Molybdenum-Rhenium alloy: A focused review of strengthening-toughening mechanism and method
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Methods for improving ductility of tungsten - A review[J]10.1016/j.ijrmhm.2018.04.012 ↗
2. A review of refractory metal alloys and mechanically alloyed-oxide dispersion strengthened steels for space nuclear power systems[J]10.1016/j.jnucmat.2004.10.118 ↗
3. Recent advances in aerospace refractory metal alloys[J]10.1179/imr.1988.33.1.131 ↗
4. The effect of rhenium on some properties of molybdenum alloys as fusion reactor material[J]10.1016/0022-3115(79)90374-X ↗
5. Embrittlement of molybdenum–rhenium welds under low and high temperature neutron irradiation[J]10.1016/j.jnucmat.2013.10.027 ↗
6. Rhenium chemistry – then and now[J]10.1016/j.ccr.2021.213822 ↗
7. The low-temperature mechanical behavior of molybdenum-rhenium[J]10.1007/s11837-003-0171-2 ↗
8. Alloy hardening and softening in binary molybdenum alloys as related to electron concentration[J]10.1016/0022-5088(72)90201-9 ↗
9. Solution softening mechanism of iridium and rhenium in tungsten at room temperature[J]10.1016/0263-4368(91)90028-M ↗
10. Mechanical properties of electron-beam-melted molybdenum and dilute Mo-Re alloys[J]10.1007/BF02665440 ↗
11. Alloying to improve the properties of welded molybdenum[J]10.1016/0022-3115(88)90275-9 ↗
12. Effect of rhenium addition on fracture toughness of tungsten at elevated temperatures[J]10.1007/BF00356341 ↗
13. Refractory materials likely to be used in the NET divertor armour[J]10.1016/0263-4368(91)90010-L ↗
14. Microstructural development and radiation hardening of neutron irradiated Mo–Re alloys[J]10.1016/j.jnucmat.2003.09.007 ↗
15. Mechanical properties of ternary molybdenum–rhenium alloys at room temperature and 1700 K[J]10.1016/j.scriptamat.2008.02.057 ↗
16. Manufacturing of Mo-25 Re and Mo-50 Re alloys by means of powder sintering at medium temperatures[J]10.1080/10426919808935295 ↗
17. Cold-forming mechanisms and work-hardening rate for Rhenium[J]10.1016/0263-4368(92)90088-J ↗
18. Research progress and development of strengthening-toughening methods for molybdenum alloys prepared by powder metallurgy[J]10.1016/j.jallcom.2024.177099 ↗
19. Surface radiation damage in molybdenum alloys[J]10.1016/0022-3115(82)90633-X ↗
20. Mechanical properties of Mo?Re alloys at different test temperatures[J]10.1007/BF00775741 ↗
21. Strength of a cold-worked Mo-Re alloy[J]10.1007/BF01532495 ↗
22. Plastic deformation of molybdenum-rhenium alloy crystals[J]10.1016/0001-6160(70)90132-X ↗
23. Ductility and impact resistance of powder-metallurgical molybdenum-rhenium alloys[J]10.1007/s11661-006-0177-9 ↗
24. Dilute Mo-Re alloys – A critical evaluation of their comparative mechanical properties[J]10.1016/0036-9748(86)90481-3 ↗
25. Concerning sigma-phase in molybdenum-rhenium alloys[J]10.1007/BF02645854 ↗
26. Technical note: the role of Re additions on the grain size and the microstructure of Mo[J]10.1007/BF02833111 ↗
27. Informa UK Limited, 2008. Brittle fracture in 50Mo–50Re alloys during slow strain rate tensile testing[J]10.1080/14786430802216366 ↗
28. Effects of strain rate on tensile properties of TZM and Mo–5%Re[J]10.1016/S0022-3115(02)01191-1 ↗
29. Microstructural and mechanical property changes with aging of Mo–41Re and Mo–47.5Re alloys[J]10.1016/j.jnucmat.2007.03.027 ↗
30. Effect of rhenium on the brittle fracture threshold of molybdenum[J]10.1007/BF00715883 ↗
31. Investigation of mechanical properties and microstructure of various molybdenum-rhenium alloys[C]
32. The tensile response of Mo, Mo–Re and Mo–Si solid solutions[J]10.1016/j.ijrmhm.2013.05.005 ↗
33. Radiation embrittlement of Mo–Re welds under low-temperature irradiation in the SM reactor[J]10.1016/S0022-3115(98)00386-9 ↗
34. A review of chromium, molybdenum, and tungsten alloys[J]10.1016/0022-5088(75)90046-6 ↗
35. Yielding and fracture in tungsten and tungsten-rhenium alloys[J]10.1016/0022-5088(69)90047-2 ↗
36. Alloy softening in group via metals alloyed with rhenium[J]10.1016/0022-5088(71)90043-9 ↗
37. Sha · 1999
38. On the nature of the rhenium effect. peculiarities of the band structure and elastic moduli of W- and Mo-based alloys[J]10.1002/pssb.2221640119 ↗
39. Atomistic simulation of the segregation profiles in Mo–Re random alloys[J]10.1016/j.susc.2003.07.001 ↗
40. Face-dependent segregation and relaxation in Mo0.75Re0.25 random alloy surfaces[J]10.1016/S0039-6028(99)00519-1 ↗
41. Deep layer oscillatory segregation and relaxation of substitutionally disordered MoxRe1−x(100) surfaces[J]10.1016/S0039-6028(96)01394-5 ↗
42. Application of chemical tensor LEED to MoxRe1−x(100) surfaces[J]10.1016/0039-6028(94)90432-4 ↗
43. Further statistical analysis of the composition of a grain boundary in a Mo(Re) alloy studied by atom-probe field-ion microscopy[J]10.1016/0956-716X(91)90235-S ↗
44. Anomalous strain-rate effect on plasticity of a Mo–Re alloy at room temperature[J]
45. Fragmented twins in Mo-35 at.% Re alloy[J]10.1016/0001-6160(75)90095-4 ↗
46. The niobium-rhenium system[J]10.1016/0022-5088(59)90065-7 ↗
47. Sintering and characterization of intermediate phases in the Mo-Re alloys[J]10.4028/www.scientific.net/KEM.189-191.394 ↗
48. Atom probe study of the segregation behaviour of molybdenum-rhenium alloys[J]10.1016/S0042-207X(98)00061-X ↗
49. Effects of neutron irradiation on physical and mechanical properties of Mo-Re alloys[J]
50. The influence of neutron irradiation in FFTF on the microstructural and microchemical development of Mo–41Re at 470–730°C[J]10.1016/j.jnucmat.2008.01.014 ↗
51. Radiation-induced strengthening in EB welds of Mo–Re alloys during high temperature neutron irradiation[J]10.1016/j.jnucmat.2010.12.183 ↗
52. Microstructure and mechanical behaviour of TZM and Mo-5% Re alloys irradiated with fission neutrons[J]10.1016/0022-3115(94)00697-0 ↗
53. Radiation-damage in molybdenum–rhenium alloys for space reactor applications[J]10.1016/j.jnucmat.2007.03.028 ↗
54. Diffusional and dislocation accommodation mechanisms in superplastic materials[J]10.1016/j.actamat.2020.07.042 ↗
55. Implement finite element method on the calibration coefficients of integral FIB-DIC ring-core residual stress measurement of thin films[J]10.1016/j.measurement.2024.116623 ↗
56. Understanding and removing FIB artifacts in metallic TEM samples using flash electropolishing[J]10.1016/j.jnucmat.2025.155618 ↗
57. 3D reconstruction and nanoscale simulation of boron/silicon modified phenolic matrix using FIB-SEM imaging and lattice Boltzmann models[J]10.1016/j.applthermaleng.2025.127472 ↗
58. Cryogenic sample preparation: Comparative analysis of Ga+ and Xe+ FIB milling for TEM and APT examination of zirconium[J]10.1016/j.ultramic.2025.114210 ↗
59. New dynamic FIB-SEM fusion model for controllable high-precision nanofabrication with high-energy synchronous FIB-SEM beams[J]10.1016/j.vacuum.2025.114547 ↗
60. Optimized dose modulation for controlled greyscale electron beam lithography for negative tone resist[J]10.1016/j.apsusc.2025.163638 ↗
61. Misalignment measurement in electron beam lithography from multi-scale grid by sampling Moiré method[J]10.1016/j.measurement.2025.117270 ↗
62. Optimizing and well-controlled grayscale electron beam lithography for planar dual-blazed grating fabrication[J]10.1016/j.vacuum.2025.114540 ↗
63. Characterization of negative tone photoresist mr-EBL 6000.5 for i-line stepper and electron beam lithography for the intra-level mix & match approach[J]10.1016/j.mne.2024.100264 ↗
64. Intra-level mix and match lithography with electron beam lithography and i-line stepper combined with resolution enhancement for structures below the CD-limit[J]10.1016/j.mne.2023.100189 ↗
65. Fast tilt compensation in non-raster rotation-scanning atomic force microscopy for improved force control and extended scanning range[J]10.1016/j.measurement.2025.117552 ↗
66. Investigation of machining characteristics near resonance based on a custom-built vibration platform for atomic force microscopy[J]10.1016/j.precisioneng.2025.07.006 ↗
67. Microscopic mechanisms of crosslinked isoprene rubber deformation behavior and strain-induced crystallization study by atomic force microscopy[J]10.1016/j.polymer.2025.128649 ↗
68. Orientation and strain dependence of dislocations in aluminum layer of Al/Mg/Al laminates: high-resolution EBSD analysis[J]10.1016/j.jallcom.2025.180483 ↗
69. An iterative method for reference pattern selection in high-resolution electron backscatter diffraction (HR-EBSD)[J]10.1016/j.ultramic.2023.113705 ↗
70. Improved high-resolution EBSD analyses by correcting radial distortion of electron diffraction patterns[J]10.1016/j.matchar.2022.112458 ↗
71. Limits of simulation based high resolution EBSD[J]10.1016/j.ultramic.2013.03.020 ↗
72. Evolution of precipitation in a duplex Fe-Mn-Al-C low-density steel revealed by in situ high-energy synchrotron X-ray diffraction[J]
73. Micro-focused X-ray diffraction imaging analysis of Fe nitrides and carbides in the compound layer of nitrocarburized and gas nitrided steel surfaces[J]
74. Crystallographic and morphological characterization of high-crystalline α-alumina nanoparticles: a comprehensive X-ray diffraction and transmission electron microscopy study[J]10.1016/j.cplett.2025.142245 ↗
75. Triple crystal high resolution x-ray diffraction setup based on adaptive bending X-ray optics (ABXO) elements functioning in fully resonant mode[J]10.1016/j.measurement.2025.118255 ↗
76. Experimental investigation of dislocation-grain boundary interaction in coarse-grained high-manganese steels using quasi in situ electron channelling contrast imaging[J]10.1016/j.matchar.2022.112545 ↗
77. In-situ electron channeling contrast imaging of local deformation behavior of lath martensite in low-carbon-steel[J]10.1016/j.actamat.2024.120337 ↗
78. Direct observation of the evolution behavior of micro to nanoscale precipitates in austenitic heat-resistant steel via electron channeling contrast imaging[J]10.1016/j.matchar.2024.114550 ↗
79. Early stage strain localization at grain boundaries during fatigue studied using in situ electron channeling contrast imaging and high-resolution electron backscattered diffraction[J]10.1016/j.scriptamat.2025.116647 ↗
80. Microstructural study of microbands in a Fe-30Mn-6.5Al-0.3C low-density steel deformed at cryogenic temperature by combined electron channeling contrast imaging and electron backscatter diffraction[J]10.1016/j.actamat.2022.117980 ↗
81. Dislocation contrast in electron channelling contrast images as projections of strain-like components[J]10.1016/j.matpr.2018.03.057 ↗
82. Direct observations of collinear dislocation interaction in a Fe-17.4 Mn-1.50 Al-0.29 C (wt.%) austenitic steel under cyclic loading by in-situ electron channelling contrast imaging and cross-correlation electron backscatter diffraction[J]10.1016/j.scriptamat.2020.05.044 ↗
83. Theory of dynamical electron channeling contrast images of near-surface crystal defects[J]10.1016/j.ultramic.2014.07.006 ↗
84. Exploring the shear behavior of masonry triplets via digital image correlation, damage quantification and Mohr-Coulomb criterion identification[J]10.1016/j.istruc.2025.109696 ↗
85. Strain-Guided Kolmogorov-Arnold networks digital image correlation method[J]10.1016/j.optlastec.2025.113481 ↗
86. A digital image correlation method for strain measurement using higher-order X-ray optical field components[J]10.1016/j.optlastec.2025.113138 ↗
87. Revealing the high-temperature stability and phase transformation in isolated TiO2 nanotubes using in situ heating TEM[J]
88. Elucidating phase transformation and nanostructure evolution behavior of Al2O3-SiO2 aerogel under rapid heating from RT to 1300 °C via in situ heating TEM[J]10.1016/j.jeurceramsoc.2025.117656 ↗
89. Mechanism study of grain evolution during isothermal heating using in-situ electron backscatter diffraction[J]10.1016/j.vacuum.2025.114370 ↗
90. Mantle region accommodating two-dimensional grain boundary sliding in ODS ferritic steel[J]10.1080/09500839.2015.1067732 ↗
91. Microstructure evolution during superplastic deformation of an Al-coated Mg alloy sheet[J]10.1016/j.jallcom.2019.07.039 ↗
92. High-temperature mechanical properties and dynamic recrystallization of Mo-14Re alloy[J]10.1016/j.matchar.2023.113617 ↗
93. Microstructural evolutions of molybdenum-rhenium (47.5 wt.%) alloy under room and high temperature compressions[J]10.1016/j.matchar.2024.114001 ↗
94. Hot compression behaviors and microstructural evolution of Mo-42 wt%Re alloy[J]10.1016/j.matlet.2022.132252 ↗
95. Exploring the fracture toughness and fatigue crack growth behavior of MoRe alloys[J]10.1016/j.ijrmhm.2024.106969 ↗
96. Understanding the hot deformation behavior of Mo 42Re alloy: insights from strain rate sensitivity, microstructure, and misorientation[J]10.1016/j.ijrmhm.2024.106741 ↗
97. Mechanical and microstructural responses in molybdenum-rhenium alloys under hot compressions[J]10.1016/j.jmrt.2024.04.063 ↗
98. Molybdenum-14Rhenium alloy—The most promising candidate for high-temperature semiconductor substrate materials[J]10.1016/j.jallcom.2024.174391 ↗
99. Tensile behavior and microstructure evolution of Mo-14 %Re alloy at room temperature and elevated temperatures[J]10.1016/j.ijrmhm.2024.106996 ↗
100. Deformation mechanism diagram and deformation instability of a Mo–Re alloy during the hot compression[J]10.1016/j.jmrt.2024.08.069 ↗