journal article·2021-12

Effect of various combinations of Ti and Zr interlayers on the tensile properties of laser welded joints of molybdenum

Liang-Liang Zhang, Lin-Jie Zhang, Jie Ning, Suck-Joo Na

Publisher page

Abstract

Abstract Molybdenum (Mo) is of great potential in the nuclear energy field, however, the embrittlement and the lower tensile strength limit the application of the fusion welded joints. Titanium (Ti) and zirconium (Zr) were synchronously added into the fusion zone (FZ) to improve the tensile strength and certain ductility of laser beam welding joints. By utilizing high-resolution scanning electron microscopy (SEM), electron backscatter diffraction (EBSD) and nanoindentation, the microstructures and mechanical properties of FZs in the joints under different alloying strategies with Ti and Zr were analyzed. Zr is mainly present in Mo as Mo2Zr, playing the second-phase strengthening effect; Ti is mainly present in Mo in an atomic state, playing a role of the solid - solution strengthening. The addition of Ti and Zr with different mass proportions can control the relative contents of Mo2Zr phase and solid - solution atoms in the FZ, control the distribution of zigzag and flat grain boundaries and influence the relative distributions of low - angle grain boundaries (LAGBs) and high - angle grain boundaries (HAGBs). In the end, combined addition of Ti and Zr is possible to improve the tensile strength while decrease the loss of ductility of the joint.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. A review of refractory metal alloys and mechanically alloyed-oxide dispersion strengthened steels for space nuclear power systems10.1016/j.jnucmat.2004.10.118 ↗
2. Weldability of molybdenum and its alloy sheet (report I) (materials, metallurgy, weldability)
3. Weldability of molybdenum and its alloy sheet (report II): ductility of EB and GTA welds (materials, metallurgy, weldability)
4. Intrinsic intergranular brittleness of molybdenum10.1016/0036-9748(81)90038-7 ↗
5. Grain boundary segregation in recrystallized molybdenum alloys and its effect on brittle intergranular fracture10.1016/0263-4368(92)90060-F ↗
6. Computational study of metallic dopant segregation and embrittlement at molybdenum grain boundaries10.1016/j.actamat.2016.07.005 ↗
7. Effect of oxygen on the intergranular brittlement of molybdenum10.2320/jinstmet1952.48.1_25 ↗
8. Effects of titanium on grain boundary strength in molybdenum laser weld bead and formation and strengthening mechanisms of brazing layer10.1016/j.matdes.2019.107681 ↗
9. Laser seal welding of end plug to thin-walled nanostructured high-strength molybdenum alloy cladding with a zirconium interlayer10.1016/j.jmatprotec.2018.12.028 ↗
10. Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility10.1038/nmat3544 ↗
11. The control of brittleness and development of desirable mechanical properties in polycrystalline systems by grain boundary engineering10.1016/S1359-6454(99)00275-X ↗
12. Thermodynamic assessment of the Mo-Zr system10.1361/1054971023604242 ↗
13. Effects of alloying elements on the workability and ductility of interstitial-free molybdenum10.2320/matertrans1960.25.401 ↗
14. Alloying to improve the properties of welded molybdenum10.1016/0022-3115(88)90275-9 ↗
15. 庄育智, 唐全红, 庄祥麟, 钼-钛-锆与钼-铌-锆两三元系平衡图中1200°C恒溫截面的研究, 金属学报 9 (1966) 63–124.
16. Improvement in the weldability of molybdenum alloy by pre-welding solid carburising10.1016/j.jmst.2020.06.056 ↗
17. Thermodynamic assessment of the Ti-Zr system and calculation of the Nb-Ti-Zr phase diagram10.1016/0925-8388(94)90019-1 ↗
18. Experimental investigation of the Mo–Ti–Zr ternary phase diagrams10.1007/s11669-018-0668-6 ↗
19. Thermodynamic description and phase selection for the Mo–Ti–Zr biomedical alloys10.1016/j.calphad.2020.101799 ↗