Comparative studies on corrosion and tribological performance of multilayer hard coatings grown on WC-Co hardmetals
Source abstract
Abstract
Abstract Multilayer TiN/Ti C N/TiC N /TiC/TiN and TiN/Ti C N/TiC N /TiC/Al2O3 hard coatings with total thicknesses of 15.7 μm and 9.3 μm were deposited on WC-10Co substrates using a chemical vapor deposition system. Evaluation of surface, cross-section morphologies, chemical composition and phases of coatings were analyzed by field emission scanning electron microscopy (FESEM), energy dispersive spectrometry (EDS) and X-ray diffraction (XRD) analyses respectively. Corrosion properties were evaluated in 3.5 wt% NaCl medium using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). Tribological properties of fabricated multilayer hard coatings were evaluated using pin-on-disk tests. Results show that active dissolution of the WC-10Co occurred while the coated samples showed more anodic slopes as well as lower corrosion current densities. The corrosion current densities of 3.3 × 10−7 A/cm2 and 7.5 × 10−8 A/cm2 were obtained for the TiN/Ti C N/TiC N /TiC/TiN and TiN/Ti C N/TiC N /TiC/Al2O3 coated specimens which are much lower than 4 × 10−6 A/cm2 of substrate. EIS analysis confirmed the results of potentiodynamic polarization curves. Delamination of the TiN coating and formation of titanium oxide compounds on the surface of the TiN/Ti C N/TiC N /TiC/TiN coating revealed that oxidative wear mechanism is dominant for this sample, while adhesive wear mechanism was dominant for the TiN/Ti C N/TiC N /TiC/Al2O3 coated sample.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Wear properties of sintered WC-12% co processed via binder jet 3D printing (BJ3DP)10.1016/j.ijrmhm.2018.10.003 ↗
2. Effect of Al2O3 ceramic binder on mechanical and microstructure properties of spark plasma sintered WC-Co cermets10.1016/j.ijrmhm.2017.08.010 ↗
3. Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire in zipper production10.1016/j.wear.2018.12.075 ↗
4. High-temperature oxidation and wear resistance of WC-Co based coatings with WB addition10.1016/j.jeurceramsoc.2019.04.002 ↗
5. Effect of SiC nano-whisker addition on WC–Ni based cemented carbides fabricated by hot-press sintering10.1016/j.ijrmhm.2012.10.009 ↗
6. Analytical characterization of the corrosion mechanisms of WC-Co by electrochemical methods and inductively coupled plasma mass spectroscopy10.1016/j.corsci.2006.08.022 ↗
7. Improved electrochemical and mechanical performance of WC-Co cemented carbide by replacing a part of Co with Al2O310.1016/j.jallcom.2020.153857 ↗
8. Double-layer coatings on WC-Co hardmetals containing diamond and titanium carbide/nitride10.1016/S0925-9635(00)00214-4 ↗
9. Corrosion resistance appraisal of TiN, TiCN and TiAlN coatings deposited by CAE-PVD method on WC–Co cutting tools exposed to artificial sea water10.1016/j.apsusc.2015.08.041 ↗
10. Inclined impact-sliding wear tests of TiN/Al2O3/TiCN coatings on cemented carbide substrates10.1016/j.surfcoat.2011.09.067 ↗
11. Effect of TiAlN PVD coatings on corrosion performance of WC–6%co10.1179/174329408X326399 ↗
12. Influence of cutting speed and workpiece material on the wear mechanisms of CVD TiCN/Α-Al2O3coated cutting inserts during turning10.1016/j.wear.2017.11.019 ↗
13. Evolution of conventional hard coatings for its use on cutting tools10.1016/j.ijrmhm.2016.05.009 ↗
14. Characterization of TiCN and TiCN/ZrN coatings for cutting tool application10.1016/j.ceramint.2012.07.061 ↗
15. Wear performance of diamond coated WC-Co tools with a CrN interlayer10.1016/j.diamond.2016.12.001 ↗
16. Study on tribological behavior and cutting performance of CVD diamond and DLC films on Co-cemented tungsten carbide substrates10.1016/j.apsusc.2009.10.092 ↗
17. Production and characterization of wear resistant Ti(C,N) coatings manufactured by modified chemical vapor deposition process10.1016/j.surfcoat.2010.09.013 ↗
18. Wear resistance investigation of titanium nitride-based coatings10.1016/j.ceramint.2015.04.152 ↗
19. Diamond-like carbon-deposited films: a new class of bio-corrosion protective coatings10.1680/jsuin.18.00002 ↗
20. Diamond-like carbon thin films prepared by pulsed-DC PE-CVD for biomedical applications10.1680/jsuin.17.00069 ↗
21. Improved electrochemical performance of nitrocarburised stainless steel by hydrogenated amorphous carbon thin films for bone tissue engineering10.1049/iet-nbt.2016.0163 ↗
22. Enhancing the adhesion of diamond-like carbon films to steel substrates using silicon-containing interlayers10.1016/j.surfcoat.2018.06.055 ↗
23. Effect of structure and residual stresses of diamond coated cemented carbide tools on the film adhesion and developed wear mechanisms in milling10.1016/j.cirp.2016.04.007 ↗
24. Ambient and elevated temperature properties of TiN, TiAlN and TiSiN PVD films and their impact on the cutting performance of coated carbide tools10.1016/j.surfcoat.2009.07.001 ↗
25. The role of cemented carbide functionally graded outer-layers on the wear performance of coated cutting tools10.1016/j.ijrmhm.2011.12.007 ↗
26. Properties and performance of commercial TiCN coatings. Part 2: tribological performance10.1016/S0257-8972(02)00651-5 ↗
27. Structure and properties of the wear resistant coatings obtained in the PVD and CVD processes on tool ceramics10.4028/www.scientific.net/MSF.513.119 ↗
28. The microstructure of CVD κ-Al2O3 multilayers separated by thin intermediate TiN or TiC layers10.1016/j.ijrmhm.2005.06.007 ↗
29. Design and characterization of novel wear resistant multilayer CVD coatings with improved adhesion between Al2O3 and Ti (C, N)10.1002/adem.201000130 ↗
30. High-performance coatings for cutting tools10.1016/j.cirpj.2016.11.004 ↗
31. Microstructure and corrosion behavior of TiC/Ti(CN)/TiN multilayer CVD coatings on high strength steels10.1016/j.apsusc.2013.05.037 ↗
32. Electrochemical polarization I. A theoretical analysis of the shape of polarization curves10.1149/1.2428496 ↗
33. Impedance study on the corrosion of PVD and CVD titanium nitride coatings
34. One- and two-dimensional polymer films of modified alkanethiol monolayers for preventing iron from corrosion10.1016/S0010-938X(98)00048-1 ↗
35. Corrosion behavior of WC-Co hardmetals in the oil-in-water emulsions containing sulfate reducing Citrobacter sp10.1016/j.corsci.2015.01.036 ↗
36. Effect of WC grain size on the corrosion behavior of WC-Co based hardmetals in alkaline solutions10.1016/j.ijrmhm.2009.02.004 ↗
37. Influence of experimental factors on the constant phase element behavior of Pt electrodes10.1016/j.electacta.2011.02.068 ↗
38. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
39. The analysis of electrode impedances complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
40. Enhanced graphical representation of electrochemical impedance data10.1149/1.2168377 ↗
41. Pourbaix · 1974
42. XPS, and microcapillary investigation of the local corrosion mechanisms of WC–Co hardmetal10.1149/1.2929822 ↗
43. Evaluation of microstructure and electrochemical behavior of dual-layer NiCrAlY/mullite plasma sprayed coating on high silicon cast iron alloy10.1016/j.ceramint.2017.07.155 ↗
44. A comparative study on wear behavior of TiN and diamond coated WC-Co substrates against hypereutectic Al-Si alloys10.1016/j.apsusc.2012.08.049 ↗
45. XPS investigations of tribolayers formed on TiN and (Ti, Re) N coatings10.1016/j.apsusc.2014.12.023 ↗
46. Tribo-layer formation during sliding wear of TiN coatings10.1016/S0043-1648(00)00482-8 ↗
47. Tribological behavior of TiN and CrN coatings sliding against an epoxy molding compound10.1016/S0257-8972(00)00709-X ↗
48. Influence of laser substrate pretreatment on anti-adhesive wear properties of WC/Co-based TiAlN coatings against AISI 316 stainless steel10.1016/j.ijrmhm.2016.03.004 ↗