Synthesis of tungsten sub-carbide W2C from graphite/tungsten powder mixtures by eruptive heating in a solar furnace
Source abstract
Abstract
Abstract Synthesis of single-phase tungsten sub-carbide phase W 2 C was attempted in inert Ar gas atmosphere started from compacted powder mixtures of graphite (G) and tungsten (W) with controlled mole ratios between 0.35 and 0.50 under solar radiation heating for 30 min at two target temperatures T , 1600 °C and 1900 °C, followed by initial eruptive heating from the ambient temperature to the target temperature. Under most of the examined conditions excluding the G/W = 0.50 specimens at both T = 1600 °C and 1900 °C, there was discernible proportion of non-reacted metallic W co-existed with the formed W 2 C. For the reference test specimen possessing the G/W mole ratio exactly at 1.0, W 2 C phase emerged as the trace second phase co-exiting with the principal mono-carbide phase WC. Vickers microhardness Hv was measured using a load of 25 g to be 2785 ± 335 and 2645 ± 210, respectively, for the WC phase in the G/W = 1.0 specimen and for the W 2 C phase in the G/W = 0.50 specimen processed at T = 1900 °C. Discrete growth of nano-meter scale WC whiskers over the top surface of the specimens heated to 1900 °C was detected by scanning electron microscope inspection.
Source: openaire · Quality: candidate unverified · Source record ↗
References (14)
Show source-provided references
1. High meta-stability of tungsten sub-carbide W2C formed from tungsten/carbon powder mixture during eruptive heating in a solar furnace10.1016/j.ijrmhm.2006.03.001 ↗
2. Martínez D, Rodríguez J, Guerra Rosa L, Cruz Fernandes J, Shohoji N. Influence of gas environment on synthesis of silicon carbide and some carbides and carbonitrides of d-group transition metals through reaction between metal powders and amorphous carbon powders in a solar furnace at P.S.A. (Plataforma Solar de Almería). J de Phys IV (Symp Ser) 1999; 9 (Proceedings 3); 405–10.10.1051/jp4:1999363 ↗
3. Catalytic acceleration of graphitisation of amorphous carbon during synthesis of tungsten carbide from tungsten and excess amorphous carbon in a solar furnace10.1016/S0254-0584(98)00275-2 ↗
4. Catalytic graphitisation of amorphous carbon during solar carbide synthesis of VIa-group metals (Cr, Mo and W)10.2320/matertrans1989.41.246 ↗
5. Photochemical effects in carbide synthesis of d-group transition metals (Ti, Zr, V; Nb, Ta; Cr, Mo, W) in a solar furnace at PSA (Plataforma Solar de Almería)10.1115/1.1350565 ↗
6. Storms · 1967
7. Cruz Fernandes J, Almeida Costa Oliveira F, Granier B, Badie JM, Guerra Rosa L, Shohoji N. Kinetic aspects of reaction between tantalum and carbon material (active carbon or graphite) under solar radiation heating. Solar Energy 2007;81, in press.10.1016/j.solener.2006.01.001 ↗
8. Shohoji N, Badie JM, Granier B, Almeida Costa Oliveira F, Cruz Fernandes J, Guerra Rosa L. Formation of hexagonal η-MoC1−x phase at a temperature lower than 1660°C by a solar radiation heating under presence of excess free carbon. Int J Refractory Met Hard Mater 2007;25, in press.10.1016/j.ijrmhm.2006.05.004 ↗
9. Carbide formation of Va-group metals (V, Nb and Ta) in a solar furnace10.1016/S0263-4368(00)00014-7 ↗
10. Studies on the formation process of tungsten carbide powder from tungsten powder
11. Characterisation of solar-synthesized TiCx (x=0.50, 0.625, 0.75, 0.85, 0.90 and 1.0) by X-ray diffraction, density and Vickers microhardness10.1016/S0254-0584(02)00131-1 ↗
12. Solar-induced fluorescence (SIF) of C2 radical10.1016/S0009-2614(02)00445-1 ↗
13. Köster U, Hillenbrand HG. Mechanical properties of amorphous alloys. In: Proc Conf on Metallic Glasses: Science and Technology, Budapest, 1980, vol. I, pp. 71–83.
14. The connection between the electronic structure and the properties of binderless tungsten carbides10.1016/S0263-4368(03)00012-X ↗