Reactive synthesis and mechanical properties of Mo2NiB2 based hard alloy
Source abstract
Abstract
Abstract Using three elementary substances, Mo, Ni, and amorphous B powders as raw materials, the ternary boride based hard alloy Mo2NiB2–Ni was prepared successfully. The formation mechanism of the ternary phase was verified by XRD. It was indicated that the formed Mo2NiB2 particles at lower temperatures could be as seeds for the further formation of Mo2NiB2 directly from the raw materials of Mo, Ni and B at higher temperatures. The appearance of liquid phases between 1100 and 1200 °C was important for the densification of hard alloy. The microstructures of the hard alloys were observed by SEM. The main fracture modes for the hard alloys were different for the samples sintered at different temperatures. The maximum bending strength and the Rockwell hardness reached 1.85 ± 0.04 GPa and 85.7 ± 0.1 HRA, respectively. These values were comparable to those reported in literature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Abrasion resistance of nanostructured and conventional cemented carbides10.1016/S0043-1648(96)07277-8 ↗
2. Synthesis of WC and WC–Co cermets by mechanical alloying and subsequent hot isostatic pressing10.1016/S1359-6462(97)00410-7 ↗
3. Effect of ultra-fine powders on the microstructure of Ti(CN)–xWC–Ni cermets10.1016/j.actamat.2003.11.021 ↗
4. Processing of titanium–titanium boride dual matrix composites10.1016/j.jmatprotec.2007.05.047 ↗
5. Belt abrasion resistance and cutting tool studies on new ultra-hard boride materials10.1016/j.triboint.2008.10.013 ↗
6. New binder phases for the consolidation of TiB2 hardmetals10.1016/0921-5093(96)10408-1 ↗
7. Fracture behaviour of boride-dispersed composites fabricated by hot-pressing amorphous Ni60Mo30B10 powder10.1023/A:1004441205253 ↗
8. Development and application of high strength ternary boride base cermets10.1016/j.jssc.2006.01.023 ↗
9. Effect of Cr content on properties of (Mo, Ni) boride base hard alloys10.2320/jinstmet1952.57.7_813 ↗
10. Effect of Mn on valence-electron structure and properties of hard phase in Mo2FeB2-based cermets
11. Development of ternary-boride-based hard cladding material10.1016/S0025-5408(01)00824-8 ↗
12. High tough boride base cermets produced by reaction sintering10.1016/S0254-0584(00)00442-9 ↗
13. Effects of Mo/B atomic ratio on the mechanical properties and structure of Mo2NiB2 boride base cermets with Cr and V additions10.1006/jssc.2000.8847 ↗
14. Development of very high strength Mo2NiB2 complex boride base hard alloy10.1016/j.jssc.2003.03.008 ↗