDS). Nanoindentation techniques and Rockwell HRC indentations were carried out to investigate the mechanical properties. The results show that the structure and the growth style change in the coatings on Cr interlayer, and this can be explained by thermodynamic theories. Cr interlayer exhibits a better diffusion compared with Ti interlayer, partly resulting in the transition from columnar crystal to equiaxed crystal. Columnar crystals disappear with the addition of Si, too. Due to the diffusion of Cr interlayer and the growth style changes in the coating, a transition zone is formed, and it is estimated to improve the adhesion. Good adhesion occurs in the coating with Cr interlayer. The hardness of TiAlN on Cr interlayer increases, and the Ti/(Ti,Si,Al)N coating shows the hardness as high as 40.0Gpa.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Industrial applications of superhard nanocomposite coatings10.1016/j.surfcoat.2008.05.038 ↗
2. Tribological properties of (Ti, Al)N coatings deposited at different bias voltages using the cathodic arc technique10.1016/S0257-8972(01)01296-8 ↗
3. Microstructure, oxidation and H2-permeation resistance of TiAlN films deposited by DC magnetron sputtering technique10.1016/j.surfcoat.2003.10.021 ↗
4. Deposition and characterization of TiAlN and multi-layered TiN/TiAlN coatings using unbalanced magnetron sputtering10.1016/S0257-8972(98)00684-7 ↗
5. Improvement of high-temperature oxidation resistance of titanium nitride and titanium carbide films by aluminum ion implantation10.1016/S0257-8972(98)00380-6 ↗
6. Phase transition and properties of Ti–Al–N thin films prepared by r.f.-plasma assisted magnetron sputtering10.1016/S0040-6090(98)01364-9 ↗
7. An investigation of unbalanced-magnetron sputtered TiAlN films on SKH51 high-speed steel10.1016/S0257-8972(99)00636-2 ↗
8. Effects of ion bombardment on properties of d.c. sputtered superhard (Ti, Si, Al)N nanocomposite coatings10.1016/S0257-8972(01)01578-X ↗
9. Characterization and properties Ti–Al–Si–N nanocomposite coatings prepared by middle frequency magnetron sputtering10.1016/j.apsusc.2011.06.086 ↗
10. Deposition and characterization of TiAlN/Si3N4 Superhard nanocomposite coatings prepared by reactive direct current unbalanced magnetron sputtering10.1016/j.vacuum.2006.07.003 ↗
11. Superhard nanocomposite Ti–Al–Si–N films deposited by reactive unbalanced magnetron sputtering10.1016/j.mseb.2006.06.043 ↗
12. Influence of Si content on structure and mechanical properties of TiAlSiN coatings deposited by multi-plasma immersion ion implantation and deposition10.1016/S1003-6326(11)61628-2 ↗
13. High temperature tribological characterisation of TiAlSiN coatings produced by cathodic arc evaporation10.1016/j.surfcoat.2010.09.004 ↗
14. Microstructure and hardness of nanocrystalline Ti1−x−yAlxSiyN thin films10.1016/j.msea.2005.11.086 ↗
15. In-service behaviour of (Ti, Si, Al)Nx nanocomposite films10.1016/j.wear.2011.08.018 ↗
16. The effect of substrate pretreatments and HPPMS-deposited adhesive interlayers' materials on the cutting performance of coated cemented carbide inserts10.1016/j.cirp.2010.03.065 ↗
17. The influence of metallic interlayers on the adhesion of PVD TiN coatings on high-speed steel10.1016/j.wear.2006.11.053 ↗
18. Effects of Cr interlayer on mechanical and tribological properties of Cr–Al–Si–N nanocomposite coating10.1016/S1003-6326(11)61062-5 ↗
19. Effect of film thickness and Ti interlayer on the structure and properties of nanocrystalline TiN thin films on AISI D2 steel10.1016/j.surfcoat.2007.01.012 ↗
20. Effect of Cr interlayer on the adhesion and corrosion enhancement of nanocomposite TiN-based coatings deposited on stainless steel 41010.1016/j.tsf.2010.12.020 ↗
21. The structure and properties of chromium nitride coatings deposited using dc, pulsed dc and modulated pulse power magnetron sputtering10.1016/j.surfcoat.2009.12.013 ↗
22. Structural, mechanical, and tribological studies of Cr–Ti–Al–N coating with different chemical compositions10.1016/j.tsf.2007.07.127 ↗
23. Dependence of morphology of pulsed-laser deposited coatings on temperature: a kinetic Monte Carlo simulation10.1016/j.surfcoat.2004.09.027 ↗
24. Study on the early stage of thin film growth in pulsed beam deposition by kinetic Monte Carlo simulation10.1016/S0257-8972(02)00220-7 ↗
25. Connection of the generalized Shuttleworth equation for the elastic spherical electrode with the Laplace formula and the Gibbs adsorption equation10.1016/S0013-4686(02)00728-4 ↗
26. The line adsorption equation: the one-dimensional counterpart of the Gibbs adsorption equation10.1016/S0927-7757(99)00322-2 ↗
27. New views of the Gibbs adsorption equation10.1016/j.physa.2006.08.007 ↗
28. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behavior10.1016/S0043-1648(00)00488-9 ↗
29. Effect of ductile layers in mechanical behaviour of TiAlN thin coatings10.1016/S0924-0136(03)00454-0 ↗