journal article·2018-02

Phase evolution in synthesis of nanocrystalline WC-η composite powder by solid-state in situ reactions

Haibin Wang, Chao Hou, Xuemei Liu, Xingwei Liu, Xiaoyan Song

Publisher page

Abstract

Abstract Replacement of Co with η phase (e.g. Co6W6C and Co3W3C) is proposed as an effective approach to resist against corrosion of WC-Co coatings in environment of molten zinc. In the present work, the nanocrystalline WC-η powder was firstly synthesized as the coating material by a novel method of in situ reactions using metal oxides and carbon black as raw materials. The phase evolution in the process of in situ synthesis was investigated by thermodynamic calculations and experiments. It was found that the initial WO3, Co3O4 and C transformed firstly to CoWO4, then to W and W2C, and eventually to η and WC. The formation of η phase decreases the energy barrier for WC formation and hence the synthesis temperature for the composite powder. The duplex phase constitution of WC and η was obtained with optimized conditions, and the composite powder had a mean particle size of about 190 nm with inner grain size of about 50 nm. The amount of Co in the composite is controllable by adjusting the carbon addition to the starting materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Effects of boron concentration on the corrosion resistance of Fe-B alloys immersed in 460°C molten zinc bath10.1016/j.surfcoat.2009.12.010 ↗
2. MoB/CoCr cermet coatings by HVOF spraying against erosion by molten Al-Zn alloy10.1007/s11666-007-9046-3 ↗
3. Improving the corrosion resistance of Fe-21Cr-9Mn alloy in liquid zinc by heat treatment10.1016/j.corsci.2016.05.018 ↗
4. Degradation behaviour of boronized carbon and high alloy steels in molten aluminium and zinc10.1016/S0167-577X(98)00077-9 ↗
5. Materials resistance to liquid zinc corrosion on surface of sink roll10.1016/S1006-706X(08)60066-7 ↗
6. The corrosion of intermetallic alloys in liquid zinc10.1016/j.jallcom.2006.02.072 ↗
7. Reaction of WC-Co coating with molten zinc in a zinc pot of a continuous galvanizing line10.1016/S0257-8972(00)01136-1 ↗
8. Durability of sprayed WC/Co coatings in Al-added zinc bath10.2355/isijinternational.34.822 ↗
9. MoB-CoCr as alternatives to WC-12Co for stainless steel protective coating and its corrosion behavior in molten zinc10.1016/j.surfcoat.2013.08.052 ↗
10. Abrasive wear behavior of detonation sprayed WC-12Co coatings: influence of decarburization and abrasive characteristics10.1016/j.wear.2010.02.013 ↗
11. Sliding wear behaviour of conventional and nanostructured HVOF sprayed WC-Co coating10.1016/j.wear.2005.02.059 ↗
12. Mechanical properties and microstructure evolution of the nano WC-Co coatings fabricated by detonation gun spraying with post heat treatment10.1016/j.msea.2006.02.444 ↗
13. Tribological behavior of nanostructured high velocity oxy-fuel (HVOF) thermal sprayed WC-17NiCr coatings10.1016/j.ceramint.2016.10.193 ↗
14. A study on HVOF coatings of micron and nano WC-Co powders10.1016/j.surfcoat.2008.06.106 ↗
15. Comparative study of the friction and wear behavior of plasma sprayed conventional and nanostructured WC-12%Co coatings on stainless steel10.1016/j.msea.2006.06.009 ↗
16. Preparation of ultrafine WC-Co composite powder by in situ reduction and carbonization reactions10.1016/j.ijrmhm.2008.05.001 ↗
17. Chemical synthesis of WC-Co from water-soluble precursors: the effect of carbon and cobalt additions to WC synthesis10.1016/j.ijrmhm.2015.11.014 ↗
18. Phase evolution in the synthesis of WC-Co-Cr3C2-VC nanocomposite powders from precursors10.1016/j.ijrmhm.2013.03.007 ↗
19. Synthesis of WC nanopowders from novel precursors10.1016/j.ijrmhm.2011.01.007 ↗
20. Combustion synthesis of WC powder in the presence of alkali salts10.1016/j.matlet.2005.07.042 ↗