journal article·2018-09

Synergistic effects of graphite nano-flakes and submicron SiC particles on the characteristics of spark plasma sintered ZrB2 nanocomposites

Soroush Parvizi, Zohre Ahmadi, Mehran Jaberi Zamharir, Mehdi Shahedi Asl

Publisher page

Abstract

Abstract ZrB2 ceramic (Z), ZrB2–25 vol% SiC composite (ZS) and ZrB2–25 vol% SiC composite doped with 5 wt% graphite (ZSG) were fabricated by spark plasma sintering process. The sintered samples were compared to investigate the effects of submicron SiC particles and graphite nano-flakes on sinterability, microstructure and mechanical properties of ZrB2-based ceramic matrix composites. Spark plasma sintering at 1900 °C for 7 min under 40 MPa resulted in fully dense ZS and ZSG samples but a relative density of 96.1% was achieved for Z sample. The growth of ZrB2 grains was effectively decelerated by addition of submicron SiC particles and graphite nano-flakes. Hardness values of 13.1, 19.5 and 16.6 GPa were measured for Z, ZS and ZSG samples, respectively, which verify the hardening effect of SiC and softening effect of graphite in ZrB2-based composites. By the simultaneous addition of SiC and graphite into ZrB2 matrix, the indentation fracture toughness of ZSG sample reached 6.7 MPa m½, meaningfully higher than those of Z and ZS samples with toughness values of 3.2 and 4.3 MPa m½, respectively. Such an improvement in the fracture toughness of ZSG nanocomposite was attributed to the presence of graphite nano-flakes as well as the in-situ formed ZrC and B4C nano-particles. Flexural strength of Z, ZS and ZSG samples reached 445, 624 and 631 MPa, respectively. Although SiC had a remarkable strengthening effect in the ZrB2-based ceramic, the addition of graphite together with SiC had not a significant impact on the flexural strength of composite material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Effects of carbon additives on the properties of ZrB2–based composites: a review10.1016/j.ceramint.2018.01.214 ↗
2. Fast densification of ultra-high-temperature ceramics by spark plasma sintering10.1111/j.1744-7402.2006.02060.x ↗
3. Refractory diborides of zirconium and hafnium10.1111/j.1551-2916.2007.01583.x ↗
4. Significance of hot pressing parameters and reinforcement size on densification behavior of ZrB2–25 vol% SiC UHTCs10.1016/j.ceramint.2015.01.082 ↗
5. Significance of hot pressing parameters on the microstructure and densification behavior of zirconium diboride10.1016/j.ijrmhm.2015.01.004 ↗
6. Self-propagating high-temperature synthesis of Ti3AlC2 MAX phase from mechanically-activated Ti/Al/graphite powder mixture10.1016/j.ceramint.2018.02.195 ↗
7. Hardness and toughness of hot pressed ZrB2–SiC composites consolidated under relatively low pressure
8. A fractographical approach to the sintering process in porous ZrB2–B4C binary composites10.1016/j.ceramint.2014.08.081 ↗
9. Microwave sintering of aluminum-ZrB2 composite: focusing on microstructure and mechanical properties10.1590/1980-5373-MR-2015-0799 ↗
10. Thermodynamic analysis of ZrB2–SiC oxidation: formation of a SiC-depleted region10.1111/j.1551-2916.2006.01329.x ↗
11. A Taguchi approach to the influence of hot pressing parameters and SiC content on the sinterability of ZrB2-based composites10.1016/j.ijrmhm.2015.03.002 ↗
12. Influence of silicon carbide addition on the microstructural development of hot pressed zirconium and titanium diborides10.1016/j.ceramint.2015.12.072 ↗
13. Evaluation of microstructure and mechanical properties of Al-TaC composites prepared by spark plasma sintering process10.1016/j.jallcom.2017.02.144 ↗
14. A processing–microstructure correlation in ZrB2–SiC composites hot-pressed under a load of 10 MPa10.13189/ujms.2015.030103 ↗
15. Temperature dependence of microstructure evolution during hot pressing of ZrB2-30 vol% SiC composites10.1016/j.ijrmhm.2015.06.017 ↗
16. Influence of nano-SiC participation on densification and mechanical properties of ZrB2
17. Effect of hot pressing time and temperature on the microstructure and mechanical properties of ZrB2–SiC10.1007/s10853-006-1274-2 ↗
18. Fractographical assessment of densification mechanisms in hot pressed ZrB2–SiC composites10.1016/j.ceramint.2014.07.023 ↗
19. Microstructural feature and thermal shock behavior of hot-pressed ZrB2–SiC–ZrO2 composite10.1016/j.matchemphys.2009.03.033 ↗
20. Reactive hot pressing of ZrB2–SiC composites10.1111/j.1151-2916.2000.tb01558.x ↗
21. Boron carbide and nitride as reactants for in situ synthesis of boride-containing ceramic composites10.1016/S0955-2219(03)00607-1 ↗
22. Reactive hot pressing of ZrB2-based composites with changes in ZrO2/SiC ratio and sintering conditions. Part I: densification behavior10.1016/j.ceramint.2015.03.033 ↗
23. Reactive hot pressing of ZrB2-based composites with changes in ZrO2/SiC ratio and sintering conditions. Part II: mechanical behavior10.1016/j.ceramint.2015.10.166 ↗
24. Boron carbide–zirconium boride in situ composites by the reactive pressureless sintering of boron carbide–zirconia mixtures10.1111/j.1151-2916.2001.tb00714.x ↗
25. Pressureless sintering of ZrB2–SiC ceramics10.1111/j.1551-2916.2007.02006.x ↗
26. Pressureless sintering of zirconium diboride10.1111/j.1551-2916.2005.00739.x ↗
27. Properties of ZrB2–SiC ceramics by pressureless sintering10.1111/j.1551-2916.2009.03039.x ↗
28. Effect of Al and Mo addition on phase formation, mechanical and microstructure properties of spark plasma sintered iron alloy10.1016/j.mtcomm.2017.10.005 ↗
29. Low temperature sintering of aluminum-zircon metal matrix composite prepared by spark plasma sintering10.1590/1980-5373-MR-2016-0395 ↗
30. Effect of TiB2 content on the characteristics of spark plasma sintered Ti–TiBw composites10.1016/j.apt.2017.03.028 ↗
31. Fundamental investigations on the spark plasma sintering/synthesis process. I. Effect of dc pulsing on reactivity10.1016/j.msea.2004.11.020 ↗
32. Taguchi analysis on the effect of process parameters on densification during spark plasma sintering of HfB2-20 SiC10.1016/j.ijrmhm.2011.11.001 ↗
33. Spark plasma sintering of WC-based cermets/titanium and vanadium added composites: a comparative study on the microstructure and mechanical properties
34. Bending strength and microstructure of Al2O3 ceramics densified by spark plasma sintering10.1016/S0955-2219(00)00086-8 ↗
35. Spark plasma sintering of zirconium diborides10.1111/j.1551-2916.2008.02587.x ↗
36. Comparison of ZrB2–ZrC–SiC composites fabricated by spark plasma sintering and hot pressing10.1002/adem.200400184 ↗
37. Preparation and characterization of high-toughness ZrB2/Mo composites by hot-pressing process10.1016/j.ijrmhm.2009.06.003 ↗
38. Pressureless sintering of carbon-coated zirconium diboride powders10.1016/j.msea.2007.02.116 ↗
39. Effect of carbon nanotubes on the properties of ZrB2–SiC ceramics10.1016/j.msea.2007.11.027 ↗
40. Spark plasma sintering of silicon carbide and multi-walled carbon nanotube reinforced zirconium diboride ceramic composite10.1016/j.msea.2012.05.020 ↗
41. Effects of nano-graphite content on the characteristics of spark plasma sintered ZrB2–SiC composites10.1016/j.msea.2018.01.038 ↗
42. A statistical approach towards processing optimization of ZrB2–SiC–graphite nanocomposites. Part I: relative density10.1016/j.ceramint.2018.01.122 ↗
43. Fabrication, mechanical properties and thermal shock resistance of a ZrB2-graphite ceramic10.1016/j.ijrmhm.2010.12.014 ↗
44. Effect of graphite flake on microstructure as well as mechanical properties and thermal shock resistance of ZrB2–SiC10.1016/j.jallcom.2009.04.109 ↗
45. Effect of graphite flake on the mechanical properties of hot pressed ZrB2–SiC ceramics10.1016/j.matlet.2008.07.027 ↗
46. Effect of graphite flake orientation on microstructure and mechanical properties of ZrB2–SiC–graphite composite10.1016/j.jallcom.2009.05.126 ↗
47. Microstructure and thermal shock behavior of ZrB2–SiC–graphite composite10.1016/j.matchemphys.2008.07.095 ↗
48. Pressureless densification of zirconium diboride with boron carbide additions carbide additions10.1111/j.1551-2916.2006.00949.x ↗
49. Synergetic effects of SiC and Csf in ZrB2-based ceramic composites. Part I: densification behavior10.1016/j.ceramint.2015.11.139 ↗
50. Characterization of hot-pressed graphene reinforced ZrB2–SiC composite10.1016/j.msea.2014.12.028 ↗
51. Synergetic effects of SiC and Csf in ZrB2-based ceramic composites. Part II: grain growth10.1016/j.ceramint.2016.08.205 ↗
52. Characteristics of multi-walled carbon nanotube toughened ZrB2–SiC ceramic composite prepared by hot pressing10.1016/j.ceramint.2015.09.165 ↗
53. Interfacial phenomena and formation of nano-particles in porous ZrB2–40 vol% B4C UHTC10.1016/j.ceramint.2016.07.208 ↗
54. The morphology-dependent properties for nano-carbon-reinforced ZrB2–SiC composites
55. Densification, microstructure and mechanical properties of hot pressed ZrB2–SiC ceramic doped with nano-sized carbon black10.1016/j.ceramint.2017.03.188 ↗
56. Fractographical characterization of hot pressed and pressureless sintered AlN-doped ZrB2–SiC composites10.1016/j.matchar.2015.10.016 ↗
57. Fractographical characterization of hot pressed and pressureless sintered SiAlON-doped ZrB2–SiC composites10.1016/j.matchar.2015.03.002 ↗
58. Effect of nano-AlN on densification behavior of hot-pressed ZrB2-based ceramics
59. Sintering behavior of ZrB2–SiC composites doped with Si3N4: a fractographical approach10.1016/j.ceramint.2017.04.144 ↗
60. A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements10.1111/j.1151-2916.1981.tb10320.x ↗
61. Elasticity and damping of porous materials and impregnated materials10.1111/j.1151-2916.1984.tb09622.x ↗
62. Influence of graphite nano-flakes on densification and mechanical properties of hot-pressed ZrB2–SiC composite10.1016/j.ceramint.2015.01.014 ↗
63. Effects of graphite flake diameter on mechanical properties and thermal shock behavior of ZrB2–nanoSiC–graphite ceramics10.1016/j.ijrmhm.2013.02.015 ↗
64. Taguchi analysis on the effect of hot pressing parameters on density and hardness of zirconium diboride10.1016/j.ijrmhm.2014.09.006 ↗
65. Microstructure, hardness and fracture toughness of spark plasma sintered ZrB2–SiC–Cf composites10.1016/j.ceramint.2017.08.030 ↗
66. Effects of sintering temperature on microstructure and mechanical properties of spark plasma sintered titanium10.1016/j.matchemphys.2017.09.069 ↗
67. Contribution of SiC particle size and spark plasma sintering conditions on grain growth and hardness of TiB2 composites10.1016/j.ceramint.2017.07.121 ↗
68. Optimization of effective parameters on thermal shock resistance of ZrB2-SiC-based composites prepared by SPS: using Taguchi design10.1016/j.matchemphys.2017.04.062 ↗
69. Effect of different additives and open porosity on fracture toughness of ZrB2–SiC-based composites prepared by SPS10.1016/j.ceramint.2016.11.005 ↗
70. Significance of hot pressing parameters and reinforcement size on sinterability and mechanical properties of ZrB2–25 vol% SiC UHTCs10.1016/j.ceramint.2015.04.027 ↗
71. Characterization of hot pressed SiC whisker reinforced TiB2 based composites10.1016/j.ijrmhm.2016.08.004 ↗
72. Microstructural development and mechanical properties of hot pressed SiC reinforced TiB2 based composite10.1016/j.ijrmhm.2015.03.014 ↗