journal article·2014-01

Microstructure and dynamic mechanical properties of tungsten-based alloys in the form of extruded rods via microwave heating

Yunzhu Ma, Jiajia Zhang, Wensheng Liu, Peng Yue, Baiyun Huang

Publisher page

Abstract

Abstract The dynamic mechanical properties of 93W–4.9Ni–2.1Fe alloys in the form of extruded rods sintered by microwave heating were investigated under dynamic compression using a split Hopkinson Pressure Bar. The microstructure and microhardness values of the sintered specimens after dynamic compression were analyzed and tested. The results show that the deformation amount and microhardness of specimens increase with increasing strain rate. When the strain rate is 3000 S− 1, the deformation amount is increased to the maximum value of 59.8%, and the microhardness values of the tungsten grains and the matrix phase are also promoted to the maximum values of 7.66 and 6.92 Gpa, respectively. The formation of cracks during compressive deformation initiates before the appearance of the adiabatic shear bands. As the strain rate increases, cracks initiating at the edge of specimens gradually propagate to the bulk alloy, and the adiabatic shear band is observed at about 45° to the loading direction under the strain rate of 3000 S− 1. These findings suggest that tungsten-based alloys extruded rods sintered by microwave heating would be an ideal material with excellent self-sharpening and penetration performance for penetrators.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Mechanical alloying process of 93W-5.6Ni-1.4Fe tungsten heavy alloy10.1016/S0924-0136(96)02638-6 ↗
2. Microstructure and mechanical properties of a hot-hydrostatically extruded 93W-4.9Ni-2.1Fe alloy10.1016/j.msea.2006.07.074 ↗
3. Microstructural influence on the dynamic response of tungsten heavy alloys10.1007/BF02658066 ↗
4. Self-sharpening behavior during ballistic impact of the tungsten heavy alloy rod penetrators processed by hot-hydrostatic extrusion and hot torsion10.1016/j.msea.2010.04.050 ↗
5. Microstructure characteristics and a deformation mechanism of fine-grained tungsten heavy alloy under high strain rate compression10.1016/j.msea.2010.07.102 ↗
6. Microwave versus conventional sintering: a review of fundamentals, advantages and applications10.1016/j.jallcom.2010.01.068 ↗
7. Microwave sintering of W-Ni-Fe alloy10.1016/j.scriptamat.2006.09.010 ↗
8. Dynamic tensile property of Zr-based metallic glass/porous W phase composite10.1016/S1005-0302(10)60146-6 ↗
9. Some structural effects of plastic deformation on tungsten heavy metal alloys10.1016/S0921-5093(00)01369-1 ↗
10. Properties and microstructural evolution of W-Ni-Fe alloy by microwave sintering10.1016/j.ijrmhm.2012.05.004 ↗
11. The measurement of grain contiguity in two-phase alloys
12. Effect of tungsten particle shape on dynamic deformation and fracture behavior of tungsten heavy alloys10.1007/s11661-998-1015-z ↗
13. Comparative structure and physical properties of W-Ni-Fe alloys containing 95 and 25wt% tungsten10.1007/BF01672345 ↗
14. Tensile behavior change depending on the varying tungsten content of W-Ni-Fe alloys10.1016/j.ijrmhm.2006.12.003 ↗
15. Dynamic deformation behavior of oxide-dispersed tungsten heavy alloy fabricated by mechanical alloying10.1007/s11661-001-0013-1 ↗