Interfacial structures and mechanical properties of a high entropy alloy-diamond composite
Source abstract
Abstract
Abstract A FeCoCrNiMo high-entropy alloy (HEA)/diamond composite prepared by spark plasma sintering (SPS) was investigated. Sintering the HEA/diamond composites at different temperatures leads to different interfacial structures, which have an impact on the mechanical properties. The multiple microstructures at HEA/diamond interface have different effects on the retention of the HEA matrix on diamond particles. It was found that the interstitial strengthening effect, amorphous carbon and nano-scale ordered carbon complex were beneficial to the mechanical properties. Due to the good interfacial bonding strength between the HEA matrix and un-failed diamond particles, the composite sintered at 950 °C exhibited an optimized combination of mechanical properties, with a hardness of 630 HV, transverse rupture strength of 1310 MPa, and optimal wear resistance. The failure of the diamond particles and the formation of brittle chromium carbides at sintering temperature at 1000 °C can deteriorate the properties of HEA/diamond composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Ultra-precision cutting of single crystal silicon using diamond tool with large top corner radius [J]10.4028/www.scientific.net/KEM.523-524.81 ↗
2. Wear inspection of a single-crystal diamond tool used in electroless nickel turning [J]10.1117/1.OE.53.3.034102 ↗
3. Effect of Fe-based pre-alloyed powder on the microstructure and holding strength of impregnated diamond bit matrix [J]10.1016/j.ijrmhm.2018.11.015 ↗
4. Fabrication of Fe–Cu matrix diamond composite by microwave hot pressing sintering[J]10.1016/j.powtec.2018.06.043 ↗
5. Diamond retention in sintered cobalt bonds for stone cutting and drilling [J]10.1016/S0925-9635(99)00167-3 ↗
6. Fabrication of monolayer brazed diamond tools with optimum grain distribution[J]10.4028/www.scientific.net/KEM.259-260.6 ↗
7. Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys[J]10.1016/j.actamat.2011.06.041 ↗
8. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys [J]10.1016/j.intermet.2011.01.004 ↗
9. Microstructures and properties of high-entropy alloys [J]10.1016/j.pmatsci.2013.10.001 ↗
10. Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys [J]10.1016/j.actamat.2012.06.046 ↗
11. An AlNbTiVZr0.5 high-entropy alloy combining high specific strength and good ductility [J]10.1016/j.matlet.2015.08.099 ↗
12. Fabrication and characterization of WC-AlCoCrCuFeNi high-entropy alloy composites by spark plasma sintering10.1016/j.jallcom.2018.04.270 ↗
13. Microstructures and wear behaviour of (FeCoCrNi)1-x(WC)x high entropy alloy composites10.1016/j.ijrmhm.2018.03.019 ↗
14. Oxide-fibre/high-entropy-alloy-matrix composites10.1016/j.compositesa.2015.05.023 ↗
15. High entropy alloy FeCoNiCu matrix composites reinforced with in-situ TiC particles and graphite whiskers
16. A novel high-entropy alloy-based composite material10.1016/j.jallcom.2017.09.274 ↗
17. Thermal stability and grain boundary strengthening in ultrafine-grained CoCrFeNi high entropy alloy composite10.1016/j.matdes.2017.08.053 ↗
18. Deformation twins and interface characteristics of nano-Al2O3 reinforced Al0.4FeCrCo1.5NiTi0.3 high entropy alloy composites10.1016/j.matchemphys.2017.11.037 ↗
19. The microstructure and properties of (FeCrNiCo)AlxCuy high-entropy alloys and their TiC-reinforced composites [J]10.1016/j.msea.2014.01.044 ↗
20. New TiC/Co1.5CrFeNi1.5Ti0.5 cermet with slow TiC coarsening during sintering[J]10.1007/s11837-014-1095-8 ↗
21. Novel cermet material of WC/multi-element alloy [J]10.1016/j.ijrmhm.2013.11.005 ↗
22. Fabrication and properties of TiB2-based cermets by spark plasma sintering with CoCrFeNiTiAl high-entropy alloy as sintering aid [J]10.1016/j.jeurceramsoc.2014.10.024 ↗
23. Research for the high entropy alloys bond of diamond abrasive tools[D]
24. Microstructures and mechanical properties of extruded 2024 aluminum alloy reinforced by FeNiCrCoAl3 particles [J]10.1016/S1003-6326(14)63358-6 ↗
25. Performances of hybrid high-entropy high-Cr cast irons during sliding wear and air-jet solid-particle erosion [J]10.1016/j.wear.2012.12.045 ↗
26. A fracture-resistant high-entropy alloy for cryogenic applications [J]10.1126/science.1254581 ↗
27. Ductile CoCrFeNiMo x high entropy alloys strengthened by hard intermetallic phases [J]10.1016/j.actamat.2016.06.063 ↗
28. Composition design of high entropy alloys using the valence electron concentration to balance strength and ductility [J]10.1016/j.actamat.2017.10.058 ↗
29. Nano-structured high entropy alloys with multiple principal elements: novel alloy design concepts and outcomes [J]10.1002/adem.200300567 ↗
30. A new generation solution model for predicting thermodynamic properties of a multicomponent system from binaries [J]10.1007/s11663-997-0110-7 ↗
31. Binnewies · 2002
32. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element [J]10.2320/matertrans.46.2817 ↗
33. Ion-beam deposition of thin films of diamondlike carbon [J]10.1063/1.1660654 ↗
34. Tribology of diamond-like carbon sliding against itself, silicon nitride, and steel [J]10.1557/JMR.1995.1403 ↗
35. Probing the stress reduction mechanism of diamond-like carbon films by incorporating Ti, Cr, or W carbide-forming metals: Ab initio molecular dynamics simulation [J]10.1021/acs.jpcc.5b00058 ↗
36. Enhanced tribocorrosion performance of Cr/GLC multilayered films for marine protective application [J]10.1021/acsami.8b00628 ↗
37. The effect of interstitial carbon on the mechanical properties and dislocation substructure evolution in Fe40.4Ni11.3Mn34.8Al7.5Cr6 high entropy alloys [J]10.1016/j.actamat.2016.08.072 ↗
38. Effect of thermomechanical processing on microstructure and mechanical properties of the carbon-containing CoCrFeNiMn high entropy alloy10.1016/j.jallcom.2016.09.208 ↗
39. Enhanced strength and ductility in a high-entropy alloy via orderedoxygen complexes10.1038/s41586-018-0685-y ↗