Ti (C, N)-based cermets sintered under high pressure
Source abstract
Abstract
Abstract In this study, high pressure and high temperature sintering (HPHT) is adopted in the cermet fabrication process, and the microstructure and mechanical properties of cermets with TiC0.5N0.5–15WC–10Mo2C–5TaC–10Ni–10Co (wt%) sintered under 5 GPa and different temperatures (900–1600 °C) using 6 × 14 MN cubic press are investigated. Results show that the densities of samples can reach up to 7.00 g/cm3. Vickers hardness and fracture toughness of the products are over 1727 HV30 and 7.2 MPa m1/2 respectively. In addition, the sintering results are compared with the data that obtained from commercial samples which produced via conventional sintering technique. The conclusion is that high density and high hardness cermets can be obtained through HPHT sintering.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Ti(C, N) cermets metallurgy and properties10.1016/0263-4368(95)00027-G ↗
2. Preparation of ultra-fine TiC0.7N0.3-based cermets10.1016/j.ijrmhm.2007.05.001 ↗
3. Effect of TiC/TiN powder size on microstructure and properties of Ti(C, N)-based cermets10.1016/j.msea.2006.10.003 ↗
4. Effect of Ni powder characteristics on the consolidation of ultrafine TiMoCN cermets by means of SPS and HIP technologies10.1016/j.msea.2008.09.037 ↗
5. Effect of WC content on the microstructure and mechanical properties of Ti(C0.5N0.5)–WC–Mo–Ni cermets10.1016/j.ijrmhm.2009.10.005 ↗
6. Effect of WC content on the microstructure and mechanical properties of (Ti, W)(C, N)–Co cermets10.1016/j.ijrmhm.2007.01.003 ↗
7. Effect of Mo addition on the microstructure and mechanical properties of ultra-fine grade TiC–TiN–WC–Mo2C–Co cermets10.1016/j.ijrmhm.2007.05.005 ↗
8. Titanium carbonitride-based cermets: processes and properties10.1016/0921-5093(93)90588-6 ↗
9. Development of TiCN-based cermets: mechanical properties and wear mechanism10.1016/j.ijrmhm.2012.07.001 ↗
10. Microstructure and mechanical properties of TiC–TiN based cermets10.1016/j.ijrmhm.2008.10.006 ↗
11. Ultrafine (Ti, M)(C, N)-based cermets with optimal mechanical properties10.1016/j.ijrmhm.2010.08.007 ↗
12. Effect of ultra-fine powders on the microstructure of Ti(CN)–xWC–Ni cermets10.1016/j.actamat.2003.11.021 ↗
13. Spark Plasma Sintering Properties of Ultrafine Ti (C, N)-based Cermets
14. Characterization of phase transformation and microstructure of nano hard phase Ti(C, N)-based cermets by spark plasma sintering
15. Combustion synthesis and densification of large-scale TiC–xNi cermets10.1016/S0167-577X(02)00437-8 ↗
16. Study on preparation and microwave sintering process of ultrafine TiCN matrix cermets
17. Preparation and properties of ultrafine TiCN matrix cermets by vacuum microwave sintering10.1007/s12598-010-0162-8 ↗
18. Huang · 1995
19. Manufacturing technology and characteristic of multi-grained Ti(C, N)-based cermets
20. A quantitative measurements of pressure gradients for the pyrophyllite and magnesium oxide pressure-transmitting mediums to 8GPa in a large-volume cubic cell10.1080/08957959.2011.614238 ↗
21. A hybrid pressure cell of pyrophyllite and magnesium oxide to extend the pressure range for large volume cubic presses
22. Hardness to toughness relationship of fine-grained hardmetals WC–Co10.1016/S0263-4368(98)00028-6 ↗
23. A simple model for assessing the high pressure melting of metals: nickel, aluminum and platinum10.1016/S0921-4526(00)00542-1 ↗