Synthesis and densification of ultra-fine ZrC powders-effects of C/Zr ratio
Source abstract
Abstract
The excess carbon and oxygen contents of ZrC nano-powders was controlled, and the resultant effects on the densification of ZrC was analyzed. The particle size of the synthesized ZrC powder was about 200 non and its oxygen content was 0.49 wt%. The good results can be attributed to the rapid heating and cooling rate, the beneficial effects of current, and the relatively low synthesis temperature by using SPS (Spark plasma sintering) for the powder synthesis. The homogeneous distribution between reactants was an important factor to minimize the formation of excess carbon. With increasing the amount of carbon in the raw powder mixture, the oxygen content of ZrC powders decreased and the densification was suppressed. The decrease of excess carbon content, the presence of oxygen in the ZrC lattice, and the fine particle size promoted the sintering of ZrC ceramics without any additives at relatively low temperature and pressure (1750 degrees C, 40 MPa).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. The zirconium-zirconium carbide system
2. General properties, preparation and characterization
3. Microstructure, mechanical, and thermal properties of (ZrB2+ZrC)/Zr3[Al(Si)]4C6 composite10.1111/jace.13038 ↗
4. Synthesis of nanosized zirconium carbide powders by a combinational method of sol-gel and pulse current heating10.1016/j.jeurceramsoc.2013.07.003 ↗
5. Carbothermal reduction synthesis of nanocrystalline zirconium carbide and hafnium carbide powders using solution-derived precursors10.1023/B:JMSC.0000041702.76858.a7 ↗
6. A study of the densification mechanisms during spark plasma sintering of zirconium (oxy-)carbide powders10.1016/j.actamat.2009.12.046 ↗
7. Synthesis and pyrolysis behavior of a soluble polymer precursor for ultra-fine zirconium carbide powders10.1016/j.ceramint.2015.02.039 ↗
8. In situ synthesis of ZrC particles and its formation mechanism by self-propagating reaction from Al-Zr-C elemental powders10.1016/j.powtec.2008.09.005 ↗
9. The thermal shock behavior of Zr3[Al(Si)]4C6 and in situ (ZrB2+ZrC)/Zr3[Al(Si)]4C6 composite10.1016/j.jallcom.2014.06.001 ↗
10. Synthesis of zirconium oxycarbide (ZrCxOy) powders: influence of stoichiometry on densification kinetics during spark plasma sintering and on mechanical properties10.1016/j.jeurceramsoc.2011.05.037 ↗
11. Scalable foaming assisted synthesis of ZrC nanopowder by carbothermal reduction10.1016/j.ceramint.2014.10.170 ↗
12. TEM study of the reaction mechanisms involved in the carbothermal reduction of zirconia10.1016/j.jeurceramsoc.2012.07.024 ↗
13. Microstructure evolution of a ZrC coating layer in TRISO particles during high-temperature annealing10.1016/j.jnucmat.2016.06.024 ↗
14. Spark plasma sintering and mechanical behaviour of ZrC-based composites10.1016/j.scriptamat.2008.05.026 ↗
15. Spark plasma sintering of pure tungsten powder: densification kinetics and grain growth10.1016/j.powtec.2017.01.050 ↗
16. Low temperature sintering of Nano-SiC using a novel Al8B4C7 additive10.1557/JMR.2010.0057 ↗
17. The processing and properties of (Zr,Hf)B2-SiC nanostructured composites10.1016/j.jeurceramsoc.2014.05.020 ↗
18. Nano-hafnium diboride powders synthesized using a spark plasma sintering apparatus10.1111/j.1551-2916.2012.05141.x ↗
19. Nano-TaC powder synthesized using modified spark plasma sintering apparatus and its densification10.1016/j.ceramint.2015.05.124 ↗
20. Synthesis and densification of nano-crystalline hafnium carbide powder10.1016/j.jeurceramsoc.2015.08.004 ↗
21. Nano-sized zirconium carbide powder: synthesis and densification using a spark plasma sintering apparatus10.1016/j.ijrmhm.2017.01.006 ↗
22. Preparation of zirconium-based ceramic and composite fine-grained powders10.1016/j.ijrmhm.2011.07.015 ↗
23. Synthesis of nanosized zirconium carbide by laser pyrolysis route10.1016/j.jallcom.2008.07.159 ↗
24. Gusev · 2001
25. Detection of current-induced vacancies in thin aluminum-copper lines using positrons10.1063/1.116700 ↗
26. Solid state reaction of zirconia with carbon10.1016/S0167-2738(97)00398-6 ↗
27. Electric current activation of sintering: a review of the pulsed electric current sintering process10.1111/j.1551-2916.2010.04210.x ↗
28. Synthesis of nanosized zirconium carbide by a sol-gel route10.1016/j.jeurceramsoc.2006.06.005 ↗
29. Synthesis and hot-pressing of single-phase ZrCxOy and two-phase ZrCxOy-ZrO2 materials10.1016/0267-3762(86)90022-6 ↗
30. Reactive spark plasma sintering of ZrC and HfC ceramics with fine microstructures10.1016/j.scriptamat.2013.02.017 ↗
31. Effect of solid solution formation on densification of hot-pressed ZrC ceramics with MC (M = V, Nb, and Ta) additions10.1016/j.jeurceramsoc.2011.10.045 ↗