Effect of B2O3 on physical properties of LZAS vitrified bond and mechanical properties of diamond composites
Source abstract
Abstract
Abstract The properties of vitrified bond abrasive tools, which are composed of diamond grains and Li2O–ZnO–Al2O3–SiO2 (LZAS) vitrified bond with and without B2O3 were comprehensively investigated. The results show that the vitrified bond incorporating 10 mol% B2O3 exhibits a lower refractoriness and a higher fluidity compared with that of vitrified bond without B2O3. Moreover, the thermal expansion coefficient (TEC) of vitrified bond containing 10 mol% B2O3 is very close to the TEC of diamond grains. Meanwhile, the open porosity of diamond composite is decreased from 41% to 29% by incorporating 10 mol% B2O3, which was 28.5% lower than that of vitrified bond without B2O3. The bending strength and Rockwell hardness of the diamond composite are significantly improved when the content of B2O3 reached 10 mol%. SEM observation revealed that the diamond grains were closely overlaid by vitrified bond and diamond composite containing 10 mol% B2O3 exhibited a relatively denser structure. The relation between the structural change and compositional variation by introducing B2O3 was analyzed by Fourier transform infrared spectroscopy (FTIR).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. A study on the toughening of bond bridge of Ni–Cu–Sn alloy-development of porous metal bonded diamond wheel10.2493/jjspe.64.923 ↗
2. Trends and recent developments in the material manufacture and cutting tool application of polycrystalline diamond and polycrystalline cubic boron nitride10.1016/S0263-4368(00)00015-9 ↗
3. Influence of cutting conditions on machinability aspects of PEEK, PEEK CF 30 and PEEK GF 30 composites using PCD tools10.1016/j.jmatprotec.2008.04.060 ↗
4. A ceramic aspect of vitrified bond for diamond grinding wheel
5. Effects of brazing route and brazing alloy on the interfacial structure between diamond and bonding matrix10.1016/S0254-0584(03)00328-6 ↗
6. High-performance grinding—a review10.1016/j.jmatprotec.2005.04.010 ↗
7. Sintering and vitrification heat treatment of CBN grinding wheels10.1016/j.jmatprotec.2007.03.010 ↗
8. Sintering parameters and wear performances of vitrified bond diamond grinding wheels10.1016/j.ijrmhm.2005.11.002 ↗
9. The effect of bond composition on the strength of partially-bonded vitrified ceramic abrasives10.1007/BF00270963 ↗
10. Effect of glass composition on the strength of vitreous bonded CBN grinding wheels10.1016/0272-8842(93)90080-B ↗
11. Materials selection applied to vitrified alumina & CBN grinding wheels10.1016/S0924-0136(00)00829-3 ↗
12. Microscale wear of vitrified abrasive materials10.1023/B:JMSC.0000017776.67999.86 ↗
13. Thermal expansion of Li2O–ZnO–Al2O3–SiO2 glasses and corresponding glass-ceramics10.1007/BF01113882 ↗
14. Effect of Al2O3 additions on the crystallization behaviour and bending strength of a Li2O–ZnO–SiO2 glass-ceramic10.1016/S0272-8842(00)00048-1 ↗
15. Effect of Al2O3 additions on the acid durability of a Li2O–ZnO–SiO2 glass and its glass-ceramic10.1016/S0272-8842(02)00188-8 ↗
16. Effect of Al2O3 additions on the thermal expansion behavior of a Li2O–ZnO–SiO2 glass-ceramic10.1111/j.1151-2916.1999.tb02289.x ↗
17. Effects of B2O3 addition on the microstructure and microwave dielectric properties of La4Ba2Ti5O1810.1016/j.jallcom.2007.10.124 ↗
18. Effect of B2O3 addition on the thermal properties and density of barium phosphate glasses10.1016/j.jnoncrysol.2005.11.066 ↗
19. Effect of boron addition on the structure and properties of iron phosphate glasses10.1016/j.jnoncrysol.2010.11.023 ↗
20. Glass fibers
21. Glass-ceramics
22. Effect of polycrystalline mullite fibers on the properties of vitrified bond and vitrified CBN composites10.1016/j.ceramint.2012.09.059 ↗
23. Thermal expansion of alumino-alkalisilicate and alumino-borosilicate glasses—comparison of empirical models10.1023/A:1018566606548 ↗
24. Silicate, borosilicate, and borate bioactive glass scaffolds with controllable degradation rate for bone tissue engineering applications. I. Preparation and in vitro degradation10.1002/jbm.a.32824 ↗
25. Mechanisms in the generation of grinding wheel topography by dressing10.1007/s11740-008-0101-9 ↗
26. Porous fine CBN stones for high removal rate superfinishing10.1016/S0007-8506(07)62328-2 ↗
27. Development and application of porous vitrified-bonded wheel with ultra-fine diamond abrasives10.4028/www.scientific.net/KEM.257-258.251 ↗
28. Crystallization and microstructural evolution of cordierite-based thick film dielectrics10.1016/S1359-6454(98)00307-3 ↗
29. Effect of the substitution of M2O3 (M=La, Y, In, Ga, Al) for CaO on the bioactivity of 2.5CaO×2SiO2 glass10.1016/S0142-9612(01)00173-9 ↗
30. Raman spectra of soda–lime–silicate glass doped with rare earth10.1016/j.physb.2011.07.014 ↗
31. Raman spectral studies of borate glasses10.1016/0022-3093(93)91277-A ↗
32. Structural aspects of vitreous PbO·2B2O3 studied by Raman scattering10.1111/j.1151-2916.1976.tb09526.x ↗
33. Studies on thermal and structural properties of glasses as sealants for solid oxide fuel cells10.1016/j.ijhydene.2007.07.049 ↗
34. Kan · 1991
35. Effect of ZnO on the interfacial bonding between Na2O–B2O3–SiO2 vitrified bond and diamond10.1016/j.solidstatesciences.2009.04.026 ↗
36. Vibrational spectra of magnesium–sodium–borate glasses. 2. Raman and mid-infrared investigation of the network structure10.1021/j100289a014 ↗
37. Dielectric and structural investigation of alkali triborate glasses10.1016/S0022-3093(98)00519-5 ↗
38. Infrared absorption spectra on the structure of titanium barium borosilicate glasses