journal article·2012-03

Effect of reactive gas composition on the microstructure, growth mechanism and friction coefficient of TiC overlayers

P.K. Ajikumar, M. Vijayakumar, M. Kamruddin, S. Kalavathi, N. Kumar, T.R. Ravindran, A.K. Tyagi

Publisher page

Abstract

Abstract Titanium carbide overlayers were synthesized by gas phase carburization of titanium at 1150 °C with varying reactive gas compositions and durations. These layers were investigated by X-ray diffraction, tribometry, Raman spectroscopy and scanning electron microscopy. Titanium carbide layers exhibited very low coefficient of friction due to the presence of amorphous carbon on the surface. The growth mechanism and the surface microstructure of the layers showed a critical dependence on methane content in the reactive gas mixture.
Source: openaire · Quality: candidate unverified · Source record ↗

References (25)

Show source-provided references
1. Friction and wear of sliding couples coated with TiC, TiN or TiB210.1016/0257-8972(90)90120-2 ↗
2. Self-lubrication and wear behavior of TiC/a-C:H nanocomposite coatings10.4028/www.scientific.net/MSF.539-543.1074 ↗
3. Nanocomposite TiCraC:H hard coatings deposited by reactive PVD10.1016/S0257-8972(00)00888-4 ↗
4. Microstructure and properties of low friction TiC–C nanocomposite coatings deposited by magnetron sputtering10.1016/S0257-8972(01)01493-1 ↗
5. Mechanical and tribological properties of TiC/amorphous hydrogenated carbon composite coatings fabricated by DC magnetron sputtering with and without sample bias10.1016/j.diamond.2006.05.010 ↗
6. Evaluation of phase, composition, microstructure and properties in TiC/a-C:H thin films deposited by magnetron sputtering10.1016/j.apsusc.2004.05.278 ↗
7. Influence of the microstructure on the mechanical and tribological behavior of TiC/a-C nanocomposite coatings10.1016/j.tsf.2008.09.091 ↗
8. Pulsed ion beam-assisted carburizing of titanium in methane discharge10.1088/1674-1056/19/1/012801 ↗
9. Fabrication of titanium carbide film on bearing steel by plasma immersion ion implantation and deposition10.1016/j.surfcoat.2004.03.036 ↗
10. Surface nitridation of Ti and Cr in ammonia atmosphere10.1016/j.scriptamat.2004.05.024 ↗
11. The effect of metal interlayer on the friction, wear and adhesion of TiC coatings10.1016/S0257-8972(97)00570-7 ↗
12. Friction and adhesive wear of titanium carbide and titanium nitride overlay coatings10.1016/0040-6090(80)90487-3 ↗
13. Metal carbide/amorphous C-based nanocomposite coatings for tribological applications10.1016/j.surfcoat.2009.05.038 ↗
14. Tribological behaviour of titanium carbide/amorphous carbon nanocomposite coatings: from macro to the micro-scale10.1016/j.surfcoat.2008.02.012 ↗
15. Microstructure and tribological properties of magnetron sputtered nc-TiC/a-C nanocomposite10.1016/j.surfcoat.2004.10.041 ↗
16. Raman spectroscopy as a tool to study TiC formation during controlled ball milling10.1063/1.1927282 ↗
17. Raman scattering induced by carbon vacancies10.1103/PhysRevB.17.1546 ↗
18. Raman spectrum of graphite10.1063/1.1674108 ↗
19. Characterization of diamond films by Raman spectroscopy10.1557/JMR.1989.0385 ↗
20. Laser Raman spectroscopic studies on graphites from Dharwar craton: a possible metamorphic grade indicator for the host rocks
21. Raman spectroscopy sheds new light on TiC formation during the controlled milling of titanium and carbon10.1016/j.jallcom.2006.08.216 ↗
22. Friction-induced structural transformations of diamondlike carbon coatings under various atmospheres10.1016/S0257-8972(02)00641-2 ↗
23. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
24. Raman spectroscopy on amorphous carbon films10.1063/1.362745 ↗
25. A phenomenological approach for the Id/Ig ratio and sp3 fraction of magnetron sputtered a-C films10.1016/S0257-8972(99)00523-X ↗