journal article·2014-07

A new method of fabrication of TiC by employing pyrolytic carbon black and titanium

Wang Jianxin, Ni Yaru Gao Dongshan, Lu Chunhua, Fang Zhanggang, Xu Zhongzi

Publisher page

Abstract

Abstract A new method to synthesize titanium carbide (TiC) from polysiloxanes and titanium (Ti) by employing an in situ reaction is presented. The factors, such as, the annealing temperature and Ti particle size, were found to play a significant effect on the phase composition, structure, thermal behavior, and textural morphology of as-prepared TiC. Moreover, the relative intensity ratio (RIR) method was applied to evaluate the phase purity of TiC. Results demonstrated that the phase purity of the TiC prepared at 1400 °C for 2 h under the argon atmosphere is approximately up to 100%, confirming the feasibility of the presented new method.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. TiC nanorods derived from cotton fibers: chloride-assisted VLS growth, structure, and mechanical properties10.1021/cg2005979 ↗
2. Low-temperature preparation of single crystal titanium carbide nanofibers in molten salts10.1021/cg200386d ↗
3. Storms · 1967
4. Pierson · 1996
5. Study of formation behavior of TiC ceramic obtained by self-propagating high-temperature synthesis from Al–Ti–C elemental powders10.1016/j.ijrmhm.2008.09.009 ↗
6. Surface chemistry of transition metal carbides10.1021/cr0204606 ↗
7. Low-temperature preparation of single crystal titanium carbide nanofibers in molten salts10.1021/cg200386d ↗
8. TiC nanocrystal formation from carburization of laser-grown Ti/O/C nanopowders for nanostructured ceramics10.1021/jp054471p ↗
9. Morphology evolution of TiCx grains during SHS in an Al–Ti–C system10.1021/cg800527q ↗
10. TiC nanocrystal formation from carburization of laser-grown Ti/O/C nanopowders for nanostructured ceramics10.1021/jp054471p ↗
11. Morphology evolution of TiCx grains during SHS in an Al–Ti–C system10.1021/cg800527q ↗
12. Synthesis of nanosized cubic phase early transition metal carbides from metal chlorides and n-butyllithium10.1039/b203927c ↗
13. Effect of Ni content on the reaction behaviors of self-propagating high-temperature synthesis in the Ni–Ti–B4C system10.1016/j.ijrmhm.2007.03.001 ↗
14. Silicon-containing poly-derived ceramic nanocomposites (PDC-NCs): preparative approaches and properties10.1039/c2cs15319j ↗
15. Preparation of SiC nanowires-filled cellular SiCO ceramics from polymeric precursor10.1016/j.ceramint.2012.05.081 ↗
16. Pyrolysis of titanium-metal-filled poly(siloxane) preceramic polymers: effect of atmosphere on pyrolysis product chemistry10.1111/j.1151-2916.1995.tb08894.x ↗
17. Fabrication of high-purity Ti3SiC2 powders by an in situ reaction of polycarbosilane and metal titanium10.1111/j.1551-2916.2010.03672.x ↗
18. Quantitative interpretation of X-ray diffraction patterns: I. Matrix flushing method of quantitative multicomponent analysis10.1107/S0021889874010375 ↗