journal article·2018-11

The effect of FexNby (x = 2,7 and y = 1,6) intermetallics on microstructure and mechanical properties of electron beam welded Nb-1Zr refractory alloy

Ali Hajitabar, Homam Naffakh-Moosavy

Publisher page

Abstract

Abstract In this study, weldability and mechanical properties of dissimilar joint between Nb-1Zr and 321 stainless steel produced by electron beam welding were investigated. The results indicated that the optimum parameters to make this dissimilar joint possible are the electron beam offset of 50–50 and the current of 13 mA. Because of high melting temperature of Nb relative to 321 stainless steel and also high thermal conductivity of Nb, the molten weld pool was drawn to 321 stainless steel side containing 85.1%Vol 321 stainless steel and 14.9%Vol Nb. Non uniform regions were observed in the weld zone which were due to melt turbulence and its rapid solidification. The Fe7Nb6 and Fe2Nb intermetallic compounds formed in various regions of the weld zone directly govern the mechanical properties and weldability of the weld. Tensile strength of the weld was 170 MPa which was equal to 60.5% of that in autogenous weld of Nb-1Zr alloy. Tensile strength of the autogenous weld of Nb-1Zr alloy was 281 MPa. According to the Rosenthal's equations and measurements of the weld section, the recrystallization temperature of the Nb-1Zr was identified 1810 °C in the EBW condition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. The high-temperature oxidation characteristics of alloys from the Nb-W-Cr system with C additions10.1007/s11837-008-0093-0 ↗
2. Improvement in the oxidation resistance of Nb–Ti–Si–Cr–Al–Hf alloys containing alloyed Ge and B10.1016/j.corsci.2014.08.006 ↗
3. High-temperature oxidation behavior of Nb–Si–Cr alloys with Hf additions10.1016/j.jallcom.2011.02.174 ↗
4. Microstructure and oxidation behavior of Nb-based multi-phase alloys10.1016/j.matdes.2012.09.046 ↗
5. Elements of metallurgy and engineering alloys
6. Niobium as mint metal: production–properties–processing10.1016/j.ijrmhm.2005.10.008 ↗
7. An investigation on microstructures and mechanical properties of explosive cladded C103 niobium alloy over C263 nimonic alloy10.1016/j.jmatprotec.2014.04.025 ↗
8. Cardarelli · 2008
9. Dissimilar pulsed Nd: YAG laser welding of pure niobium to Ti–6Al–4V10.1016/j.matdes.2013.07.094 ↗
10. Materials selection for corrosion control
11. Weld integrity and performance: a source book adapted from ASM international handbooks, conference proceedings, and technical books
12. Alloy phase diagrams
13. Influence of multi-beam preheating temperature and stress on the buckling distortion in electron beam welding10.1016/j.matdes.2017.11.016 ↗
14. Study on strengthening mechanism of Ti/Cu electron beam welding10.1016/j.matdes.2017.02.054 ↗
15. Research on modeling of heat source for electron beam welding fusion-solidification zone10.1016/j.cja.2012.12.023 ↗
16. Fermilab · 2018
17. Study of microstructure, mechanical properties and residual stresses in full penetration electron beam welded Ti-5Al-2.5 Sn alloy sheet10.1016/j.matdes.2017.11.009 ↗
18. Effect of beam offset on the characteristics of copper/304stainless steel electron beam welding10.1016/j.vacuum.2016.03.034 ↗
19. Electron beam welding–Techniques and trends–Review10.1016/j.vacuum.2016.05.004 ↗
20. A physico–mathematical model of the formation of intermetallic compounds in weldbrazing of refractory metals to steel10.1080/09507116.2011.566736 ↗
21. Interfacial structure and mechanical properties of hot-roll bonded joints between titanium alloy and stainless steel using niobium interlayer10.1016/S1003-6326(14)63416-6 ↗
22. A new vacuum brazing route for niobium-316L stainless steel transition joints for superconducting RF cavities10.1007/s11665-014-1312-1 ↗
23. Effect of thermal compensation on microstructure and mechanical properties of electron-beam welded joint for high-Nb containing TiAl/Ti600 alloys10.1016/j.matdes.2017.05.092 ↗
24. Laser welding of niobium to 410 steel with a nickel interlayer produced by electro spark deposition10.1016/j.matdes.2016.06.022 ↗
25. Saito · 2001
26. Brazing refractory metals used in high-temperature nuclear instrumentation
27. First samples of Ti and Nb tubes explosion welding joint with stainless steel for ILC 1.8 K cryomodule10.1134/S1063779613040059 ↗
28. Effect of beam offset on microstructure and mechanical properties of dissimilar electron beam welded high temperature titanium alloys10.1016/j.matdes.2017.03.056 ↗
29. Welding metallurgy and weldability of stainless steels, Wiley, Hoboken, NJ Barbero B, Ureta E (2011) Comparative study of different digitization techniques and their accuracy
30. Effect of electron beam welding current variations on the microstructure and mechanical properties of Nb-1Zr advanced alloy10.1016/j.vacuum.2018.01.043 ↗
31. A. International, A.I.H. Committee, A.I.A.P.D. Committee · 1990
32. Fe-Nb (iron-niobium)10.1361/105497102770332397 ↗
33. Electron beam welding of difficult-to-weld austenitic stainless steel/Nb-based alloy dissimilar joints without interlayer10.1016/j.vacuum.2017.09.046 ↗
34. Kou · 2003