Comparative studies of the oxidation of MoSi2 based materials: Low-temperature oxidation (300–900 °C)
Source abstract
Abstract
Abstract Molybdenum disilicide (MoSi2) rapidly oxidizes at 400–600 °C, which given enough time, can lead to its disintegration. Above 1000 °C, MoSi2 exhibits better oxidation resistance due to the formation of a continuous SiO2 layer (or alumina layer for the materials doped with aluminum). However, during high-temperature service, the protective layer on MoSi2 could be damaged, e.g. due to erosion, volatilization, and micro-cracks in thermal cycling, or due to exposure to reducing atmospheres. In this study, the oxidation characteristics of MoSi2 based materials were investigated in air, with the pre-oxidized protective layer removed to simulate such surface damages. Five different, commercially available, MoSi2 based heating elements, i.e. Kanthal Super (labelled by the manufacturer as KS-1700, KS-1800, KS-1900, KS-ER and KS-HT) were exposed to 300 to 900 °C isothermally, for 12 to 240 h, and their mass changes determined. Scanning Electron Microscopy, Energy-dispersive X-ray spectroscopy, and X-ray diffraction analyzed the microstructure, chemical composition and phase composition of the oxidized samples. It was found that the oxidation behavior of the different materials under investigation depended strongly on their chemical and phase composition, exposure time and temperature. KS-ER, KS-1800 and KS-1700 showed better resistance against the low temperature (300 to 900 °C) degradation for up to 240 h, while KS-HT and KS-1900 underwent significant degradation after 240 h of air exposure within the same temperature range. For rapid comparison of the materials damage sensitivity we propose a novel Cumulative Mass vs Temperature Index CMTI, including both mass gain and loss at temperatures ranging from 300 to 900 °C. The index allows quick ranking of the materials under consideration.
Source: openaire · Quality: candidate unverified · Source record ↗
References (48)
Show source-provided references
1. Über das molybdänsilicid MoSi2, das wolframsilicid WSi2 und das tantalsilicid TaSi210.1007/BF01512021 ↗
2. Molybdenum silicide based materials and their properties10.1361/105994999770346837 ↗
3. A comparative overview of molybdenum disilicide composites10.1016/0921-5093(92)90308-N ↗
4. Oxidation of stoichiometric poly- and single-crystalline MoSi2 at 773K10.1016/j.intermet.2005.08.001 ↗
5. Kanthal Super Electric Heating Element Handbook
6. Molybdenum disilicide — diffusion, defects, diffusion correlation, and creep10.4028/www.scientific.net/DDF.322.107 ↗
7. Key developments in high temperature structural silicides10.1016/S0921-5093(98)01043-0 ↗
8. Thermal properties of MoSi2 with minor aluminum substitutions10.1016/j.intermet.2006.03.013 ↗
9. Molybdenum Disilicide as High-Temperature Material
10. Low temperature oxidation behavior of a MoSi2-based material10.1016/S0921-5093(98)01071-5 ↗
11. Effect of microstructure on the high temperature oxidation and pesting behaviour of MoSi210.4028/www.scientific.net/MSF.461-464.439 ↗
12. Oxidation behaviour of arc-melted and uniaxial hot pressed MoSi2 at 500°C10.1016/j.intermet.2010.07.003 ↗
13. Low temperature oxidation of fully dense and porous MoSi210.1016/S0921-5093(98)01078-8 ↗
14. A study of pest oxidation in polycrystalline MoSi210.1557/JMR.1992.2747 ↗
15. The role of microstructure on pesting during oxidation of MoSi2 and Mo(Si, Al)2 at 773 K10.1007/BF01668515 ↗
16. High-temperature applications of intermetallic compounds10.1557/S0883769400035478 ↗
17. Enhanced oxidation of molybdenum disilicide under tensile stress: relation to pest mechanisms10.1007/BF02811558 ↗
18. The intermediate-temperature oxidation behavior of molybdenum disilicide
19. Molybdenum disilicide as a component of modern high-temperature composites
20. Pest disintegration of thin MoSi2 films by oxidation at 500C10.1007/BF01117608 ↗
21. Molybdändisilicid, ein hochtemperaturwerkstoff für extreme chemische und thermische beanspruchungen10.1002/maco.19650160604 ↗
22. Oxidation of MoSi2 and comparison with other silicide materials10.1016/0921-5093(92)90324-T ↗
23. Oxidation of MoSi2/TiB2 and MoSi2/Al2O3 mixtures10.1016/0956-716X(91)90502-R ↗
24. On the oxidation behaviour of MoSi210.1016/S0966-9795(00)00114-X ↗
25. Thermodynamic reassessment of the Mo–Si and Al–Mo–Si systems10.1016/S0966-9795(00)00068-6 ↗
26. Thermodynamic assessment of the silicon-oxygen system10.1016/0364-5916(92)90038-Y ↗
27. A thermodynamic study of the molybdenum–oxygen system10.1007/BF02662770 ↗
28. SGTE data for pure elements10.1016/0364-5916(91)90030-N ↗
29. High-temperature oxidation of MoSi210.1007/s10853-009-4012-8 ↗
30. Effect of high-temperature preoxidation treatment on the low-temperature oxidation behavior of a MoSi2-based composite at 500°C10.1016/j.jallcom.2008.06.032 ↗
31. Engineering limitations of MoSi2 coatings10.1016/0921-5093(92)90313-P ↗
32. Oxidation of molybdenum disilicide10.1007/BF00550120 ↗
33. Oxidation behaviour of particle reinforced MoSi2 composites at temperatures up to 1700°C Part I: l review10.1002/maco.200403831 ↗
34. The influence of water vapor on the oxidation of MoSi2 at 450°C10.4028/www.scientific.net/MSF.369-372.419 ↗
35. Hansson · 2003
36. The beneficial effect of water vapour on the oxidation at 600 and 700°C of a MoSi2-based composite10.1016/j.jeurceramsoc.2004.01.005 ↗
37. Strong, tough, and pest resistant MoSi2-base hybrid composite for structural applications
38. Synthesis of molybdenum disilicide by mechanical alloying10.1016/0921-5093(92)90314-Q ↗
39. Combustion synthesis of MoSi2–WSi2 alloys10.1016/0921-5093(94)90904-0 ↗
40. Mechanical behavior of MoSi2 and MoSi2 composites10.1016/0921-5093(94)03246-7 ↗
41. Mechanical behaviour and oxidation resistance of structural silicides10.1179/174328006X79454 ↗
42. Improvement of MoSi2 oxidation resistance via boron addition: fabrication of MoB/MoSi2 composite by mechanical alloying and subsequent reactive sintering10.1016/j.powtec.2014.01.034 ↗
43. E. Gosta, G. Nils, Electric Heating Unit, 14 1953. US Patent.
44. Moulson · 2003
45. Alumina forming high temperature silicides and carbides10.1016/j.ceramint.2003.12.046 ↗
46. Oxidation behavior of a Mo (Si, Al)2-based composite at 300–1000°C10.1016/j.intermet.2009.10.019 ↗
47. High temperature oxidation of MoSi2–WSi2 solid solutions
48. Oxidation behavior of tungsten and germanium-alloyed molybdenum disilicide coatings10.1016/0921-5093(92)90326-V ↗