The effect of Ni doping on the mechanical behavior of tungsten
Source abstract
Abstract
Abstract The effect of nickel (Ni) on activated sintering of tungsten has been known and investigated for decades. However, there are few reports on the mechanical properties of tungsten when Ni is added as a low alloying additive with less than 1 wt%. In this research, the mechanical behaviors of tungsten doped with 0.2–1.0 wt% nickel from room temperature up to 400 °C were investigated. The results show that the compression ductility of as-sintered Ni doped tungsten is drastically higher than that of as-sintered pure tungsten at all tested temperatures including room temperature, and the fracture toughness at room temperature is increased by 92%. The results suggest that the ductile-to-brittle transition temperature (DBTT) of tungsten can be reduced substantially by doping with Ni.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Mechanisms of deformation and ductility in tungsten – a review10.1016/j.ijrmhm.2018.04.021 ↗
2. Methods for improving ductility of tungsten - a review10.1016/j.ijrmhm.2018.04.012 ↗
3. An investigation of the microstructure and ductility of annealed cold-rolled tungsten10.1016/j.actamat.2018.10.002 ↗
4. German · 1996 · 202
5. Rearrangement densification in liquid-phase sintering10.1007/s11661-001-0187-6 ↗
6. Equilibrium states of liquid, solid, and vapor and the configurations for copper, tungsten, and pores in liquid-phase sintering10.1007/s11663-010-9460-7 ↗
7. Thin intergranular films and solid-state activated sintering in nickel-doped tungsten10.1016/j.actamat.2007.01.017 ↗
8. The effect of ni contents on the activated sintering of sub-micron tungsten powder compact
9. High temperature compressive deformation and fracture characteristics of the activated sintered W–Ni compacts10.1016/S0263-4368(03)00031-3 ↗
10. On the workability of activated sintered tungsten powder compact
11. Production of nanometric tungsten carbide powders by planetary milling
12. Sinter-ability of nanocrystalline tungsten powder10.1016/j.ijrmhm.2009.11.003 ↗
13. The study on low temperature sintering of nano-tungsten powders10.1016/j.ijrmhm.2016.10.003 ↗
14. Compliance and stress-intensity factor of Chevron-notched three-point bend specimen
15. Microstructure and mechanical properties at different length scales and strain rates of nanocrystalline tantalum produced by high-pressure torsion10.1016/j.actamat.2010.12.042 ↗
16. Fabrication of W–1wt.% TiC composites by spark plasma sintering10.1016/j.fusengdes.2015.01.003 ↗
17. Deng · 2002
18. Microstructure, basic thermal–mechanical and Charpy impact properties of W-0.1 wt.% TiC alloy via chemical method10.1016/j.jallcom.2015.11.088 ↗
19. Synthesis, sintering, and mechanical properties of nanocrystalline cemented tungsten carbide – a review10.1016/j.ijrmhm.2008.07.011 ↗
20. Different effects of Cr3C2 and VC on the sintering behavior of WC–co materials10.1016/j.ijrmhm.2015.07.004 ↗
21. Coarsening, densification, and grain growth during sintering of nano-sized powders—a perspective10.1016/j.ijrmhm.2016.09.004 ↗
22. Interface debonding and fiber cracking in brittle matrix composites10.1111/j.1151-2916.1989.tb06079.x ↗
23. Crack growth along bimaterial interfaces
24. Effects of purity and structure on recrystallization, grain growth, ductility, tensile, and creep properties of arc-melted tungsten
25. Grain boundary self and impurity diffusion in tungsten in the temperature range of activated sintering
26. Site competition effect of impurities and grain boundary stability in iron and tungsten10.1016/0956-716X(93)90589-K ↗
27. Lassner · 1999 · 233
28. An analysis of the influence of grain boundary strength on microstructure dependent fracture in polycrystalline tungsten10.1007/s10704-016-0083-0 ↗