journal article·2026-09

Microstructural evolution and property variation of Nb-Ti-Si-Cr-Ta alloys regulated by tantalum content

Anni Li, Xiping Guo

Publisher page

Abstract

Five multi-component Nb-Si based ultrahigh temperature alloys with different Ta contents (0, 1, 2, 4, and 8 at.%) were prepared via vacuum non-consumable arc melting. The effects of Ta content on the microstructure, nanoindentation hardness, room-temperature fracture toughness, compressive strength at 1250 °C, and oxidation resistance at 1250 °C of the alloys were systematically investigated. The results indicate that the alloys containing 0 and 1 at.% Ta consist of primary γ(Nb,X)5Si3 and Nbss/γ(Nb,X)5Si3 eutectic structure. By contrast, the alloys with 2, 4, and 8 at.% Ta feature a multi-phase microstructure composed of primary γ(Nb,X)5Si3, primary α(Nb,X)5Si3, and Nbss/γ(Nb,X)5Si3 eutectic structure. Ta addition suppresses the formation of γ(Nb,X)5Si3, while promoting the formation of α(Nb,X)5Si3. The solid solution strengthening effect derived from Ta addition enhances the nanoindentation hardness of Nbss and primary α(Nb,X)5Si3 blocks, and also improves the compressive strength at 1250 °C of the alloys. The alloy with 2 at.% Ta exhibits the optimal compressive strength of 419.7 MPa. For alloys with higher Ta contents (4 and 8 at.%), a continuous Ta2O5 layer impregnated with amorphous silicates is formed in the outer layer of the oxide scales during oxidation, which reduces the number of oxygen diffusion pathways and hinders the inward diffusion of oxygen, thereby effectively improving the oxidation resistance of the alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Effect of Co on microstructures and mechanical properties for Nb-Si based in-situ composites10.1016/j.matchar.2021.111563 ↗
2. Cooperative effects of Mo and B additions on the microstructure and mechanical properties of multi-elemental Nb-Si-Ti based alloys10.1016/j.matchar.2023.113421 ↗
3. Predefined attention-focused mechanism using center-environment features: a machine learning study of alloying effects on the stability of Nb5Si3 alloys
4. Effects of Co addition on the microstructure and properties of multi-elemental Nb-Si based ultrahigh temperature alloys10.1016/j.ijrmhm.2026.107732 ↗
5. Progress in Nb-Si ultra-high temperature structural materials: a review10.1016/j.jmst.2022.11.022 ↗
6. Effect of Zr and Ti on isothermal oxidation behavior of Nb-Si based alloys10.1016/j.pnsc.2022.02.004 ↗
7. Effect of Zr and Hf additions on microstructure and mechanical properties of Nb-Si based ultrahigh temperature alloys10.1016/j.jmrt.2020.11.013 ↗
8. Balancing the fracture toughness and tensile strength by multiple additions of Zr and Y in Nb-Si based alloys10.1016/j.intermet.2021.107172 ↗
9. Effect of Zr additions on microstructure evolution and phase formation of Nb-Si based ultrahigh temperature alloys10.1016/j.intermet.2018.07.010 ↗
10. Microstructures and properties of Nb-Si-based alloys with B addition10.1007/s12598-018-1195-7 ↗
11. Oxidation behavior of Nb-24Ti-18Si-2Al-2Hf-4Cr and Nb-24Ti-18Si-2Al-2Hf-8Cr hypereutectic alloys at 1250 ℃10.1007/s12598-015-0600-8 ↗
12. Study of the effects of Zr addition on the microstructure and properties of Nb-Ti-Si based ultrahigh temperature alloys10.1016/j.intermet.2017.04.008 ↗
13. Effect of the Al, Cr and B elements on the mechanical properties and oxidation resistance of Nb-Si based alloys: a review10.1007/s00339-021-05013-7 ↗
14. Er-induced microstructural refinement and internal oxidation enhancing fracture toughness in Nb-Si alloys10.1016/j.jallcom.2025.184777 ↗
15. Microstructure and fracture toughness of Nb-Si based alloys with Ta and W additions10.1016/j.intermet.2017.09.005 ↗
16. High-temperature oxidation behavior of Nb-Si-based alloy with separate vanadium, tantalum, tungsten and zirconium addition10.1007/s12598-017-0916-7 ↗
17. Microstructure and mechanical properties of Nb-Si alloy with addition of Mn10.1016/j.jmrt.2022.07.084 ↗
18. Alloying effects on the microstructure and properties of Nb-Si based ultrahigh temperature alloys10.1016/j.intermet.2015.12.002 ↗
19. Cooperative effects of Mo, V and Zr additions on the microstructure and properties of multi-elemental Nb-Si based alloys10.1016/j.jmst.2022.06.006 ↗
20. Effect of Ti addition on microstructure and crystalline orientations of directionally solidified Nb-Si based alloys10.1016/j.intermet.2020.106798 ↗
21. Experimental investigation of phase equilibria in the Co-Ta-Si ternary system10.3390/ma15093097 ↗
22. Effect of heat treatment on nanoparticle reinforced Nb-18.7Si alloy10.1016/j.ijrmhm.2025.107170 ↗
23. Experimental investigation of phase equilibria in the Nb-Si-Ta ternary system10.3139/146.111442 ↗
24. Thermodynamic assessment of the Nb-Si-Ta system10.1007/s11669-017-0596-x ↗
25. The mixed intermetallic silicide Nb5-xTaxSi3 (0 ⩽ x ⩽ 5). Crystal and electronic structure10.1016/j.jallcom.2013.09.078 ↗
26. Strength and ductile-phase toughening in the two-phase Nb/Nb5Si3 alloys10.1007/BF02667370 ↗
27. An electron work function based mechanism for solid solution hardening10.1016/j.jallcom.2017.12.065 ↗
28. The impact of Ti and temperature on the stability of Nb5Si3 phases: a first-principles study10.1080/14686996.2017.1341802 ↗
29. Effects of B and Si on the fracture toughness of the Nb-Si alloys10.1016/j.intermet.2014.06.005 ↗
30. Formation of nano-precipitation and dislocation behaviors in dual-phase Nb-Si superalloys
31. Effect of Ta on the microstructure and mechanical properties of W-Ta alloys prepared by arc melting10.1016/j.matchar.2022.111823 ↗
32. Effect of the Ta addition on densification and mechanical properties of NbTi alloys prepared by SPS10.1016/j.jallcom.2021.159106 ↗
33. Effect of Al, Cr and Ta additions on the oxidation behaviour of Nb-Ti-Si in situ composites at 800 ℃10.1016/j.msea.2005.10.017 ↗
34. Improvement in the oxidation resistance of Nb-Si-Ti based alloys containing zirconium10.1016/j.corsci.2019.108294 ↗
35. Effects of B addition on the microstructure and properties of Nb silicide based ultrahigh temperature alloys10.1016/j.intermet.2014.10.007 ↗
36. Pilling-Bedworth ratio for oxidation of alloys10.1007/s100190050008 ↗
37. Oxidation mechanisms of niobium, tantalum, molybdenum and tungsten10.1016/0022-5088(60)90012-6 ↗