Nanoindentation induced plasticity in equiatomic MoTaW alloys by experimentally guided machine learning molecular dynamics simulations
Source abstract
Abstract
Refractory complex concentrated alloys (RCCA) exhibit exceptional strength and thermal stability, yet their plastic deformation mechanisms under complex contact loading remain insufficiently understood. Here, the nanoindentation response of an equiatomic MoTaW alloy is investigated through a combined experimental and atomistically resolved modeling approach. Spherical nanoindentation experiments are coupled with large scale molecular dynamics simulations employing a tabulated low dimensional Gaussian Approximation Potential (tabGAP), enabling near DFT accuracy. A physics based similarity criterion, implemented via PCA of load-displacement curves, is used to identify mechanically representative experimental responses for quantitative comparison with simulations. Indentation stress-strain curves are constructed yielding excellent agreement in the elastic regime between experiment and simulation, with reduced Young's moduli of approximately 270 GPa. Generalized stacking fault energy calculations reveal elevated unstable stacking- and twinning-fault energies in MoTaW relative to pure refractory elements, indicating suppressed localized shear and a preference for dislocation-mediated plasticity. Atomistic analyses demonstrate a strong crystallographic dependence of plastic deformation, with symmetric {110}<111> slip activation and four-fold rosette pile-ups for the [001] orientation, and anisotropic slip, strain localization, and enhanced junction formation for [011]. Local entropy and polyhedral template matching analyses further elucidate dislocation network evolution and deformation-induced local structural transformations. Overall, this study establishes a direct mechanistic link between fault energetics, orientation-dependent dislocation activity, and experimentally observed nanoindentation behavior in RCCA.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. High temperature strength of refractory complex concentrated alloys10.1016/j.actamat.2019.06.032 ↗
2. Ductility mechanisms in complex concentrated refractory alloys from atomistic fracture simulations10.1038/s41524-025-01810-3 ↗
3. Remarkably high fracture toughness of hfnbtatizr refractory high-entropy alloy10.1016/j.jmst.2022.01.017 ↗
4. Synthesis and characterization of the ceramic refractory metal high entropy nitride thin films from Cr-Hf-Mo-Ta-W system10.1016/j.surfcoat.2022.128987 ↗
5. Synthesis and characterization of ceramic high entropy carbide thin films from the Cr-Hf-Mo-Ta-W refractory metal system10.1016/j.surfcoat.2024.130839 ↗
6. Strength vs temperature for refractory complex concentrated alloys (RCCAs): a critical comparison with refractory BCC elements and dilute alloys10.1016/j.actamat.2024.119692 ↗
7. The origin and control of interstitial impurities in refractory complex concentrated alloys10.1016/j.jallcom.2024.177520 ↗
8. High temperature oxidation behaviors of equimolar NbTiZrV and NbTiZrCr refractory complex concentrated alloys (RCCAs)10.1016/j.jallcom.2017.09.164 ↗
9. Microstructure and mechanical properties of Mo-Ta-W refractory multi-principal element alloy thin films for hard protective coatings10.1016/j.surfcoat.2021.128005 ↗
10. Machine learning interatomic potentials as emerging tools for materials science10.1002/adma.201902765 ↗
11. Nanoindentation of tungsten: from interatomic potentials to dislocation plasticity mechanisms
12. Atomistic-level analysis of nanoindentation-induced plasticity in arc-melted NiFeCrCo alloys: the role of stacking faults10.1063/5.0200717 ↗
13. Plastic deformation mechanisms in BCC single crystals and equiatomic alloys: insights from nanoindentation
14. Unraveling deformation mechanisms around FCC and BCC nanocontacts through slip trace and pileup topography analyses10.1016/j.actamat.2016.11.067 ↗
15. High-temperature deformation behavior of Co-free nonequiatomic CrMnFeNi alloy
16. Daramola · Comput. Mater. Sci. · 2022 · 20310.1016/j.commatsci.2021.111165 ↗
17. Perspective: machine learning potentials for atomistic simulations
18. Machine learning interatomic potentials and long-range physics10.1021/acs.jpca.2c06778 ↗
19. A machine learning interatomic potential for high entropy alloys10.1016/j.jmps.2024.105639 ↗
20. Modeling refractory high-entropy alloys with efficient machine-learned interatomic potentials: defects and segregation10.1103/PhysRevB.104.104101 ↗
21. Radiation damage and phase stability of Alx CrCuFeNiy alloys using a machine-learned interatomic potential
22. Simple machine-learned interatomic potentials for complex alloys
23. Atomic-scale study of ultrasonic elliptical vibration-assisted cutting of InP crystals via molecular dynamics10.1016/j.jmrt.2026.01.137 ↗
24. Microstructural evolution and mechanical response of ion-irradiated Fe-9Cr alloys: insights from nanoindentation10.1016/j.jnucmat.2025.156109 ↗
25. Gaussian approximation potentials for body-centered-cubic transition metals
26. Gaussian approximation potentials: the accuracy of quantum mechanics, without the electrons10.1103/PhysRevLett.104.136403 ↗
27. Jacobs · Curr. Opin. Solid State Mater. Sci. · 2025 · 3510.1016/j.cossms.2025.101214 ↗
28. Angular-dependent interatomic potential for large-scale atomistic simulation of W-Mo-Nb ternary alloys10.1016/j.commatsci.2023.112734 ↗
29. Unraveling ductility enhancement mechanisms in W-Ta alloys using machine-learning potential
30. Unsupervised calculation of free energy barriers in large crystalline systems10.1103/PhysRevLett.120.135503 ↗
31. Generalized stacking fault energies and Peierls stresses in refractory body-centered cubic metals from machine learning-based interatomic potentials10.1016/j.commatsci.2021.110364 ↗
32. Nanoindentation of single crystalline Mo: atomistic defect nucleation and thermomechanical stability10.1016/j.msea.2021.141912 ↗
33. Assessment and optimization of the fast inertial relaxation engine (FIRE) for energy minimization in atomistic simulations and its implementation in LAMMPS10.1016/j.commatsci.2020.109584 ↗
34. LAMMPS - a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales10.1016/j.cpc.2021.108171 ↗
35. Visualization and analysis of atomistic simulation data with OVITO-the open visualization tool10.1088/0965-0393/18/1/015012 ↗
36. Automated identification and indexing of dislocations in crystal interfaces10.1088/0965-0393/20/8/085007 ↗
37. Effect of alloying elements on stacking fault energy and ductility of tungsten10.1016/j.jallcom.2017.12.042 ↗
38. Planar defect nucleation and annihilation mechanisms in nanocontact plasticity of metal surfaces10.1103/PhysRevLett.109.075502 ↗
39. Comparing interatomic potentials in calculating basic structural parameters and Peierls stress in tungsten-based random binary alloy10.1088/1402-4896/acf533 ↗
40. First-principles study of the phase stability and the mechanical properties of W-Ta and W-Re alloy10.1063/1.4875024 ↗
41. Machine learning in Python, Pedregosa et al.
42. A high-throughput framework for pile-up correction in high-speed nanoindentation maps10.1016/j.matdes.2025.113708 ↗
43. Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques10.1557/JMR.1998.0146 ↗
44. Measurement of mechanical properties by ultra-low load indentation10.1016/S0921-5093(98)00724-2 ↗
45. Indentation of ceramics with spheres: a century after Hertz10.1111/j.1151-2916.1998.tb02580.x ↗
46. Critical review of analysis and interpretation of nanoindentation test data10.1016/j.surfcoat.2005.03.018 ↗
47. Spherical nanoindentation stress–strain curves10.1016/j.mser.2015.02.001 ↗
48. Understanding pop-ins in spherical nanoindentation10.1063/1.4898698 ↗
49. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
50. A new approach to measure the elastic–plastic properties of bulk materials using spherical indentation10.1016/j.actamat.2005.08.020 ↗
51. Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility10.1038/nmat3544 ↗
52. Orientation dependence of the nano-indentation behaviour of pure Tungsten10.1016/j.scriptamat.2020.08.014 ↗
53. Entropy based fingerprint for local crystalline order10.1063/1.4998408 ↗
54. Misfit-energy-increasing dislocations in vapor-deposited CoFe/NiFe multilayers