Pressureless sintering of W Ni nanoparticles prepared by ultrasonic spray pyrolysis and hydrogen reduction
Source abstract
Abstract
The synthesis of homogenous powder mixtures and the characteristic of the sintered W-0.4 wt% Ni compacts were investigated. Ultrasonic spray pyrolysis and polymeric additive solution route for developing the initial powder mixtures were compared based on the resulting microstructure and mechanical property of sintered W Ni. The powder mixture synthesized by the ultrasonic spray pyrolysis and hydrogen reduction showed marked refinement of W particle size and homogeneous dispersion of the Ni activator in the form of nickel hydroxide. The W Ni powder from ultrasonic spray pyrolysis, pressureless-sintered at 1400 °C, exhibited the increased relative density of 97.6% and hardness of 4.02 GPa compared with the powder from polymeric additive solution. XPS analysis revealed that Ni, existed as nickel hydroxide state in the powder mixture, was partially dissolved in W during sintering to form an alloy. The increase in relative density was explained by the uniform W Ni nanocomposite powder synthesized by ultrasonic spray pyrolysis. The high hardness was mainly due to the refinement of W grains.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Lassner · 1999
2. A review of chromium, molybdenum, and tungsten alloys10.1016/0022-5088(75)90046-6 ↗
3. Densification and grain growth during sintering of nanosized particles10.1179/174328008X353538 ↗
4. Coarsening, densification, and grain growth during sintering of nano-sized powders—a perspective10.1016/j.ijrmhm.2016.09.004 ↗
5. Sinter-ability of nanocrystalline tungsten powder10.1016/j.ijrmhm.2009.11.003 ↗
6. The relationship between compactibility and shrinkage rate in the activated sintering of nickel-doped tungsten10.1179/pom.17.34.1974.008 ↗
7. Enhanced low-temperature sintering of tungsten10.1007/BF02659818 ↗
8. Effect of heating mode on sintering of tungsten10.1016/j.ijrmhm.2010.05.002 ↗
9. The effects of alumina reinforcement and nickel activated sintering on nanosized tungsten matrix10.1016/j.jallcom.2016.09.081 ↗
10. The effect of trace nickel additive and ball milling treatment on the near-full densification behavior of ultrafine tungsten powder10.1016/j.ijrmhm.2012.02.014 ↗
11. Fabrication and characterization of W-Ni nanocomposites via a facile chemical co-precipitation route10.1016/j.apt.2021.01.035 ↗
12. Ultrasonic spray pyrolysis for nanoparticles synthesis10.1023/B:JMSC.0000030718.76690.11 ↗
13. Synthesis of nanosized spherical cobalt powder by ultrasonic spray pyrolysis10.1016/j.materresbull.2006.03.006 ↗
14. A comprehensive review on ultrasonic spray pyrolysis technique: mechanism, main parameters and applications in condensed matter
15. Fabrication of W-Y2O3-La2O3 composite by chemical process and spark plasma sintering10.1080/00325899.2021.1883253 ↗
16. Reduction of tungsten oxide to tungsten metal10.1007/BF02698592 ↗
17. Chemical state analysis of tungsten and tungsten oxides using an electron porbe microanalyzer10.1143/JJAP.43.7292 ↗
18. Interpretation of Ni2p XPS spectra of Ni conductors and Ni insulators10.1007/s002690050265 ↗
19. An earth-abundant tungsten-nickel alloy electrocatalyst for superior hydrogen evolution10.1021/acsanm.7b00383 ↗
20. Electrical resistance measurement in the activated sintering process of the nickel-doped tungsten-powder compact10.1016/0022-5088(86)90133-5 ↗
21. Investigations of the nickel promotional effect on the reduction and sintering of tungsten compounds10.1016/j.ijrmhm.2018.10.008 ↗