journal article·2024-06

Effects of Hf and C on microstructure and mechanical properties of Re0.1HfxTa1.6W0.4(TaC)y refractory medium-entropy alloy

Haotian He, Jinxiang Fang, Zhi Yang, Tong Sun, Biao Ma, Haoteng Chen, Tingting Guo, Wenbo Wang, Yue Shen, Ming Wen

Publisher page

Abstract

The trade-off between high-temperature strength and room-temperature ductility represents a critical concern for practical application of refractory high-entropy alloys (RHEAs). Here, a set of five Re 0.1Hf xTa 1.6W 0.4(TaC) y refractory medium-entropy alloys (RMEAs) were fabricated using the vacuum arc melting technique, and the effect of Hf and C on the microstructures and mechanical properties of these alloys was investigated. These RMEAs exhibit excellent high-temperature strength and favorable plasticity at room-temperature. The microstructures of the Re 0.1Hf xTa 1.6W 0.4(TaC) y alloys are hypoeutectic or eutectic structures, consisting of BCC solid solution and primary and secondary carbides. The carbides can be classified into two types: M 2 C and MC. Hf and C have an important influence on the grain size, carbide type and spatial configuration of the alloy, and in turn, influence the mechanical properties of the alloy. For instance, the content of MC-type carbides is proportional to the addition of Hf element, whereby a higher proportion of Hf results in reduced plasticity at room-temperature and enhanced softening resistance at elevated temperatures in the alloy. The carbides and BCC matrix exhibit synergistic strengthening behavior. The ultimate compressive strength of the five Re 0.1Hf xTa 1.6W 0.4(TaC) y alloys at 1450 °C is >950 MPa, while maintaining a fracture strain exceeding 11% at room-temperature. Notably, the Re 0.1Hf 0.1Ta 1.6W 0.4(TaC) 0.25 alloy demonstrates a compressive strength of 1110 MPa at 1450 °C, which is 2.3 times greater than that of the NbMoTaW alloy at 1400 °C. Additionally, the fracture strain of the Re 0.1Hf 0.1Ta 1.6W 0.4(TaC) 0.25 alloy at room-temperature is 16.9%, which is 8 times higher than that of the NbMoTaW alloy. The Re 0.1Hf xTa 1.6W 0.4(TaC) y alloy exhibit excellent mechanical properties at both room and high temperatures, making it a potential candidate for applications in fields that require high strength at ultra-high temperatures.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Structures and properties of the (NbMoTaW)100−xCx high-entropy composites
2. Hypersonic airbreathing propulsion
3. Microstructures and high-temperature self-lubricating wear-resistance mechanisms of graphene-modified WC-12Co coatings10.1007/s40544-019-0346-7 ↗
4. Microstructure and luminescence properties of YSZ-based thermal barrier coatings modified by Eu2O310.1016/j.ceramint.2019.10.170 ↗
5. Radiation effects in refractory alloys10.1063/1.1649637 ↗
6. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys10.1016/j.intermet.2011.01.004 ↗
7. A novel ZrNbMoTaW refractory high-entropy alloy with in-situ forming heterogeneous structure10.1016/j.msea.2021.142061 ↗
8. Mechanical properties and phase stability of WTaMoNbTi refractory high-entropy alloy at elevated temperatures10.1007/s40195-021-01263-9 ↗
9. Influence of alloying elements on mechanical and electronic properties of NbMoTaWX (X = Cr, Zr, V, Hf and re) refractory high entropy alloys10.1016/j.intermet.2020.106928 ↗
10. Effects of Mo, Nb, Ta, Ti, and Zr on mechanical properties of Equiatomic Hf-Mo-Nb-Ta-Ti-Zr alloys10.3390/e21010015 ↗
11. Tensile fracture behaviors of a laser powder deposited Fe–30Mn–10Cr–10Co–3Ni high-entropy alloy: in situ x-ray computed microtomography study10.1016/j.msea.2022.142948 ↗
12. Microstructure and properties of an as-deposited and post treated high strength carbide-free bainite steel fabricated via laser powder deposition10.1016/j.msea.2021.141791 ↗
13. Microstructure and mechanical properties of in-situ MC-carbide particulates-reinforced refractory high-entropy Mo0.5NbHf0.5ZrTi matrix alloy composite10.1016/j.intermet.2015.09.011 ↗
14. Metal-carbide eutectics with multiprincipal elements make superrefractory alloys10.1126/sciadv.abo2068 ↗
15. Eutectic-like composite of MoNbWTaC with outstanding strength and plasticity at elevated temperature10.1016/j.matlet.2021.130739 ↗
16. Microstructure and mechanical properties of MoNbW(TaC)x composites10.1016/j.ijrmhm.2021.105574 ↗
17. Designing high entropy alloy-ceramic eutectic composites of MoNbRe0.5TaW(TiC)x with high compressive strength10.1016/j.jallcom.2019.152846 ↗
18. Impact response analysis of stiffened sandwich functionally graded porous materials doubly-curved shell with re-entrant honeycomb auxetic core10.1016/j.apm.2023.08.024 ↗
19. Influence of Ni and Cr on the high-temperature wear resistance of FeNiCrAl coatings10.1016/j.rinp.2018.12.061 ↗
20. High temperature wear performance of laser-cladded FeNiCoAlCu high-entropy alloy coating10.1016/j.apsusc.2018.03.135 ↗
21. Research on the microstructure and space tribology properties of electric-brush plated Ni/MoS2–C composite coating10.1016/j.surfcoat.2013.01.039 ↗
22. Effect of Re and C on mechanical properties of NbTaW0.4 refractory medium-entropy alloy at elevated temperature10.1016/j.jallcom.2022.167421 ↗
23. Carbide-reinforced Re0.1Hf0.25NbTaW0.4 refractory high-entropy alloy with excellent room and elevated temperature mechanical properties10.1016/j.ijrmhm.2023.106349 ↗
24. A carbide-reinforced Re0.5MoNbW(TaC)0.8 eutectic high-entropy composite with outstanding compressive properties10.1016/j.scriptamat.2021.113909 ↗
25. WReTaMo refractory high-entropy alloy with high strength at 1600°C
26. Microstructure and mechanical properties of CxHf0.25NbTaW0.5 refractory high-entropy alloys at room and high temperatures10.1016/j.jmst.2021.05.015 ↗
27. A novel NbTaW0.5 (Mo2C)x refractory high-entropy alloy with excellent mechanical properties10.1016/j.jallcom.2021.161800 ↗
28. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the Main alloying element10.2320/matertrans.46.2817 ↗
29. A thermodynamic description of the C–Hf–Ta system over the whole composition and temperature ranges10.1016/j.calphad.2016.02.001 ↗
30. Elevated-temperature deformation mechanisms in Ta2C: an experimental study10.1016/j.actamat.2013.01.043 ↗
31. A theoretical investigation of the slip systems of Ta2C10.1016/j.actamat.2013.01.047 ↗
32. Ultra-high temperature deformation in TaC and HfC10.1016/j.jeurceramsoc.2018.07.017 ↗
33. Review on development of metal/ceramic interpenetrating phase composites and critical analysis of their properties10.1016/j.ceramint.2021.09.232 ↗