Effects of chromium and carbon content on microstructure and properties of TiC-steel composites
Source abstract
Abstract
Abstract The composite of low alloy steel reinforced with TiC particles (36 wt%) was prepared by the powder metallurgy (PM) process in this paper. The effects of the chromium content and the total carbon content on the composites were studied. The scanning electron microscopy (SEM) was used to observe the microstructure and such properties as porosity, hardness, transverse rupture strength (TRS) and fracture morphology of the samples were tested. The results show that the optimum sintering temperature decreases with the increase of chromium content. The porosity of sintered samples decreases with increasing the total carbon content, and increases with increasing the chromium content. The TRS and hardness of samples increase with the increase of the carbon content. With the increase of the chromium content, the TRS of the sample gradually decreases, and the hardness firstly increases and then decreases a little. This results from the combined effects of the martensite amount and the shape, size and composition of precipitated chromium carbides in the steel matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. The history of the technology process of hardmetals10.1016/j.ijrmhm.2013.07.014 ↗
2. Review on TiC reinforced steel composites10.1023/A:1017947206490 ↗
3. Microstructure and mechanical properties of steel/TiC nano-composite surface layer produced by friction stir processing10.1016/j.surfcoat.2012.08.005 ↗
4. Microstructure evolution and wear properties of in situ synthesized TiB2 and TiC reinforced steel matrix composites10.1016/j.jallcom.2007.05.018 ↗
5. Effect of sintering process on the microstructures and properties of in situ TiB2-TiC reinforced steel matrix composites produced by spark plasma sintering10.1016/j.jmatprotec.2009.08.008 ↗
6. Rapid fabrication of in situ TiC particulates reinforced Fe-based composites by spark plasma sintering10.1016/j.matlet.2009.06.026 ↗
7. In-situ formation of novel TiC-particle-reinforced 316L stainless steel bulk-form composites by selective laser melting10.1016/j.jallcom.2017.01.149 ↗
8. Fabrication of in situ TiC locally reinforced manganese steel matrix composite via combustion synthesis during casting10.1016/j.matdes.2012.07.063 ↗
9. The abrasive wear resistance of TiC and (Ti,W)C-reinforced Fe-17Mn austenitic steel matrix composites10.1016/j.triboint.2009.12.057 ↗
10. Effect of chromium content on intergranular corrosion and precipitation of Ti-stabilized ferritic stainless steels10.1016/j.corsci.2010.01.037 ↗
11. Characterization of TiN, TiC and Ti(C,N) in titanium-alloyed ferritic chromium steels focusing on the significance of different particle morphologies10.1016/j.matchar.2014.12.014 ↗
12. Effect of Cr on the passive film formation mechanism of steel rebar in saturated calcium hydroxide solution10.1016/j.apsusc.2016.08.074 ↗
13. Wear mechanisms of several cutting tool materials in hard turning of high carbon-chromium tool steel10.1016/j.triboint.2013.10.011 ↗
14. Effects of chromium addition on microstructure and properties of TiC-VC reinforced Fe-based laser cladding coatings10.1016/j.jallcom.2014.06.073 ↗
15. Microstructures and properties of low-chromium high corrosion-resistant TiC-VC reinforced Fe-based laser cladding layer10.1016/j.jallcom.2014.10.012 ↗
16. Hot friction and wear behaviour of high speed steel and high chromium iron for rolls10.1016/j.wear.2009.01.049 ↗
17. Chemical composition, microstructure and sintering temperature modifications on mechanical properties of TiC-based cermet-a review10.1016/j.matdes.2014.10.081 ↗
18. The effects of metal binder content and carbide grain size on the aqueous corrosion behaviour of TiC-316L stainless steel cermets10.1016/j.ijrmhm.2014.02.002 ↗
19. Effect of C particle size on the porous formation of TiC particulate locally reinforced steel matrix composites via the SHS reaction of Ni-Ti-C system during casting10.1016/j.msea.2007.04.061 ↗
20. Effect of form of carbon on the microstructure of in situ synthesized TiC-reinforced iron-based composite10.1016/j.matlet.2003.11.034 ↗
21. Effect of carbon content and cooling mode on the microstructure and properties of Ti(C,N)-based cermets10.1016/j.ijrmhm.2009.07.018 ↗
22. Fracture in ceramic-reinforced metal matrix composites based on high-speed steel10.1023/A:1004303609990 ↗
23. Microstructure and properties of TiC-high manganese steel cermet prepared by different sintering processes10.1016/j.jallcom.2015.08.047 ↗
24. Microstructural development and sintering kinetics in ceramic reinforced high speed steel metal matrix composites10.1179/pom.1997.40.2.143 ↗
25. Structure and microstructure evolution of a ternary Fe–Cr–Ni alloy akin to super martensitic stainless steel10.1016/j.matdes.2013.03.035 ↗
26. The precipitation and transformation of secondary carbides in a high chromium cast iron10.1016/j.matchar.2005.10.002 ↗
27. Effect of carbon content on the microstructure and mechanical properties of superfine Ti(C,N)-based cermets10.1016/j.matchar.2008.01.006 ↗
28. Effect of carbon content on the microstructure and mechanical properties of (Ti, W, Ta, Mo)(C, N)-(Co, Ni) cermets10.1016/S0263-4368(98)00074-2 ↗
29. Effect of Cr on the microstructure and properties of TiC-TiB2 particles reinforced Fe-based composite coatings10.1016/j.surfcoat.2017.03.026 ↗
30. Website: http://www.ferro-tic.com/grade.html
31. The effect of microstructure on fracture mechanisms of 2.25CrlMo low alloy steel, part A: the influence of non-metallic inclusions10.1016/0308-0161(94)00000-X ↗
32. The effect of microstructure on fracture mechanisms of 2.25CrlMo low alloy steel, part B: the influence of carbides10.1016/0308-0161(95)00057-7 ↗