journal article·2024-11

Environment-friendly process to net-shape tungsten carbide-cobalt components of precise and complex geometry

Poly Rose, Jeevan Kumar Pallagani, Seshu Bai Vummethala, Rajasekharan Thankappan Pillai

Publisher page

Abstract

Complex shapes of tungsten carbide with 10 wt% cobalt content were fabricated using a water-based gelcasting process combined with rapid prototyping (RPGC process). A free-flowing slurry of the powder is allowed to solidify inside the moulds printed from the fused filament fabrication technique. Two types of gelling systems, one based on acrylamide and another non-toxic, called Isobam, were used for shape forming. Viscosity studies of slurries were carried out to optimize the binder content for free-flowing slurry with maximum loading of the powder. The mechanical properties such as hardness measured using micro indentation, flexural strength from the 3-point bent test and fracture toughness from pb-notch method are determined on the sintered samples. The density and microstructure of samples sintered at 1500, 1550 and 1600°C are analysed. The effect of grain growth inhibitors such as Vanadium carbide and Chromium carbide with 0.5 and 1 wt% additions was investigated. With the addition of 1 wt% of VC, the hardness has increased by 28% from 12.8 to 16.4 GPa, and the flexural strength by 58% from 1071 to 1695 MPa. with an improvement of 58%. Fabrication of a cylindrical cup has been demonstrated from the optimized composition of WC/Co with 1 wt% VC, suitable for ball-mill insert application.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Physical and chemical nature of cemented carbides10.1179/095066079790136363 ↗
2. Effect of cobalt content on the microstructure and mechanical properties of coarse-grained WC-co cemented carbides fabricated from chemically coated composite powder10.1016/j.jallcom.2018.06.366 ↗
3. Materials science of cemented carbides — an overview10.1016/S0261-3069(01)00007-3 ↗
4. A new view of the deterioration and wear of WC/co cemented carbide rock drill buttons10.1016/j.wear.2007.01.030 ↗
5. Gühring’s ‘elite’ hard metals plant10.1016/0026-0657(91)91195-C ↗
6. The processing of hard metal components by powder injection moulding10.1016/0263-4368(93)90017-A ↗
7. Leading Europe in extruded carbide10.1016/S0026-0657(02)80024-8 ↗
8. Gelcasting of WC–8wt%co tungsten cemented carbide10.1016/j.ijrmhm.2007.11.003 ↗
9. Sintering of WC-12%co processed by binder jet 3D printing (BJ3DP) technology10.1016/j.ijrmhm.2017.10.023 ↗
10. A comprehensive review of process planning and trajectory optimization in arc-based directed energy deposition10.1016/j.jmapro.2024.03.093 ↗
11. Complex-shaped alumina products through rapid prototyping
12. Development of low-toxicity gelcasting systems10.1111/j.1151-2916.1998.tb02377.x ↗
13. Fabrication of Ba0.5Sr0.5TiO3 components combining rapid prototyping with gelcasting using different gelling systems
14. Room-temperature gelcasting of alumina with a water-soluble copolymer10.1557/jmr.2013.132 ↗
15. Properties of porous magnesia-stabilized zirconia ceramics fabricated by slurry infiltration into polyurethane foam10.1111/ijac.14831 ↗
16. Dispersion and gelation behaviour of alumina suspensions with Isobam10.1016/j.ceramint.2018.03.185 ↗
17. Gelcasting of transparent YAG ceramics by a new gelling system10.1016/j.ceramint.2014.04.125 ↗
18. A Novel Preparation of Special-Shaped Phosphors-in-Glass by Gel Casting with Isobam for High-Power WLEDs Lighting10.3390/ma15134667 ↗
19. Effect of pH, milling time, and Isobam content on porous silicon nitride ceramics prepared by gel casting
20. Preparation of SiC porous ceramics by a novel gelcasting method assisted with surface modification10.1016/j.ceramint.2020.03.155 ↗
21. Cast WC-co alloy-based tool manufacturing using a polymeric mold prepared via digital light processing 3D printing10.1016/j.matlet.2021.130979 ↗
22. Gelcasting of zirconia-based all-ceramic teeth combined with stereolithography10.1016/j.ceramint.2018.08.219 ↗
23. Fabrication of soft devices with buried fluid channels by using sacrificial 3D printed molds
24. Regulation of the Interface compatibility of the 3D-printing interpenetration networks toward reduced structure anisotropy and enhanced performances10.1021/acsami.3c06514 ↗
25. Net-shaping of advanced ceramic composites by gelcasting into precision molds made by rapid-prototyping
26. On hardness and toughness of ultrafine and nanocrystalline hard materials10.1016/S0263-4368(99)00003-7 ↗
27. Cemented carbide microstructures: a review10.1016/j.ijrmhm.2018.12.004 ↗
28. Kurlov · 2013 · 184
29. Effects of VC/Cr3C2 on WC grain morphologies and mechanical properties of WC-6wt.%co cemented carbides10.1016/j.jallcom.2017.04.187 ↗
30. Effect of VC and NbC additions on microstructure and properties of ultrafine WC-10Co cemented carbides10.1016/S1003-6326(09)60063-7 ↗
31. Mechanism of void healing in cold-rolled aeroengine M50 bearing steel under electroshocking treatment: a combined experimental and simulation study10.1016/j.matchar.2022.111736 ↗
32. Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature. Available from: https://doi.org/10.1520/C1421-10.10.1520/C1421-10 ↗
33. Aqueous gelcasting of silica ceramics using DMAA10.1016/j.ceramint.2013.06.048 ↗
34. Material extrusion-based three-dimensional printing of WC–co alloy with a paste prepared by powder coating
35. Fabrication and mechanical properties of ultrafine-grained WC–10Co–0.45Cr3C2–0.25VC alloys10.1016/j.ijrmhm.2010.11.004 ↗
36. Effect of ultrafine WC contents on the microstructures, mechanical properties and wear resistances of regenerated coarse-grained WC-10Co cemented carbides10.1016/j.ijrmhm.2021.105516 ↗