A systematic investigation on the diamond wear mechanism during the dry scratching of WC/Co
Source abstract
Abstract
Abstract In the present work, the diamond wear mechanism during the scratching test is studied by Raman spectroscopy, backscattering electron scanning microscope (BSEM), energy dispersive X-ray spectroscopy (EDS) and X ray photoelectron spectroscopy (XPS). As the impact pressure reached the fracture strength of the diamond, surface chipping of the diamond grits occurred as the dominated diamond wear mechanism, which resulted in the formation of scattered micro diamond flakes on WC/Co surface. The transformation of diamond to graphite and oxidation of graphite are identified at the chip formation stage during the diamond scratching of WC/Co. In addition, the formation of tetrahedrally bonded amorphous carbon phase is proposed as new wear mechanisms under the dynamic loads.
Source: openaire · Quality: candidate unverified · Source record ↗
References (39)
Show source-provided references
1. Study on tool wear characteristics in diamond turning of reaction-bonded silicon carbide10.1007/s00170-011-3289-3 ↗
2. Graphitization and amorphization of textured carbon using high-energy nanosecond laser pulses10.1016/j.carbon.2016.04.026 ↗
3. Materials: transformation of diamond to graphite10.1038/44323 ↗
4. Cutting performance of nano-crystalline diamond (NCD) coating in micro-milling of Ti6Al4V alloy10.1016/j.precisioneng.2016.01.009 ↗
5. Wear mechanism of diamond tools against single crystal silicon in single point diamond turning process10.1016/j.triboint.2012.06.027 ↗
6. Ultra-precision machining of Fresnel microstructure on die steel using single crystal diamond tool10.1016/j.jmatprotec.2011.07.018 ↗
7. Graphitization as a precursor to wear of diamond in machining pure iron: a molecular dynamics investigation10.1016/j.commatsci.2008.10.007 ↗
8. Novel tool wear monitoring method in ultra-precision raster milling using cutting chips10.1016/j.precisioneng.2014.02.004 ↗
9. Impact fatigue fracture of polycrystalline diamond compact (PDC) cutters and the effect of microstructure10.1016/j.ijrmhm.2014.06.003 ↗
10. Effect of loading rate on the fracture toughness and failure mechanisms of polycrystalline diamond (PCD)10.1016/j.ijrmhm.2016.06.011 ↗
11. XPS analysis of the groove wearing marks on flank face of diamond tool in nanometric cutting of silicon wafer10.1016/j.ijmachtools.2008.06.008 ↗
12. Chemical aspects of tool wear in single point diamond turning10.1016/0141-6359(95)00019-4 ↗
13. The wear of polycrystalline diamond tools used in the cutting of metal matrix composites10.1016/S0263-4368(98)00040-7 ↗
14. The application of polycrystalline diamond (PCD) tool materials when drilling and reaming aluminium based alloys including MMC10.1016/0890-6955(95)93044-7 ↗
15. New perspectives in hardmetal abrasion simulation10.1016/j.wear.2017.01.038 ↗
16. The mystery of the 1140cm−1 Raman line in nanocrystalline diamond films10.1016/j.carbon.2003.12.045 ↗
17. Origin of the fine structure of the Raman D band in single-wall carbon nanotubes10.1103/PhysRevLett.90.157401 ↗
18. Raman spectroscopy of amorphous, nanostructured, diamond-like carbon, and nanodiamond10.1098/rsta.2004.1452 ↗
19. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
20. Resonance effects in Raman scattering from polycrystalline diamond films10.1063/1.105340 ↗
21. The properties and applications of nanodiamonds10.1038/nnano.2011.209 ↗
22. Raman spectroscopy on amorphous carbon films10.1063/1.362745 ↗
23. Characterization of diamond films by Raman spectroscopy10.1557/JMR.1989.0385 ↗
24. Binder extrusion in sliding wear of WC-Co alloys10.1016/0043-1648(85)90071-7 ↗
25. Rotating wheel abrasion of WC/Co hardmetals10.1016/j.wear.2004.09.028 ↗
26. In situ scratch testing and abrasion simulation of WC/Co10.1016/j.ijrmhm.2016.06.004 ↗
27. Simulation of abrasion to WC/Co hardmetals using a micro-tribology test system10.1016/j.wear.2012.11.057 ↗
28. Use of FIB/SEM to assess the tribo-corrosion of WC/Co hardmetals in model single point abrasion experiments10.1016/j.triboint.2012.11.008 ↗
29. Model single point abrasion experiments on WC/Co hardmetals10.1016/j.ijrmhm.2010.04.009 ↗
30. Anisotropic mechanical amorphization drives wear in diamond10.1038/nmat2902 ↗
31. Micro fracture behavior of cutting edges in grinding using single crystal cBN grains10.1016/j.diamond.2008.03.008 ↗
32. Conditioning and monitoring of grinding wheels10.1016/j.cirp.2011.05.003 ↗
33. Optical modes of trans-polyacetylene10.1063/1.441151 ↗
34. Analysis of the structure of multi-component carbon films by resonant Raman scattering10.1063/1.357476 ↗
35. Bonding in amorphous carbon nitride10.1016/j.diamond.2003.11.008 ↗
36. Nanosized beta carbon nitride crystal through mechanochemical reaction10.1016/S0009-2614(02)02044-4 ↗
37. Nitrogen doping of tetrahedral amorphous carbon10.1016/0925-9635(94)05265-4 ↗
38. New insights into the structure and reduction of graphite oxide10.1038/nchem.281 ↗
39. Hydrazine-reduction of graphite- and graphene oxide10.1016/j.carbon.2011.02.071 ↗