Effects of Al2O3@Ni core-shell powders on the microstructure and mechanical properties of Ti(C,N) cermets via spark plasma sintering
Source abstract
Abstract
To investigate the effects of the core-shell powders on the microstructure and mechanical properties of Ti(C,N) cermets, Ni-coated Al 2O 3 (Al 2O 3 @Ni) core-shell powders were made using the heterogeneous precipitation-thermal reduction method, and Ti(C,N) cermets with Al 2O 3 @Ni added were made using spark plasma sintering (SPS). The results showed that the addition of powders prevents direct contact between Al 2O 3 and Ti(C,N) ceramic particles, that the distribution of Ni and Al 2O 3 in the matrix causes a more uniform discharge of SPS, that the grain size was smaller and the size difference between grains was smaller, and that fine grain strengthening improves the mechanical properties of cermet materials. When the sintering temperature was 1500 °C, the Ti(C,N) cermets had the best all-around mechanical performance; their flexural strength was 1277 ± 21 MPa, hardness was 17.06 ± 0.25 GPa, and fracture toughness was 7.42 ± 0.15 MPa·m 1/2.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Formation of self-lubricant surface layer on the Ti(C, N)-based cermets[J]10.1016/j.vacuum.2017.06.024 ↗
2. High temperature oxidation resistance of (Ti,Ta)(C,N)-based cermets10.1016/j.corsci.2015.10.001 ↗
3. Oxidation resistance and thermal stability of Ti(C,N) and Ti(C,N,O) coatings deposited by chemical vapor deposition10.1016/j.ijrmhm.2015.08.006 ↗
4. Microstructure and mechanical properties of TiC-TiN based cermets for tools application[J]10.1016/j.ijrmhm.2008.10.006 ↗
5. Spark plasma sintering: a powerful tool to develop new silicon nitride-based materials[J]10.1016/j.jeurceramsoc.2010.01.025 ↗
6. On the preparation of bio-, nano- and structural ceramics and composites by spark plasma sintering[J]10.1016/S1293-2558(02)00086-9 ↗
7. Cutting performance and wear characteristics of Ti(C,N)-based cermet tool in machining hardened steel10.1016/j.ijrmhm.2015.06.006 ↗
8. Effects of the addition of multi-walled carbon nanotubes on the microstructure and properties of Ti(C,N)-based cermets prepared by spark plasma sintering10.1016/j.matchar.2022.112289 ↗
9. Microstructure and mechanical properties of Ti (C, N) based cermets reinforced with different ceramic particles processed by spark plasma sintering[J]10.1016/j.ceramint.2017.05.103 ↗
10. Improvement of microstructure, mechanical properties and cutting performance of Ti(C,N)-based cermets by ultrafine La2O3 additions10.1016/j.ceramint.2021.03.328 ↗
11. Fracture behaviors of Ti(C, N)-based cermets with different contents of metal binder[J]10.1016/j.ceramint.2022.07.183 ↗
12. Simultaneously improved strength and toughness of in situ bi-phased TiB2-Ti(C,N)-Ni cermets by Mo addition10.1016/j.jallcom.2019.153068 ↗
13. Influence of Mo contents on microstructures and mechanical properties of (Ti,W,Mo)(CN)-Ni cermets[J]10.1016/j.ceramint.2018.11.236 ↗
14. Effects of metal binder on the microstructure and mechanical properties of Ti(C,N)-based cermets10.1016/j.jallcom.2015.05.059 ↗
15. Electrostatic self-assembly design of core@shell structured Al2O3@C nanospheres towards high-efficiency and damage-free polishing sapphire wafer[J]10.1016/j.jallcom.2020.158248 ↗
16. Friction and wear behavior of Ti(C,N) self-lubricating cermet materials with multilayer core-shell microstructure10.1016/j.ijrmhm.2021.105629 ↗
17. Fabrication of high strength and plasticity of iron matrix composite with Ti@(TiC+α-Fe) core-shell structure by near-eutectic temperature hot pressing sintering[J]10.1016/j.vacuum.2021.110574 ↗
18. An advanced self-lubricating ceramic composite with the addition of core-shell structured h-BN@Ni powders[J]10.1016/j.ijrmhm.2017.12.038 ↗
19. Microstructure and mechanical properties of Ti(C,N)-based cermets fabricated using Ni-coated mixed powders10.1016/j.ceramint.2020.03.276 ↗
20. Reaction coupling preparation of high sintering activity boron carbide nano-powders[J]10.1016/j.ceramint.2016.01.083 ↗
21. Effect of C content on the surface gradient structure of (Ti,Mo)(C,N) and Ti(C,N)-based cermets[J]10.1016/j.jmrt.2021.12.021 ↗
22. Microstructural and mechanical characterization of spark plasma sintered TiC ceramics with TiN additive[J]10.1016/j.ceramint.2020.04.215 ↗
23. Effect of WC-Co granules on mechanical properties and microstructure of Ti(C,N)-based cermets10.1016/j.ceramint.2016.06.143 ↗
24. Sintering technology of Ti(C, N) base cermets[J]10.1016/S1003-6326(10)60134-3 ↗
25. Microstructure of Ti(C,N)-based cermets—Influence of sintering temperature[J]10.1016/j.ijrmhm.2022.105897 ↗
26. Study on the formation of core-rim structure in Ti(CN)-based cermets[J]10.1016/j.ijrmhm.2012.03.012 ↗