journal article·2016-12

Sintering behavior and mechanical properties of spark plasma sintered β–SiAlON/TiN nanocomposites

Kh.A. Nekouee, R.A. Khosroshahi

Publisher page

Abstract

Abstract In this study, fully dense β-SiAlON/TiN composites were produced by Spark Plasma Sintering (SPS) method. Si3N4, Al2O3, AlN and TiO2 powders were used as precursors. Starting powders were mixed with high energy ball milling and then were sintered by SPS method (at 1750 °C under pressure of 30 MPa for 12 min.). The milled powders had an average particle size of below ~ 155 nm. The XRD patterns of SPS-ed composites showed that the entire β-SiAlON phase constituent was in the form of Si4Al2O2N6 phase and cubic TiN phase can be formed by the phase transformation of TiO2 in relation with other precursors. FESEM micrographs confirmed that TiN particles were distributed homogeneously throughout β-SiAlON matrix. Mechanical properties evaluation revealed that by adding micro sized TiO2, optimal mechanical properties with a hardness ~ 14.6 GPa and a fracture toughness ~ 6.3 MPa m1/2 were obtained. The improvement in the fracture toughness was attributed to the presence of the crack deflection as the dominant toughening mechanism in the SPS-ed β–SiAlON/TiN composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Peng · 2004
2. Combustion synthesis and spark plasma sintering of b-SiAlON
3. Ramadan · 2001
4. The effects of processing on the α↔β SiAlON transformation during cycling heat treatments10.1016/j.msea.2007.10.025 ↗
5. Self-propagating high temperature synthesis of SiAlON10.1016/j.ijrmhm.2015.11.010 ↗
6. Thermal shock resistance of α/β-sialon ceramic composites10.1016/S0955-2219(00)00303-4 ↗
7. Mechanochemical processing of sialon compositions10.1016/S0955-2219(02)00269-8 ↗
8. Wear properties of α-and α/β-SiAlON ceramics obtained by gas pressure sintering and spark plasma sintering10.1016/j.jeurceramsoc.2010.11.010 ↗
9. Wear properties of Y–α/β composite sialon ceramics10.1016/S0955-2219(02)00401-6 ↗
10. Temperature dependence of microstructure evolution during hot pressing of ZrB2–30vol.% SiC composites10.1016/j.ijrmhm.2015.06.017 ↗
11. Structural ceramics based on Si 3 N 4–ZrO 2 (+ Y 2 O 3) compositions10.1557/JMR.1987.0066 ↗
12. Microstructural development and mechanical properties of hot pressed SiC reinforced TiB 2 based composite10.1016/j.ijrmhm.2015.03.014 ↗
14. Sintering, properties and applications of silicon nitride and sialon ceramics10.2109/jcersj.99.1014 ↗
15. Microstructure and mechanical properties of TiN/Si3N4 nanocomposites by spark plasma sintering (SPS)10.1016/j.jallcom.2010.08.116 ↗
16. The effect of the wet-milling process on sintering temperature and the amount of additive of SiAlON ceramics10.1016/j.ceramint.2009.12.025 ↗
17. Kinetics of rare earth incorporation and its role in densification and microstructure formation of α-siAlON10.1016/j.jeurceramsoc.2011.05.026 ↗
18. Processing, characterization and mechanical properties of SiAlONs produced from low cost β-Si3N4 powder10.14356/kona.2013007 ↗
19. Spark plasma sintering of SiAlON nanopowders
20. Enhanced particle rearrangement during liquid phase spark plasma sintering of silicon nitride-based ceramics10.1016/j.ceramint.2010.08.019 ↗
21. Fabrication of dense β-SiAlON by a combination of combustion synthesis (CS) and spark plasma sintering (SPS)10.1016/j.intermet.2009.10.004 ↗
22. Properties of Si3N4–TiN composites fabricated by spark plasma sintering by using a mixture of Si3N4 and Ti powders10.1016/j.ceramint.2009.09.029 ↗
23. A comparison of sintering techniques using different particle sized β-SiAlON powders10.1016/j.jeurceramsoc.2011.08.026 ↗
24. The effect of mechanical activation on the properties of β-sialon precursors10.1016/j.jeurceramsoc.2007.05.003 ↗
25. Development of α-SiAlON-SiC ceramic composites by liquid phase sintering10.1016/j.ijrmhm.2006.01.004 ↗
26. Tien · 1995
27. β-SiAlON/TiN nanocomposites prepared from TiO 2-coated Si 3 N 4 powder10.1016/j.jeurceramsoc.2007.09.021 ↗
28. A Taguchi approach to the influence of hot pressing parameters and SiC content on the sinterability of ZrB2-based composites10.1016/j.ijrmhm.2015.03.002 ↗
29. Consolidation/synthesis of materials by electric current activated/assisted sintering10.1016/j.mser.2008.09.003 ↗
30. Significance of hot pressing parameters on the microstructure and densification behavior of zirconium diboride10.1016/j.ijrmhm.2015.01.004 ↗
31. Reactive hot pressing of ZrB2-based composites with changes in ZrO 2/SiC ratio and sintering conditions. Part II: mechanical behavior10.1016/j.ceramint.2015.10.166 ↗
32. Wear properties of self-reinforced α-SiAlON ceramics produced by spark plasma sintering10.1016/j.wear.2003.12.006 ↗
33. Spark plasma sintering of cBN/β-SiAlON composites10.1016/j.msea.2010.04.034 ↗
34. Spark plasma sintering: a powerful tool to develop new silicon nitride-based materials10.1016/j.jeurceramsoc.2010.01.025 ↗
35. Thermal shock behavior of Si3N4–TiN nano-composites10.1016/j.ijrmhm.2010.06.006 ↗
36. Hardness testing on advanced technical ceramics10.1016/S0955-2219(00)00214-4 ↗
37. A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements10.1111/j.1151-2916.1981.tb10320.x ↗
38. SiAlON ceramics from nanopowders10.1016/j.jeurceramsoc.2007.09.020 ↗
39. Kinetics of phase transformations in SiAlON ceramics: II. Reaction paths10.1016/S0955-2219(99)00099-0 ↗
40. Influence of β- Si3N4 particle size and heat treatment on microstructural evolution of α: β-SiAlON ceramics10.1016/j.jeurceramsoc.2010.10.001 ↗
41. New heat treatment methods for glass removal from silicon nitride and sialon ceramics10.1023/A:1026782723065 ↗
42. Si3N4/TiN composites produced from TiO2-modified Si3N4 powders10.1134/S0020168512090087 ↗
43. In situ formation of Si2 N2 O and TiN in Si3N4-based ceramic composites10.1016/j.actamat.2005.01.021 ↗
44. Densification, microstructure and properties of Si3N4 Ti (C, N) composites10.1016/0955-2219(93)90104-Y ↗
45. The fabrication of O'-siAlON ceramics by pressureless sintering10.1007/BF01174673 ↗
46. Effect of β- Si3N4 seeds on densification and fracture toughness of silicon nitride10.1016/j.ceramint.2005.02.015 ↗
47. Calloch · 2015
48. HSC
49. Richerson · 2005
50. Fabrication of a nano-Si3N4/Nano-C composite by high-energy ball milling and spark plasma sintering10.1111/j.1551-2916.2007.01593.x ↗
51. Fast bonding α-SiAlON ceramics by spark plasma sintering10.1016/j.jeurceramsoc.2010.05.009 ↗
52. Effect of high energy milling on the formation and properties of sialon ceramics prepared from silicon nitride-aluminium nitride precursors10.1016/j.ceramint.2012.11.006 ↗
53. Preparation and characterization of Si3N4/TiN nanocomposites ceramic tool materials10.1016/j.jmatprotec.2008.10.025 ↗