Preparation of W-Cu functional graded materials with continuous W(Cu) composition distribution by a combination method of sedimentation and infiltration
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (42)
Show source-provided references
1. In situ leading-edge-induced damages of melting and cracking W/Cu monoblocks as divertor target during long-term operations in EAST10.1088/1741-4326/ac3f48 ↗
2. Improving interfacial microstructure and mechanical properties of ODS-W/Cu joints via anodization treatment and spark plasma sintering10.1016/j.jnucmat.2024.155351 ↗
3. Application of tungsten-copper composite heat sink materials to plasma-facing component mock-ups10.1088/1402-4896/ab4142 ↗
4. Effects of deuterium plasma exposure and helium ions irradiation on nanoindentation hardness of tungsten
5. Fundamental effects of copper on dislocation loops and mechanical property of tungsten under irradiation10.1016/j.jnucmat.2021.152838 ↗
6. Topology optimization of tungsten/copper structures for plasma-facing component applications10.1088/1741-4326/ab1ff5 ↗
7. Manufacturing and high heat flux testing of flat-type W/Cu/CuCrZr mock-up by HIP assisted brazing process10.1016/j.fusengdes.2021.112670 ↗
8. Optimized design of a tungsten-copper functionally graded material monoblock for minimal von Mises stress meeting the material operational temperature window10.1088/1741-4326/abe7bb ↗
9. Experiment and simulation investigations on W/Cu components prepared by strong confinement thermal explosive welding
10. Connection reinforcement design of ODS-W/Cu joint: transforming immiscible interface into dual reaction diffusion interface10.1016/j.matchar.2025.115402 ↗
11. Performance assessment of thick W/Cu graded interlayer for DEMO divertor target10.1016/j.fusengdes.2020.111610 ↗
12. Optimization of W/Cu monoblock mock-up with FGM interlayer for CFETR devertor targets10.1016/j.fusengdes.2019.111262 ↗
13. Design optimization of plasma facing component with functional gradient material Cu/W interlayer10.1016/j.fusengdes.2013.04.042 ↗
14. A simple and effective strategy for W-Cu functionally graded materials with continuous gradient10.1016/j.ijrmhm.2024.106974 ↗
15. Improved parallelism of graded W-Cu-SiC materials by adjusting the coefficient of thermal expansion10.1016/j.ceramint.2019.12.239 ↗
16. Additive manufacturing of functional gradient materials: a review of research progress and challenges10.1016/j.jallcom.2023.172642 ↗
17. Fabrication of W-Cu functionally graded materials with high density by particle size adjustment and solid state hot press, comps
18. Functionally graded W-Cu materials prepared from Cu-coated W powders by microwave sintering10.1007/s11665-019-04321-7 ↗
19. A novel approach to fabricate W–Cu functionally graded materials via sedimentation and infiltration method10.1016/j.msea.2021.141276 ↗
20. Fabrication of W/Cu composite coatings by supersonic atmosphere plasma spraying and their anti-ablation performance under oxyacetylene torch10.1016/j.jallcom.2017.01.281 ↗
21. High heat flux testing of tungsten plasma facing materials10.1016/j.jnucmat.2007.04.006 ↗
22. Preparation of W-Cu functionally graded material coated with CVD-W for plasma-facing components10.1016/j.jnucmat.2013.01.326 ↗
23. Continuous W-Cu functional gradient material from pure W to W Cu layer prepared by a modified sedimentation method10.1016/j.net.2022.08.002 ↗
24. A novel approach to fabricate W/Cu functionally gradient materials10.1016/j.ijrmhm.2017.11.021 ↗
25. Fabrication of W-Mo functionally graded materials with smooth changes of composition by Co-sedimentation10.4028/www.scientific.net/KEM.224-226.485 ↗
26. Achieving high-strength W/W-10Cu joints by vacuum diffusion bonding with FeCoCu interlayer10.1016/j.fusengdes.2023.113553 ↗
27. Enhancing comprehensive properties of W/Cu joints through surface grinding and spark plasma sintering10.1016/j.ijrmhm.2025.107160 ↗
28. Recent progress in research on bonding technologies of W/Cu monoblocks as the divertor for nuclear fusion reactors
29. Effect of bonding process on the microstructures and strength of W/steel joints with a W-Cu-Ni interlayer10.1016/j.ijrmhm.2022.105846 ↗
30. Synchronized construction of metallurgical bonding and mechanical interlocking interface in immiscible W/CuCrZr functional gradient material by additive manufacturing10.1016/j.scriptamat.2025.116599 ↗
31. Design of stainless steel porous surfaces by oxide reduction with hydrogen10.1016/j.matdes.2015.07.142 ↗
32. Hydrogen reduction of tungsten oxides: alkali additions, their effect on the metal nucleation process and potassium bronzes under equilibrium conditions10.1016/j.ijrmhm.2016.06.015 ↗
33. Hydrogen reduction behavior and microstructural characteristics of WO3 and WO3-NiO powders10.1016/j.ijrmhm.2018.12.013 ↗
34. The effect of particle size on the densification kinetics of tungsten powder during spark plasma sintering10.1016/j.ijrmhm.2020.105358 ↗
35. Sintering of a nano-crystalline tungsten heavy alloy powder10.1016/j.ijrmhm.2019.01.016 ↗
36. Towards pressureless sintering of nanocrystalline tungsten10.1016/j.actamat.2021.117344 ↗
37. Theoretical study on two sedimentation processes used to form functionally graded materials10.1023/A:1023799825814 ↗
38. Theoretical design of sedimentation applied to the fabrication of functionally graded materials10.1007/s11663-003-0030-0 ↗
39. Discrete element analysis of sedimentary body density of functionally graded materials derived from particle Co-sedimentation10.1088/1742-6596/419/1/012034 ↗
40. Fabrication of functionally graded W Cu composite via variable speed induction sintering and subsequent infiltration10.1016/j.ijrmhm.2022.105857 ↗
41. Thermal shock behaviors of W/Cu joints with different structures10.1016/j.jallcom.2023.171770 ↗
42. Microstructural evolution of graded W-Cu materials under repeated thermal shocks