Tribological and corrosion properties of β-TiNb alloy modified by plasma electrolytic oxidation: Evaluation of the synergistic effect of composition and processing time through statistical evaluation
Source abstract
Abstract
For bone implants, β‑titanium alloy is promising mainly due to its low modulus of elasticity; the disadvantage may be the insufficient wear-resistant and corrosion-resistant properties. Bulk β-Ti39Nb alloy and magnetron sputtered β-Ti39Nb alloy were surface modified by micro-arc oxidation (MAO) technique in an alkaline solution. The aim was to define in detail the relationships between the chemical composition of the surfaces, their morphology, and the tribological and corrosion properties. The structural properties, phase and chemical composition of the coating, tribological and corrosion properties were studied in detail using SEM, EDX, XRD, XPS and EDX analysis. The particles released during tribological measurements were evaluated using SEM/EDX particle analysis followed by statistical treatment of the particle parameters (material, size, area) using multiple factor analysis and principal component analysis. The results show that increased wear resistance was achieved for both magnetron-sputtered layers and bulk materials. The friction coefficient for the MAO-Al 2O 3 friction pair samples ranged from 0.5 to 0.6 in phosphate-buffered solution. For powder metallurgy-prepared bulk β-Ti39Nb, MAO represents an effective tool to reduce the high friction coefficient from 1.0 to 1.1 to values of 0.4–0.5. The results of the particle analysis confirm that with increasing MAO process time, there is an increase in the number of released particles with increased Si content, which correlates well with the results of tribological tests. The evaluated tribological parameters wear rate, track width, and the chemical elements Si and Ti have a significant weak positive correlation, confirming that the presence of these elements in MAO coatings affects the resulting tribological parameters. Multivariate analysis revealed the greatest correlation of the resulting particle composition with the tribological attributes and original material and, to a lesser extent, with the process time.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Tribocorrosion behaviour of Ti6Al4V and AISI 316L in simulated normal and inflammatory conditions10.1016/j.wear.2019.202966 ↗
2. Comparative study on the corrosion behaviour of Tip–Nb and TMA alloys for dental application in various artificial solutions10.1016/j.msec.2010.12.010 ↗
3. Wear performance of layered (TiNb)C reinforcement in surface of TiNb alloy10.1016/j.surfcoat.2021.126955 ↗
4. Surface characteristics and bioactivity of an anodised titanium surface10.5051/jpis.2013.43.4.198 ↗
5. The effect of process parameters and characterisation for the laser cladding of cBN based composite clad over the Ti6Al4V alloy10.1016/j.matchemphys.2022.126410 ↗
6. Thermal spray coatings on orthopedic devices: when and how the FDA reviews your coatings10.1007/s11666-018-0759-2 ↗
7. Duplex treatment of arc plasma nitriding and PVD TiN coating applied to dental implant screws10.1016/j.surfcoat.2022.128449 ↗
8. A microabrasion wear study of nitrided α-Ti and β-TiNb PVD metallic thin films, pre-deposited onto titanium alloy substrates10.1016/j.surfcoat.2022.128423 ↗
9. Production of hydroxyapatite layers on the plasma electrolytically oxidised surface of titanium alloys10.1016/j.msec.2014.07.030 ↗
10. Study of HVOF-sprayed hydroxyapatite/titania graded coatings under in-vitro conditions10.1016/j.jmrt.2020.10.005 ↗
11. Wear and adhesion resistance of duplex coatings deposited on Ti6Al4V alloy using MAO and CFUBMS10.1016/j.surfcoat.2012.10.006 ↗
12. Hybrid coatings for orthopaedic implants formed by physical vapour deposition and microarc oxidation10.1016/j.matdes.2022.110811 ↗
13. On the role of Nb-related sites of an oxidised β-TiNb alloy surface in its interaction with osteoblast-like MG-63 cells10.1016/j.msec.2012.12.073 ↗
14. Growth of a TiNb adhesion interlayer for bioactive coatings10.1016/j.msec.2017.07.013 ↗
15. Ti based biomaterials, the ultimate choice for orthopaedic implants – a review10.1016/j.pmatsci.2008.06.004 ↗
16. Structure and properties of micro-arc calcium phosphate coatings on pure titanium and Ti-40Nb alloy10.1016/S1003-6326(17)60014-1 ↗
17. The plasma electrolytic oxidation (PEO) coatings to enhance in-vitro corrosion resistance of Ti–29Nb–13Ta–4.6Zr alloys: the combined effect of duty cycle and the deposition frequency10.1016/j.surfcoat.2019.06.025 ↗
18. Fabrication and characterisation of microarc oxidation films on Ti-39Nb-6Zr alloy at different voltages in KOH electrolyte10.1016/j.jallcom.2017.07.008 ↗
19. Formation and characterisation of wear-resistance PEO coatings formed on β-titanium ally at different electrolyte temperatures10.1016/j.apsusc.2012.07.104 ↗
20. Recent progress in surface modification of metals coated by plasma electrolytic oxidation: principle, structure, and performance10.1016/j.pmatsci.2020.100735 ↗
21. Final surface modification for better wear resistance of ceramic coating on cast AlSi10Mg alloy10.1016/j.ceramint.2022.09.224 ↗
22. Ta-containing coatings formed on titanium and stainless steel by plasma electrolytic oxidation and/or extraction pyrolysis10.1016/j.surfcoat.2014.06.057 ↗
23. Effect of additive for preparation of reduced-porosity ceramic layer on Ti-6Al-4V alloy for orthopaedic and trauma implants
24. Development of anodic coatings on aluminium under sparking conditions in silicate electrolyte10.1016/j.corsci.2006.05.046 ↗
25. Characterisation of plasma electrolytic oxidation coatings on Zircaloy-4 formed in different electrolytes with AC current regime10.1016/j.electacta.2011.07.034 ↗
26. Preparation and tribological properties of self-lubricating TiO2/graphite composite coating on Ti6Al4V alloy10.1016/j.apsusc.2012.05.051 ↗
27. XPS analysis of SiC films prepared by radio frequency plasma sputtering10.1016/j.phpro.2012.03.524 ↗
28. Bridging, non-bridging and free (O2−) oxygen in Na2O-SiO2 glasses: an X-ray photoelectron spectroscopic (XPS) and nuclear magnetic resonance (NMR) study10.1016/j.jnoncrysol.2010.09.031 ↗
29. Effect of ZrO2 particle on the performance of micro-arc oxidation coatings on Ti6Al4V10.1016/j.apsusc.2015.03.051 ↗
30. Dong · 2010 · 58
31. A review on adhesion strength of peo coatings by scratch test method10.1142/S0218625X18300046 ↗
32. In vitro corrosion study of different TiO2 nanotube layers on titanium in solution with serum proteins10.1016/j.colsurfb.2011.01.033 ↗
33. Determination of diffusion coefficients using impedance spectroscopy data10.1149/2.1151814jes ↗
34. Electrochemical corrosion and passivation behavior of titanium and its Ti-6AL-4V alloy in low and highly concentrated HBr solutions10.1016/S1452-3981(23)19695-7 ↗
35. Correlation between defect density and corrosion parameter of electrochemically oxidised aluminum
36. Effect of pore structures on corrosion resistance of porous Ni3Al intermetallics10.1016/S1003-6326(14)63495-6 ↗
37. Effect of bio-functional MAO layers on the electrochemical behaviour of highly porous Ti10.1016/j.surfcoat.2020.125487 ↗
38. Deposition of duplex MAO layer/nanostructured titanium dioxide composite coatings on mg-1%ca alloy using a combined technique of air plasma spraying and micro arc oxidation10.1016/j.jallcom.2015.07.200 ↗