A comprehensive review on recycling methods for cemented tungsten carbide scraps highlighting the electrochemical techniques
Source abstract
Abstract
Abstract The scraped and end-of-life tungsten carbide materials demand innovative recycling methods to recover valuable refractory and strategic metals like tungsten, cobalt, nickel etc. The efficient treatment of this material significantly benefits to economics as compared to its ore. Several methods based on pyrometallurgy or hydrometallurgy or their suitable combination have been explored. These methods encompass several unit operations tested at the laboratory as well as on the pilot scale. Some of the methods also matured into technology on a commercial scale. However, the demonstration at the pilot plant scale is towards the validation of the developed process. Each of the methods tested so far has its own pros and cons. For instance, the combination of pyro-hydrometallurgical process has some advantages over hydrometallurgical processes such as higher efficiency, lower costs, and a few industrial requirements, but it is energy-intensive and requires high capex. Besides, considerable attempts have been put into the development of the electrodissolution processes, recently. Several studies available through reports, research articles, and patents recommend a selective electro-dissolution process, which is flexible enough to recycle different varieties of WC scraps. Various electrolytes based on acidic (H2SO4, HCl, H3PO4, HNO3) and alkaline (NaOH and NH3) media worked well to dissolve the refractory metal. Several additives are often added as supporting agents to obviate the most common constraint in electrodissolution, i.e., passivation of the anode. This review particularly highlights the electrochemical methods for the recycling of WC materials along with other recycling methods in brief.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Corrosion behavior of WC-Co tool bits in simulated (concrete, soil, and mine) solutions with and without chloride additions10.1016/j.ijrmhm.2019.105062 ↗
2. Oxidation and dissolution of tungsten carbide powder in water10.1016/S0263-4368(00)00010-X ↗
3. Electrochemical behaviour of tungsten-carbide hardmetals10.1016/0921-5093(95)10137-3 ↗
4. Corrosion behaviour of WC hardmetals with nickel-based binders10.1016/j.corsci.2018.11.015 ↗
5. Modes of failure of cemented tungsten carbide tool bits (WC/Co): a study of wear parts10.1016/j.ijrmhm.2015.06.018 ↗
6. Edge chipping mechanism and failure time prediction on carbide cemented tool during drilling of CFRP/Ti stack10.1007/s00170-017-0017-7 ↗
7. Failure analyses of cemented tungsten carbide extrusion die10.1179/175158409X459967 ↗
8. Processing of tungsten alloy scrap for the recovery of tungsten metal
9. M.V.M.R. Gardano, Andrea, Strologo, Sauro Foa, Process for recovering and re-using cobalt and tungsten from reaction liquors, European Patent 0 666 108 A1, 1995.
10. Anodic dissolution behaviour of tungsten carbide scraps in ammoniacal media10.4028/www.scientific.net/AMR.828.11 ↗
11. Studies on the preparation of pure ammonium Para tungstate from tungsten alloy scrap10.1016/j.hydromet.2006.08.002 ↗
12. Selective removal of the cobalt binder in WC/Co based hardmetal scraps by acetic acid leaching10.1016/j.hydromet.2004.09.002 ↗
13. Selective dissolution of the cobalt binder from scraps of cemented tungsten carbide in acids containing additives10.1016/0304-386X(96)00023-0 ↗
14. Separation of cobalt and tungsten carbide by anodic dissolution of solid alloys in phosphoric acid10.1007/s11003-005-0078-x ↗
15. Hans G. Niitzel, Process for decomposing hard metal scrap, US Patent 4349423, 1982.
16. Lin, Jing-chie, Lin, Jainn-yuan, Lee, Sheng-long, Process for recovering tungsten carbide from cemented tungsten carbide scraps by selective electrolysis, 5384016, 1995.
17. Tungsten electrochemistry in alkaline solutions—anodic dissolution and oxygen reduction reaction10.1134/S0036024411130322 ↗
18. Anodic leaching of tungsten alloy swarf: a statistical approach10.1007/BF00241321 ↗
19. Four-factor optimization for electrochemical conversion of WC-Ni pseudo alloy in sulfuric acid solutions10.1080/00986445.2011.631234 ↗
20. Recycling of tungsten carbide scrap metal: a review of recycling methods and future prospects10.1016/j.mineng.2018.03.036 ↗
21. Selective dissolution of the binder phase alloy (Co-W) from WC-Co cemented carbides in particulate bed electrode systems10.1149/1.2123643 ↗
22. T.K.K. Clarence D. Vanderpool, Electrolytic method for producing ammonium paratungstate from cemented tungsten carbide, US Patent 5021133, 1991.
23. Clarence D. Vanderpool, Electrolytic disintegration of sintered metal carbides, US Patent 4385972, 1983.
24. Resource-saving methods for recycling waste tungsten carbide-cobalt cermets and extraction of tungsten from tungsten concentrates10.1134/S0040579507040161 ↗
25. A novel process for recycling tungsten carbide scrap10.1016/0301-7516(85)90022-5 ↗
26. Electrolytic recovery of tungsten and cobalt from tungsten carbide scrap10.1016/0304-386X(89)90030-3 ↗
27. M.H. Ghandehari, Process for recovering metal carbide powder from cemented carbides, US4234333, 1980.
28. Electrochemical dissolution of tungsten under pulsed conditions10.1023/A:1018493016444 ↗
29. Recovery of tungsten and cobalt from secondary raw materials by a combined electrochemical and chemical procedure10.1134/S1070427210090284 ↗
30. Yoshitaka Kobayakawa, Method of recovering the component metals from sintered metal carbides, US 4,140,597, 1979.
31. Clarence D.Vanderpool, Recovery of tungsten from heavy metal scrap, US4283258, 1981.
32. T.S. Xingbo Yang, Jie Xiong, Recycling tungsten carbide, US 2011/0048968 A1, 2011.
33. Potentiodynamic polarization behavior and microscopic examination of tungsten carbide hard metal materials in supported ammoniacal medium10.4152/pea.202003185 ↗
34. Electrowinning of cobalt from sulphate solutions10.1016/j.hydromet.2005.08.003 ↗
35. Scrap recycling of tungsten-based secondary material for the recovery of tungsten Monocarbide (WC) and other valuable constituents using an acid leach process: a preliminary study
36. An integrated approach to the optimum utilization of national tungsten resources: technology gaps10.1007/BF02744665 ↗
37. Recycling of WC-co from scrap materials10.1179/003258902225001588 ↗
38. Reclamation of tungsten from carbide scraps and spent materials10.1007/s10853-018-2876-1 ↗
39. Recycling of cemented tungsten carbide mining tool scrap10.17159/2411-9717/2015/v115n12a9 ↗
40. Katiyar · 2014 · 1
41. Recycling of WC-Co hardmetals by oxidation and carbothermal reduction in combination with reactive sintering10.3176/eng.2012.2.03 ↗
42. Extraction factor of tungsten sources from tungsten scraps by zinc decomposition process10.1515/amm-2015-0120 ↗
43. Development of manufacturing technology for direct recycling cemented carbide (WC-Co) tool scraps10.2320/matertrans.M2014213 ↗
44. Recycling of secondary tungsten resources10.1007/s12666-016-1003-8 ↗
45. Review on sintering process of WC-Co cemented carbide in metal injection molding technology
46. Review: liquid phase sintering10.1007/s10853-008-3008-0 ↗
47. Liquid phase sintering of functionally graded WC-co composites10.1016/j.ijrmhm.2005.04.017 ↗
48. The role of the binder phase in the WC-co sintering10.1590/S1516-14392001000200003 ↗
49. Frayman · 2009
50. Mapping the global flow of tungsten to identify key material efficiency and supply security opportunities10.1016/j.resconrec.2015.07.003 ↗
51. Indian Bureau of Mines, Indian Minerals Yearbook 2018 (Part- II Metals and Alloys) Ministry of mines indian bureau of mines, 2018 (2019) 1–9. https://mitra.ibm.gov.in/Documents/IMYB/Vol. II REVIEWS ON METALS AND ALLOYS/03132018114602Antimony AR 2017.pdf.
52. Indian
53. Didier · 2020
54. Tungsten in Hardmetals10.1007/978-1-4615-4907-9_9 ↗
55. Cemented carbides-a success story
56. A.G. Hartline, J.A. Campbell, T.T. Magel, Process for Reclaiming Cemented Metal Carbide, US 3,953,194, 1976.
57. Lassner · 2005
58. Efficient recycling of WC-Co hardmetal sludge by oxidation followed by alkali and sulfuric acid treatments10.1007/s12540-016-6060-3 ↗
59. Cutting-tool recycling process with the zinc-melt method for obtaining thermal-spray feedstock powder (WC-Co)
60. Thermal oxidation behavior of WC-Co hard metal machining tool tip scraps10.1016/j.jmatprotec.2012.01.009 ↗
61. Recovery of tungsten from WC-Co hard metal scraps using molten salts electrolysis10.1016/j.jmrt.2018.10.010 ↗
62. A new recycling process for tungsten carbide soft scrap that employs a mechanochemical reaction with sodium hydroxide10.3390/met7070230 ↗
63. M.L. Heilig, Process for chlorination of material containing. hard metal, US3560199, 1994.
64. S.S. Grinder, A process for chlorinating resources containing recoverable metals, WO 2009/139715 Al, 2009.
65. T. Rintaro Takahashi and Takehiko Yuize, Method of chemically disintegrating and pulverizing sold material, US2848313, 1958.
66. Leaching behavior of Al, Co and W from the Al-alloying treated WC-Co tool as a new recycling process for WC hard scrap10.3390/met6080174 ↗
67. Recycling process of WC-co cermets by hydrothermal treatment10.1007/s10853-005-4407-0 ↗
68. Recovery of submicron cobalt-powder by acidic leaching of cemented carbide scrap
69. Mohammad H. Ghandehari, Process for recovering metal carbide powder from cemented carbides, US4234333, 1980.
70. Environmental life cycle assessment of cemented carbide (WC-Co) production10.1016/j.jclepro.2018.10.272 ↗
71. Tungsten recycling in the United States in 2000