journal article·2018-01

Mechanical properties and fracture behavior of B 4 C-nano/micro SiC composites produced by pressureless sintering

Alireza Moradkhani, Hamidreza Baharvandi

Publisher page

Abstract

Abstract In the present work, boron carbide (B 4 C) powder was mixed separately with various quantities (2.5, 5, 7.5 and 10 vol%) of nano/micro silicon carbide (nano/micro SiC) in a high-energy mill and in the presence of isopropanol solution. The resulting compounds were then dried and formed into test specimens at a pressure of 80 MPa. Next, using the pressureless sintering technique, the obtained pieces were sintered at temperatures of 2100, 2150 and 2200 °C. The effects of additives and sintering temperature on the grain size and mechanical properties of the produced specimens (e.g. flexural strength and fracture toughness ( K IC )) were studied, and the fracture behavior of these samples was evaluated through microstructural analysis. By adding nano/micro SiC, the results indicate a considerable increase in the flexural strength (up to 860 MPa) and K IC value (up to 6 MPa m 1/2 ) of specimens. Also, it was found that by increasing the vol% of nano/microSiC additive, not only the produced composites become fine-grained, but also their fracture mode changes mostly from intergranular to transgranular.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Boron carbide, production, properties and applications
2. A low temperature synthesis crystalline B4C ultrafine powders10.1016/S0038-1098(03)00627-6 ↗
3. Boron carbide—a comprehensive review10.1016/0955-2219(90)90048-K ↗
4. A new family of reaction bonded ceramics for armor applications
5. Carbothermal route for preparation of boron carbide powder from boric acid-citric acid gel precursor10.1016/S0022-3115(02)00704-3 ↗
6. A. K. Kundsen and William Refaniello, “Titanium diborid boron carbide composites with high hardness and toughness”, U. S. Patent 4957884 (1990).
7. Borides of IVb group
8. Atomic structure and vibrational properties of icosahedral α-boron and B4C boron carbide10.1016/S0927-0256(00)00009-4 ↗
9. Effect of fast neutron irradiation on the structure of boron carbide
10. Boron carbide-zirconium boride in situ composites by the reaction pressureless sintering of boron carbide-zirconia mixtures
11. Effects of high pressure structure and properties of materials based on boron carbide
12. Mechanisms of toughening and strengthening in ceramic-based nanocomposites10.1016/S0167-6636(02)00129-1 ↗
13. Determining the fracture resistance of B4C-NanoSiB6 nanocomposite by Vickers indentation method and exploring its mechanical properties10.1016/j.ijrmhm.2017.07.009 ↗
14. Synthesis and properties of hot pressed B4C–TiB2 ceramic composite10.1016/j.msea.2010.07.101 ↗
15. The design of a novel neutron shielding B4C/Al composite containing Gd10.1016/j.matdes.2016.07.140 ↗
16. Microstructure and properties of B4C-SiC composites prepared by polycarbosilane-coating/B4C powder route10.1016/j.jeurceramsoc.2013.10.039 ↗
17. High-temperature plastic deformation of spark plasma sintered boron carbide-based composites: the case study of B4C–SiC with/without graphite (g)10.1016/j.jeurceramsoc.2015.12.016 ↗
18. Processing of reaction-bonded B4C–SiC composites in a single-mode microwave cavity10.1016/j.ceramint.2012.07.047 ↗
19. Near-net shape manufacture of B4C-Co and ZrC-Co composites by slip casting and pressureless sintering10.1016/j.jeurceramsoc.2017.07.024 ↗
20. An X-ray diffraction analysis of boron carbide, B13C210.1016/0022-5088(76)90072-2 ↗
21. Pressureless sintered Al2O3-SiC nanocomposites10.1016/j.ceramint.2007.05.005 ↗
22. Engineering properties of carbides
23. Gradients in elastic modulus for improved contact-damage resistance: part II, the silicon nitride–silicon carbide system10.1016/S1359-6454(01)00201-4 ↗
24. Processing and properties of Al2O3/SiC nanocomposites10.1111/j.1365-2818.1995.tb03561.x ↗
25. Microfracture from thermal expansion anisotropy. I Single phase systems10.1016/0001-6160(78)90097-4 ↗
26. Measurement of stress due to thermal expansion anisotropy in Al2O310.1111/j.1151-2916.1982.tb10390.x ↗
27. Pressureless sintering of boron carbide10.1016/j.ceramint.2009.07.034 ↗
28. Effect of Al addition on pressureless sintering of B4C10.1016/j.ceramint.2008.03.003 ↗
29. Revisiting the mechanical behavior of alumina/silicon carbide nanocomposites10.1016/S1359-6454(98)00193-1 ↗
30. Linear intercept technique for measuring grain size in two-phase polycrystalline ceramics10.1111/j.1151-2916.1972.tb11224.x ↗
31. ASTM C1161-02c(2008)e1 · 2008
32. ASTM B311-93(2002)e1 · 2002
33. ASTM C769-98(2005) · 2005
34. ASTM C1327-08 · 2008
35. Anstis · J. Am. Ceram. Soc. · 1981 · 64 · 53210.1111/j.1151-2916.1981.tb10320.x ↗
36. Moradkhani · J. Adv. Ceram. · 2013 · 2 · 8710.1007/s40145-013-0047-z ↗
37. 1999
38. The effect of nanoscale SiC particles on the microstructure of B4C ceramics10.1016/S0272-8842(99)00069-3 ↗
39. Structure and properties of B4C-SiC composites10.1007/s11106-005-0080-8 ↗
40. A model for the inverse Hall–Petch Relation of nanocrystalline materials10.1016/j.msea.2005.06.073 ↗
41. Effect of second phase on mechanical properties and toughening of Al2O3 based ceramic composites10.1016/0961-9526(95)00069-Y ↗
42. Microstructural nature of strengthening and toughening in Al2O3-SiC(p) nanocomposites10.1023/A:1004729015686 ↗
43. Hankla · 2008 · 1
44. Mechanical properties and microstructure of B4C–NanoTiB2–Fe/Ni composites under different sintering temperatures10.1016/j.msea.2016.04.034 ↗
45. Fracture toughness determination and microstructure investigation of a B4C–NanoTiB2 composite with various volume percent of Fe and Ni additives10.1016/j.matdes.2014.05.039 ↗
46. Determining the fracture resistance of B4C-NanoSiB6 nanocomposite by Vickers indentation method and exploring its mechanical properties10.1016/j.ijrmhm.2017.07.009 ↗
47. Microstructural analysis of fracture surfaces and determination of mechanical properties of Al2O3–SiC–MgO nanocomposites10.1016/j.ijrmhm.2017.05.004 ↗
48. Densification behaviour and mechanical properties of B4C–SiC intergranular/intragranular nanocomposites fabricated through spark plasma sintering assisted by mechanochemistry10.1016/j.ceramint.2016.10.150 ↗
49. Microstructures and mechanical properties of B4C–SiC intergranular/intragranular nanocomposite ceramics fabricated from B4C, Si, and graphite powders10.1016/j.jeurceramsoc.2014.02.032 ↗
50. Preparation of B4C–SiC composite ceramics through hot pressing assisted by mechanical alloying10.1016/j.ijrmhm.2013.04.012 ↗
51. Analysis of the residual stress in Al2O3-SiC nanocomposites10.1007/BF02916780 ↗