journal article·2022-12

Hot isostatic pressing of WB4 and WB4-TaB2 based ultrahard materials

Jazmina Navarrete-Cuadrado, Tomas Soria-Biurrun, Lorena Lozada-Cabezas, Steven Moseley, Patricia Alveen, Nerea Gonzalez-Polvorosa, Jose M. Tarragó, Jose M. Sanchez-Moreno

Publisher page

Abstract

Ultrahard WB4-B and WB4-TaB2 based materials have been obtained by applying glass encapsulated HIPing to mixtures comprised of WB4 and free boron with and without metallic tantalum additions. Porosity removal is more efficient in the alloy containing metallic tantalum, achieving near full density at temperatures 300 ? lower than those reported so far for these materials. The WB4 phase is better stabilished by HIPing at 1350 ? than at 1100 ?. This is due to the formation of TaB2, which, at 1100 ?, likely occurs by direct reaction between metallic Ta and the surrounding WB4 particles. At 1350 ?, diffusion is enhanced and the reaction between free B and Ta particles becomes more probable. The hardness of hipped specimens ranges from 43 GPa to 24 GPa depending on the applied load. K-1c values calculated from indentation cracks reach 5.6 MPa.m(1/2), assuming Palmqvist type crack shape.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Designing superhard materials10.1126/science.1109830 ↗
2. Correlation between hardness and elastic moduli of the ultraincompressible transition metal diborides RuB2, OsB2, and ReB210.1063/1.2946665 ↗
3. Electronic and structural origin of ultra-compressibility of 5d transition metal diborides MB2 (M=W, re, Os)10.1103/PhysRevLett.100.196403 ↗
4. Transition metal borides: superhard versus ultra-incompressible10.1002/adma.200703025 ↗
5. Preparation and properties of metallic, superhard rhenium diboride crystals10.1021/ja804989q ↗
6. Wear of synthetic diamond when grinding ferrous metals10.1038/255211a0 ↗
7. Some physical properties of the higher borides of molybdenum and tungsten10.1016/0022-5088(79)90012-2 ↗
8. Boride-based hard materials
9. Tungsten tetraboride, an inexpensive superhard material10.1073/pnas.1102636108 ↗
10. Extrinsic hardening of superhard tungsten tetraboride alloys with group 4 transition metals10.1021/jacs.6b02676 ↗
11. Effect of tantalum on phase transition and thermal stability of metastable tungsten tetra-boride10.1016/j.ceramint.2020.03.294 ↗
12. In situ synthesis, mechanical properties, and microstructure of reactively hot pressed WB4 ceramic with Ni as a sintering additive10.1016/j.ceramint.2018.07.181 ↗
13. Enhancing the hardness of superhard transition-metal borides: molybdenum-doped tungsten tetraboride10.1021/acs.chemmater.5b04410 ↗
14. Mechanochemical synthesis and annealing of tungsten di- and tetra-boride10.1111/jace.16788 ↗
15. Formation process of tungsten borides by solid state reaction between tungsten and amorphous boron10.1007/BF01086475 ↗
16. Effects of variable boron concentration on the properties of surperhard tungsten tetraboride10.1021/jacs.7b08706 ↗
17. The B-Cr (boron-chromium) system10.1007/BF02868996 ↗
18. Critical assessment and thermodynamic calculation of the binary system boron-tungsten (B-W)10.1007/BF02664852 ↗
19. Beitrag zum Aufbau der Syteme Niob-Bor und Tantal-Bor
20. HIP of Si3N4 and Si3N4+1 w/o Y2O3 to full density10.1007/BF00725890 ↗
21. Preparation and properties of massive amorphous elemental boron
22. Solubility of tungsten in zirconium diboride solid solution10.1016/j.jeurceramsoc.2016.11.039 ↗
23. Barin · 1995 · 1591
24. Synthesis and sintering of tungsten tetraboride and tantalum-bearing tungsten tetraboride under ultra high temperature and high pressure10.1016/j.ijrmhm.2021.105701 ↗
25. Preparation of NbB2, TaB and TaB2 single crystals using molten Aluminum flux
26. Synthesis of chromium borides by solid-state reaction between chromium oxide (III) and amorphous boron powders10.2109/jcersj.106.931 ↗
27. Examination of the indentation size effect in low-load Vickers hardness testing of ceramics10.1016/S0955-2219(99)00043-6 ↗
28. A critical evaluation of indentation techniques for measuring fracture toughness: II, strength method10.1111/j.1151-2916.1981.tb10321.x ↗
29. Indentation fracture of WC-co cermets10.1007/BF00555296 ↗
30. Effects of temperature and pressure on the mechanical and thermodynamic properties of high-boride WB4 from first-principles predictions