Microstructure and properties of WC–Co/3Cr13 joints brazed using Ni electroplated interlayer
Source abstract
Abstract
Abstract The brazed joints of WC–Co cemented carbide and 3Cr13 stainless steel using Ni electroplated on Cu–Zn alloy as interlayer were investigated. The shear strength of the WC–Co/interlayer/3Cr13 joints increased firstly and then decreased with the increase of brazing temperature or brazing time. The maximum shear strength value of the brazed joints was 154 MPa at 1100 °C for 10 min. The characterizations of the WC–Co/interlayer/3Cr13 joints were studied by SEM, EDS and XRD. The results showed that the brazed joints fractured in the bulk WC–Co substrates near the interlayer. The added Ni promoted the formation of interdiffusion zone, which possessed positive effects on the bond strength of the WC–Co/interlayer/3Cr13 joints. Austenite solid solution was formed in the WC–Co/interlayer/3Cr13 joint, and the majority of austenite solid solution presented as columnar crystal. The number of austenite crystals on the WC–Co/interlayer interface was tremendously more than that on the interlayer/3Cr13 interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. A novel (W–Al)–C–Co composite cemented carbide prepared by mechanical alloying and hot-pressing sintering10.1016/j.ijrmhm.2007.04.002 ↗
2. Application of fine grained tungsten carbide based cemented carbides10.1016/0263-4368(95)92672-7 ↗
3. Wetting behavior of Co based active brazing alloys on SiC and the interfacial reactions10.1016/S0167-577X(03)00087-9 ↗
4. Effects of chromium on the interface and bond strength of metal–ceramic joints10.1016/S0254-0584(02)00072-X ↗
5. Deformability of WC–Co sinters and 17–4 PH steel brazed joints10.1016/j.jmatprotec.2004.07.118 ↗
6. Effect of Ni interlayer on strength and microstructure of diffusion-bonded Mo/Cu joints10.1016/j.matlet.2011.08.077 ↗
7. Prince · 1995
8. Cemented carbide phase diagrams: a review10.1016/j.ijrmhm.2011.02.004 ↗
9. Vacuum brazing TiAl-based alloy to 40Cr steel using Ag–Cu–Zn filler metal10.1023/A:1014269923133 ↗
10. Metal to ceramic joining via a metallic interlayer bonding technique10.1016/j.jmatprotec.2003.10.005 ↗
11. Interfacial reactions in alumina/CuAgTi braze/CuNi system10.1016/j.scriptamat.2004.09.008 ↗
12. Joining silicon nitride ceramic using a composite powder as active brazing alloy10.1016/j.msea.2003.10.276 ↗
13. Vacuum brazing of 25Cr3MoA/YG6 using Cu-based microcrystalline brazing alloy
14. Effects of Cr3C2 on the microstructure and mechanical properties of the brazed joints between WC–Co and carbon steel10.1016/j.ijrmhm.2005.04.003 ↗
15. Joining of tungsten carbide to nickel by direct diffusion bonding and using a Cu–Zn alloy10.1007/s10853-008-2894-5 ↗
16. Flemings · 1974