journal article·2020-11

Tungsten-based heterogeneous multilayer structures via diffusion bonding

X.X. Chen, J. Shen, L.J. Kecskes, Q. Wei

Publisher page

Abstract

Recent work has shown that tungsten (W) and other refractory metals with body-centered cubic (bcc) structures exhibit certain novel behavior when their grain size, d , is refined into the ultrafine (UFG, 100 nm < d < 1000 nm) or nanocrystalline (NC, d < 100 nm) regime. For example, it has been shown that bcc refractory metals with such microstructures show decreased strain rate sensitivity besides their elevated strength and vanishing strain hardening response. Consequently, under both quasi-static and high-strain-rate loading, plastic instability in the form of shear banding becomes the dominant mode of plastic deformation. Such behavior is long sought-after in certain applications. However, due to the technology used to refine the grain size (primarily severe plastic deformation), the inability to scale the dimensions of the material may limit wider use and application of UFG/NC bcc refractory metals. In this work, the feasibility was demonstrated of production of large-scale W parts using a diffusion bonding method. The microstructure, preliminary mechanical properties, and issues and challenges associated with the fabrication procedures were examined and discussed. It is envisioned that diffusion bonding may serve as a promising technology for scaled-up fabrication of UFG bcc refractory metals for the targeted application.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. High strain rate deformation behaviors of kinetic energy penetrator materials during ballistic impact10.1016/0167-6636(94)90055-8 ↗
2. A review of tungsten-based alloys as kinetic energy penetrator materials
3. Properties and performance of KE penetrator materials
4. Magness · 1992
5. Leonard · 1995 · 60
6. On the localization of shear deformations in tungsten heavy alloys10.1016/0167-6636(94)90057-4 ↗
7. Grain size engineering of bcc refractory metals: top-down and bottom-up—application to tungsten10.1016/j.msea.2007.02.099 ↗
8. Nano-structured vanadium: processing and mechanical properties under quasi-static and dynamic compression10.1016/j.scriptamat.2003.10.010 ↗
9. Mechanical behavior and dynamic failure of high-strength ultrafine grained tungsten under uniaxial compression
10. Microstructure and mechanical properties at different length scales and strain rates of nanocrytalline tantalum produced by high pressure torsion10.1016/j.actamat.2010.12.042 ↗
11. Plastic flow localization in bulk-tungsten with ultrafine microstructure10.1063/1.1875754 ↗
12. Nanoengineering opens a new era for tungsten as well10.1007/s11837-006-0081-1 ↗
13. Dynamic behavior of body-centered cubic metals with ultrafine grained and nanocrystalline microstructures10.1016/j.msea.2007.05.126 ↗
14. Microstructure and mechanical properties of super-strong nanocrystalline tungsten processed by high-pressure torsion10.1016/j.actamat.2006.05.005 ↗
15. Effect of low-temperature rolling on the tensile behavior of commercially pure tungsten10.1016/j.msea.2008.01.013 ↗
16. Effect of low-temperature rolling on the propensity to adiabatic shear banding of commercial purity tungsten10.1016/j.msea.2013.04.109 ↗
17. Kazakov · 2013
18. Diffusion bonding of a microduplex stainless steel to ti-6Al-4V10.1016/S1359-6462(01)01041-7 ↗
19. Diffusion of Fe atoms on W surfaces and Fe/W films and along surface steps10.1103/PhysRevB.70.195426 ↗
20. Investigation on the diffusion bonding of tungsten and EUROFER9710.1016/j.jnucmat.2010.12.121 ↗
21. Diffusion bonding between W and EUROFER97 using V interlayer10.1016/j.jnucmat.2012.05.049 ↗
22. Bonding W and W-Cu composite with an amorphous W-Fe coated copper foil through hot pressing method10.1016/j.matdes.2012.05.057 ↗
23. Bonding tungsten, W–Cu-alloy and copper with amorphous Fe–W alloy transition10.1016/j.fusengdes.2013.02.167 ↗
24. Process optimization for diffusion bonding of tungsten with EUROFER97 using a vanadium interlayer10.1016/j.jnucmat.2015.01.033 ↗
25. Microstructure and mechanical properties of W/Cu vacuum diffusion bonding joints using amorphous Fe–W alloy as interlayer10.1016/j.vacuum.2015.01.008 ↗
26. Diffusion of tungsten in α-iron10.1080/14786430600732093 ↗
27. Microstructure and mechanical properties of diffusion bonded joints between tungsten and F82H steel using a titanium interlayer10.1016/j.jallcom.2009.09.105 ↗
28. Massalski · 1990
29. X. Chen, Processing and properties of materials with or without adiabatic shear susceptibility, PhD Dissertation, UNC-Charlotte, 2018.
30. Lassner · 2012
31. Prasad · 2015
32. Henshall · 1993
33. Chen · 2011
34. High strain rate compression testing
35. Peterson · 1960
36. Diffusion of tungsten in alpha-iron10.1080/14786430600732093 ↗
37. Study of grain-boundary diffusion of iron in tungsten by means of autoradiographic and secondary-ion mass-spectrometric methods10.1002/pssa.2210260236 ↗
38. High temperature diffusion measurements in tungsten metal by means of autoradiography
39. Thermomechanical analysis of diffusion-bonded tungsten/EUROFER97 with a vanadium interlayer10.1016/j.jnucmat.2014.09.007 ↗
40. Fabrication of tungsten-vanadium hybrid material with sufficient toughness for high-temperature applications by diffusion bonding10.13182/FST13-773 ↗
41. Strain rate effects in the ultrafine grain and nanocrystalline regimes—influence on some constitutive responses10.1007/s10853-006-0700-9 ↗
42. Effects of high strain rate on properties and microstructure evolution of TWIP steel subjected to impact loading10.1016/S1006-706X(10)60116-1 ↗
43. Wright · 2002
44. Bai · 1992
45. Dynamic mechanical behavior of ultrafine and nanocrystalline refractory metals, Chapter 8
46. Canonical aspects of adiabatic shear bands10.1016/S0749-6419(97)80002-2 ↗
47. Temperature rise associated with adiabatic shear band: causality clarified10.1103/PhysRevLett.122.015503 ↗
48. Dynamic failure of titanium: temperature rise and adiabatic shear band formation10.1016/j.jmps.2019.103811 ↗
49. A comparative study on the microstructure and mechanical behavior of titanium: ultrafine grain vs. coarse grain10.1016/j.msea.2016.05.093 ↗
50. Mechanical behavior of microstructure engineered multi-length-scale titanium over a wide range of strain rates10.1016/j.actamat.2013.03.011 ↗
51. Microstructural characteristics of post-shear localization in cold-rolled 316L stainless steel10.1016/j.actamat.2006.09.001 ↗
52. Development of adiabatic shear bands in annealed 316L stainless steel: part I. correlation between evolving microstructure and mechanical behavior10.1007/BF02586217 ↗
53. Development of adiabatic shear bands in annealed 316L stainless steel: part II. TEM studies of the evolution of microstructure during deformation localization10.1007/BF02586218 ↗
54. Self-organization of shear bands in titanium and ti-6Al-4V alloy10.1016/S1359-6454(01)00356-1 ↗
55. Effect of strain rate on the mechanical properties of a gum metal with various microstructures10.1016/j.actamat.2017.04.052 ↗