Friction behavior of polycrystalline diamond compact and the evolution of the friction film under different matching materials
Source abstract
Abstract
The friction and wear behavior of polycrystalline diamond compact (PDC) and the evolution of the friction film under nano‑molybdenum disulfide (MoS 2 ) lubricating additives after leaching cobalt were investigated under different friction pairs (SiC, ZrO 2, and Al 2O 3 ). The results showed that the friction coefficient and wear rate of different matching materials and PDC after leaching cobalt in a solid–liquid lubrication environment are related to the amount of friction film formed on the sliding interface, the evolution behavior, and the filling effect of lubricating additives on the friction interface. Different matching materials and PDC after leaching cobalt will undergo dissimilar chemical reactions during the sliding process, and different wear mechanisms are obtained.
Source: expertdata · Quality: candidate unverified · Source record ↗
References (47)
Show source-provided references
1. 3D hierarchical porous graphene nanosheets as an efficient grease additive to reduce wear and friction under heavy-load conditions10.1016/j.triboint.2019.106118 ↗
2. Imbalanced fault diagnosis of rolling bearing using enhanced generative adversarial networks10.1109/ACCESS.2020.3030058 ↗
3. Cutting performance of textured polycrystalline diamond tools with composite lyophilic/lyophobic wettabilities10.1016/j.jmatprotec.2018.04.049 ↗
4. Study on the tribological properties of diamond and SiC interactions using atomic scale numerical simulations10.1016/j.triboint.2022.108093 ↗
5. Polycrystalline diamond bearing testing for marine hydrokinetic application10.1016/j.wear.2012.11.068 ↗
6. Process-fluid-lubricated polycrystalline diamond bearings for application in marine hydrokinetic machines
7. Polycrystalline diamond as a potential material for the hard-on-hard bearing of Total hip prosthesis: Von Mises stress analysis10.3390/biomedicines11030951 ↗
8. Wear-in behaviour of polycrystalline diamond thrust bearings10.1016/j.wear.2010.12.059 ↗
9. Polycrystalline diamond thrust bearings for down-hole oil and gas drilling tools10.1016/j.wear.2009.01.016 ↗
10. Influence of frictional Interface state on Tribological performance of sintered polycrystalline diamond sliding against different mating materials10.1007/s11249-019-1196-1 ↗
11. Friction and wear behaviors of polycrystalline diamond under vacuum conditions10.1016/j.ijrmhm.2014.11.008 ↗
12. Macroscale superlubricity of Si-doped diamond-like carbon film enabled by graphene oxide as additives10.1016/j.carbon.2021.01.147 ↗
13. Controllable wear behaviors of silicon nitride sliding against sintered polycrystalline diamond via altering humidity10.1111/jace.15421 ↗
14. Microstructures and thermal damage mechanisms of sintered polycrystalline diamond compact annealing under ambient air and vacuum conditions10.1016/j.ijrmhm.2015.07.024 ↗
15. Improved vacuum tribological properties of sintered polycrystalline diamond compacts treated by high temperature annealing10.1016/j.carbon.2017.09.039 ↗
16. Thermal stability of polycrystalline diamond compact sintered with boron-coated diamond particles10.1016/j.diamond.2020.107753 ↗
17. Improvement of ambient temperature tribological properties of polycrystalline diamond compact treated by cobalt removal10.1016/j.diamond.2021.108567 ↗
18. High-temperature annealing of polycrystalline diamond compact with cobalt removal and evolution of tribological properties of grinding balls10.1016/j.diamond.2022.109073 ↗
19. PCD after cobalt leaching reinforced by high temperature annealing: Tribological properties and graphitization evolution10.1016/j.diamond.2022.108988 ↗
20. Metal-containing nanomaterials as lubricant additives: state-of-the-art and future development10.1007/s40544-019-0261-y ↗
21. Friction modifier additives10.1007/s11249-015-0589-z ↗
22. Self-lubricating composites containing MoS2: a review10.1016/j.triboint.2017.12.033 ↗
23. An investigation on the tribological properties of multilayer graphene and MoS2 nanosheets as additives used in hydraulic applications10.1016/j.triboint.2015.12.006 ↗
24. Tribofilm formation mechanism and friction behavior of polycrystalline diamond compact after cobalt leaching added molybdenum disulfide nanoparticles in different base oils10.1016/j.ijrmhm.2023.106101 ↗
25. Nanomolybdenum disulfide additive improves the tribological behavior of cobalt removal polycrystalline diamond compact10.1016/j.triboint.2022.107896 ↗
26. Rheological properties of engine oil with nano-additives based on MoS2 materials
27. Understanding electronic structures, chemical bonding, and fluxional behavior of Lu-2@C-2n (2n=76-88) by a theoretical study10.1063/5.0100652 ↗
28. Superlubricity for hydrogenated diamond like carbon induced by thin MoS2 and DLC layer in moist air10.1016/j.diamond.2019.107668 ↗
29. Preparation and tribological properties of MoS2-based multiple-layer structured films fabricated by electrohydrodynamic jet deposition10.1016/j.surfcoat.2020.125334 ↗
30. Influence of surface passivation on the friction and wear behavior of ultrananocrystalline diamond and tetrahedral amorphous carbon thin films10.1103/PhysRevB.85.155448 ↗
31. Microstructure and properties of Si-C-N nanocomposite films on titanium substrate
32. Tribological performance and lubrication mechanism of alumina nanoparticle water-based suspensions in ball-on-three-plate testing10.1007/s11249-017-0823-y ↗
33. Mechanisms and improvements in the friction and wear behavior using MoS2 nanotubes as potential oil additives10.1016/j.wear.2012.01.011 ↗
34. Self-lubricating composites containing MoS2: a review10.1016/j.triboint.2017.12.033 ↗
35. Solid lubrication with MoS2: a review10.3390/lubricants7070057 ↗
36. Lubrication performance of MoS2 and SiO2 nanoparticles as lubricant additives in magnesium alloy-steel contacts10.1016/j.triboint.2015.08.009 ↗
37. Effect of normal loads and mating pairs on the tribological properties of diamond-like carbon film
38. Durable superlubricity of hydrogenated diamond-like carbon film against different friction pairs depending on their interfacial interaction10.1016/j.apsusc.2021.150023 ↗
39. A comparative study of tribological characteristics of hydrogenated DLC film sliding against ceramic mating materials for helium applications10.1016/j.apsusc.2018.01.206 ↗
40. The effect of geometrical parameters, roughness and the number of nanoparticles on the self-diffusion coefficient in Couette flow in a nanochannel by using of molecular dynamics simulation10.1016/j.physb.2017.05.014 ↗
41. Operando tribochemical formation of onion-like-carbon leads to macroscale superlubricity10.1038/s41467-018-03549-6 ↗
42. Interaction of a system of cracks with an interface crack in functionally graded/homogeneous bimaterials under thermo-mechanical loading10.1016/j.commatsci.2012.04.032 ↗
43. Mechanical behavior of cu-W interface systems upon tensile loading from molecular dynamics simulations10.1016/j.commatsci.2018.05.030 ↗
44. Roles of nanomaterials at the rubbing interface of mechanical systems
45. MoS2 nanolayer coated carbon spheres as an oil additive for enhanced tribological performance10.1016/j.carbon.2016.09.047 ↗
46. Effects of Al on microstructure and tensile properties of C-bearing high Mn TWIP steel10.1016/j.actamat.2011.12.004 ↗
47. Grain refinement of AZ31 magnesium alloy by new Al-Ti-C master alloys10.1016/S1003-6326(08)60406-9 ↗