Tailoring structural integrity of polycrystalline diamond compacts via crystal morphology and particle gradation
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (52)
Show source-provided references
1. Research on polycrystalline diamond compact (PDC) with low residual stress prepared using nickel-based additive10.1016/j.ijrmhm.2010.07.004 ↗
2. Study on cobalt removal process of polycrystalline diamond compact with high efficiency and environmental protection10.1016/j.ijrmhm.2022.106029 ↗
3. Tribological properties of graphene/MoS2 combinations as lubricant additives for polycrystalline diamond compact10.1016/j.ceramint.2024.01.175 ↗
4. Niobium as a new binder for polycrystalline diamond (PCD) sintered via high pressure-high temperature (HPHT)10.1016/j.ijrmhm.2020.105234 ↗
5. Synthesis and characterisation of φ62 mm polycrystalline diamond compact10.1016/j.diamond.2019.107594 ↗
6. Effect of feedstock diamond powder property on microstructure and mechanical properties of polycrystalline diamond compacts10.1016/j.ijrmhm.2023.106102 ↗
7. Effect of diamond powder grain size distribution on mechanical and application properties of PDC10.1016/j.diamond.2025.112367 ↗
8. Microstructural evolution of diamond-based composites at high temperature and high pressure10.3390/ma15248753 ↗
9. Novel high-performance polycrystalline diamond compact enhanced using vanadium additives10.1016/j.ceramint.2024.02.267 ↗
10. Wear resistance and thermal stability enhancement of PDC sintered with ti-coated diamond and cBN10.1016/j.ijrmhm.2020.105278 ↗
11. Covalently armoring graphene on diamond abrasives with unprecedented wear resistance and abrasive performance10.1016/j.ijmachtools.2025.104254 ↗
12. Enhancement of mechanical and thermal properties of diamond particles via vanadium carbide coatings10.1016/j.diamond.2024.111510 ↗
13. Effects of graphene addition on mechanical properties of polycrystalline diamond compact10.1016/j.ceramint.2020.01.150 ↗
14. Influence of multi-component alloy binder on diamond skeleton formation in PCD10.1016/j.ijrmhm.2025.107329 ↗
15. Role of cobalt of polycrystalline diamond compact (PDC) in drilling process10.1016/j.diamond.2016.03.025 ↗
16. Effect of pressure on sintering behavior of polycrystalline diamond10.1016/j.diamond.2024.111049 ↗
17. Relationship between sintering pressure and leach rate of polycrystalline diamond compacts (PDCs) using central composite design (CCD) modelling10.1016/j.ijrmhm.2024.106854 ↗
18. Manufacturing and characterization of functionally gradient material from cemented carbide to diamond via filament-based material extrusion 3D printing
19. High-impact-resistant polycrystalline diamond compact cutters with double working layers10.1016/j.diamond.2024.111906 ↗
20. Effect of diamond layer thickness on tool wear of polycrystalline diamond composites10.1016/j.diamond.2021.108800 ↗
21. Experimental study on the impact resistance of interface structure to PDC cutting tooth10.1016/j.engfailanal.2022.106503 ↗
22. Tribological behavior of textured polycrystalline diamond compact for thrust bearings using the surface morphology of dung beetles as an inspiration10.1016/j.triboint.2024.109936 ↗
23. Effect of gradient layer thickness on microstructure and properties of gradient polycrystalline diamond compact fabricated via material extrusion 3D printing technology10.1016/j.ijrmhm.2025.107328 ↗
24. Grain size dependence of wear resistance of polycrystalline diamond compact10.1016/j.ceramint.2023.09.064 ↗
25. Effects of initial diamond particle size on the comprehensive mechanical properties of PDC10.1016/j.ceramint.2024.12.476 ↗
26. The mechanism of abnormal grain growth in polycrystalline diamond during high pressure-high temperature sintering10.1016/j.diamond.2003.11.091 ↗
27. Suppression of abnormal grain growth in fine grained polycrystalline diamond materials (PCD)10.1016/j.ijrmhm.2013.02.004 ↗
28. HPHT sintering and performance investigation of PDC with high stacking density by dual particle size diamond formulations10.1016/j.ijrmhm.2024.106802 ↗
29. On the comprehensive performance enhancement of polycrystalline diamond compact by initial diamond particle ratio optimization and cobalt removal treatment10.1016/j.ijrmhm.2025.107226 ↗
30. Law of crushing of diamond powders by ultra-high pressure extrusion10.1016/j.diamond.2019.04.026 ↗
31. Fragmentation behavior of diamond particles with different particle size and ratio under high pressure compaction10.1016/j.ceramint.2024.06.428 ↗
32. Effect of diamond grain roundness on mechanical properties of PDC10.1016/j.ijrmhm.2025.107308 ↗
33. Comparison of conventional knoop and vickers hardness of ceramic materials10.1016/j.jeurceramsoc.2017.02.014 ↗
34. Particle-size effect of carbon powders on the discharge capacity of lithium ion batteries10.1016/S0378-7753(98)00099-8 ↗
35. Implementation of an effective time-saving two-stage methodology for microstructural characterization of cemented carbides10.1016/j.ijrmhm.2015.10.006 ↗
36. Migration mechanisms of multi-principal element alloy binders in polycrystalline diamond compacts10.1016/j.ijrmhm.2025.107564 ↗
37. Electron channeling contrast imaging of twins and dislocations in twinning-induced plasticity steels under controlled diffraction conditions in a scanning electron microscope10.1016/j.scriptamat.2009.06.018 ↗
38. Dislocation density measurement by electron channeling contrast imaging in a scanning electron microscope10.1016/j.scriptamat.2011.11.027 ↗
39. Revealing effect of interfacial bonding on fracture toughness in polycrystalline diamond with medium-entropy alloy binder10.1016/j.jmst.2024.11.047 ↗
40. Structural transition and migration of incoherent twin boundary in diamond10.1038/s41586-023-06908-6 ↗
41. Ordered structures in random grain boundaries; some geometrical probabilities10.1016/0001-6160(75)90100-5 ↗
42. Grain boundary dislocations: burgers vectors and arrangement in cubic metals10.1080/14786437308220978 ↗
43. Sintering window and sintering mechanism for diamond10.1016/j.ijrmhm.2023.106401 ↗
44. A model for liquid phase sintering10.1016/1359-6454(95)00440-8 ↗
45. Influence of surface roughness on the wetting angle10.1557/JMR.1995.1984 ↗
46. Is hardness constant in covalent materials?10.1016/j.jmst.2021.10.032 ↗
47. Ultrastrong catalyst-free polycrystalline diamond10.1038/s41598-020-79167-4 ↗
48. Elastic deformation and the contact of surfaces10.1038/172918a0 ↗
49. Wear of aluminium and Al-Si alloys in single-pass sliding against glass10.1016/0043-1648(89)90046-X ↗
50. A review on abrasive wear of aluminum composites: mechanisms and influencing factors, journal of composites
51. Hierarchically structured diamond composite with exceptional toughness10.1038/s41586-020-2361-2 ↗
52. Intersectional nanotwinned diamond-the hardest polycrystalline diamond by design10.1038/s41524-020-00387-3 ↗