The effect of (ZrB2-SiC) addition on microstructure and mechanical properties of NbMo-matrix composites fabricated by hot-pressing
Source abstract
Abstract
Abstract The effects of (0–60%) vol% (70 vol% ZrB2 + 30 vol% SiC) additions on microstructure and properties of NbMo substrate fabricated by hot-pressing were studied at room temperature. Types of formed phase were decided by the amount of ZrB2 and SiC additives. The effective eutectic phase was observed in 15 vol% (70 vol% ZrB2 + 30 vol% SiC)-NbMo, which was attributed to the addition of SiC. 30 vol% (70 vol% ZrB2 + 30 vol% SiC)-NbMo had the highest relative density of 98.69%. Compared with x ZrB2-NbMo composites, the addition of SiC could further improve the hardness of NbMoss in x (70% ZrB2 + 30% SiC)-NbMo when the value of x was same, and NbMoss in 60 vol% (70 vol% ZrB2 + 30 vol% SiC)-NbMo had the highest hardness of 6.82 GPa. Only the 15 vol% (70 vol% ZrB2 + 30 vol% SiC) addition could improve the compressive strength of NbMo matrix. The reasons for the low strength of 30, 45, 60 vol% (70% ZrB2 + 30% SiC)-NbMo were the lack of ductile phase and the large amount of hard phase production.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Niobium oxides and niobates physical properties: review and prospects10.1016/j.pmatsci.2016.02.001 ↗
2. Effect of alloy composition on microstructure and high temperature properties of Nb-Zr-C ternary alloys10.1016/S0921-5093(02)00217-4 ↗
3. High temperature mechanical behavior of Nb-Mo-ZrC alloys10.1016/S0921-5093(03)00073-X ↗
4. Processing, microstructure, and mechanical properties of large-grained zirconium diboride ceramics10.1016/j.msea.2016.06.017 ↗
5. Inherent anisotropy in transition metal diborides and microstructure/property tailoring in ultra-high temperature ceramics-a review10.1016/j.jeurceramsoc.2017.09.012 ↗
6. Preparation and properties of hot-pressed NbMo matrix composites reinforced with ZrB2 particles10.1016/j.ijrmhm.2017.06.011 ↗
7. High temperature compression properties of hot-pressed NbMo-matrix composites reinforced with ZrB2 particles10.1016/j.ijrmhm.2018.08.007 ↗
8. High-strength zirconium diboride-based ceramics10.1111/j.1551-2916.2004.01170.x ↗
9. Mechanical characterization of ZrB2-SiC composites with varying SiC particle sizes10.1111/j.1551-2916.2011.04885.x ↗
10. Temperature dependence of microstructure evolution during hot pressing of ZrB2-30vol.% SiC composites10.1016/j.ijrmhm.2015.06.017 ↗
11. TEM investigation of hot pressed-10 vol.% SiC-ZrB2 composite10.1179/174367510X12722693956310 ↗
12. Interface and defect characterization in hot-pressed ZrB2-SiC ceramics10.1016/j.ijrmhm.2010.12.010 ↗
13. Processing and characterization of ZrB2-based ultra-high temperature monolithic and fibrous monolithic ceramics10.1023/B:JMSC.0000041691.41116.bf ↗
14. Mechanical behavior of zirconium diboride-silicon carbide ceramics at elevated temperature in air10.1016/j.jeurceramsoc.2013.05.003 ↗
15. Elevated temperature strength enhancement of ZrB2-30 vol% SiC ceramics by postsintering thermal annealing10.1111/jace.14029 ↗
16. Rudy · 1966 · 1
17. Mechanical properties of ZrB2- and HfB2-based ultra-high temperature ceramics fabricated by spark plasma sintering10.1016/j.jeurceramsoc.2012.12.009 ↗
18. Thermal shock resistance of ZrB2 and ZrB2–30% SiC10.1016/j.matchemphys.2008.05.048 ↗
19. Microstructure and mechanical properties of a Mo-toughened Mo3Si-based in situ nanocomposite10.1016/j.vacuum.2014.07.004 ↗
20. The influence of powder characteristics on mechanical properties of Al2O3-TiC-co ceramic materials prepared by co-coated Al2O3/TiC powders10.1016/j.ijrmhm.2012.04.015 ↗
21. Effect of (Ni,Mo) and TiN on the microstructure and mechanical properties of TiB2 ceramic tool materials10.1016/j.msea.2006.07.012 ↗
22. Ambient to high temperature fracture toughness and fatigue-crack propagation behavior in a Mo-12Si-8.5B (at.%) intermetallic10.1016/S0966-9795(01)00008-5 ↗
23. Flow characteristics of highly constrained metal wires