Design, fabrication and performance of Al2O3/(W0.7Ti0.3)C+Al2O3/TiC multilayered ceramic nozzles
Source abstract
Abstract
Abstract Al 2 O 3 /(W 0.7 Ti 0.3 )C + Al 2 O 3 /TiC multilayered ceramic nozzles (N1, N2, N3 and N4) with different thickness ratios among constituent layers were produced by hot-pressing. The value of the residual stress inside the layered nozzle during fabricating process was calculated by means of the finite element method. The mechanical properties at the surface layer of these layered materials were measured, the microstructure was examined. The wear behaviors of the multilayered nozzles were investigated and compared with an unstressed reference nozzle (N5). Results showed that the multilayered nozzles had superior erosion wear resistance to that of the stress-free one. The erosion wear resistance of the layered nozzles was influenced by the thickness ratio among constituent layers. The N4 nozzle with thickness ratio of two between adjacent layers exhibited higher erosion wear resistance over the N1, N2 and N3 nozzles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Toughening of layered ceramic composites with residual surface compression10.1111/j.1151-2916.1996.tb07883.x ↗
2. Mechanical characterization of Al2O3/ZrO2 hybrid laminates10.1016/S0955-2219(98)00151-4 ↗
3. Laminated ceramic structures from oxide systems10.1016/j.compositesb.2006.02.018 ↗
4. Design and production of ceramic laminates with high mechanical resistance and reliability10.1016/j.actamat.2006.06.019 ↗
5. Effects of residual stresses on the fracture properties of non-oxide laminated composites10.1016/j.jeurceramsoc.2006.04.173 ↗
6. Multilayer ceramic composites with high failure resistance10.1016/j.jeurceramsoc.2006.04.030 ↗
7. Edge stresses in alumina/zirconia laminates10.1111/j.1151-2916.1997.tb03031.x ↗
8. Measurements of residual stress distributions in Al2O3/3Y–TZP multilayered composites by fluorescence and Raman microprobe piezo-spectroscopy10.1016/j.actamat.2004.12.003 ↗
9. Tribological behaviour of Al2O3/ZrO2–ZrO2 laminated composites10.1016/S0043-1648(00)00429-4 ↗
10. Tribological behaviour of Si3N4 and Si3N4–% TiN based composites and multi-layer laminates10.1016/j.wear.2005.03.027 ↗
11. Influence of residual stress on the wear behaviour of alumina/alumina–zirconia laminated composites10.1111/j.1151-2916.2003.tb03512.x ↗
12. Abrasive wear in ceramic laminated composites10.1016/j.wear.2005.07.009 ↗
13. Erosion wear of boron carbide nozzles by abrasive air-jets
14. Wear behaviors of the ceramic nozzles in sand blasting treatments10.1016/S0955-2219(02)00183-8 ↗
15. Development of gradient ceramic nozzle materials for sand blasting surface treatments10.1016/j.ijrmhm.2006.03.006 ↗
16. Effect of residual stresses on the erosion wear of laminated ceramic nozzles10.1016/j.matchar.2006.10.009 ↗
17. Erosion wear behaviours of SiC/(W, Ti)C laminated ceramic nozzles in dry sand blasting processes10.1016/j.msea.2006.08.090 ↗
18. Erosion wear of laminated ceramic nozzles10.1016/j.ijrmhm.2006.06.005 ↗
19. A modified indentation toughness technique10.1111/j.1151-2916.1983.tb10571.x ↗