Detailed microstructure of a cBN based cutting tool material
Source abstract
Abstract
Abstract The microstructure of a commercial polycrystalline cubic boron nitride (PCBN) tool material was studied using scanning electron microscopy with energy-dispersive X-ray analysis and transmission electron microscopy with electron energy loss spectroscopy and energy filtered TEM. These results were compared with results from X-ray diffraction and thermodynamic calculations. It is shown that this PCBN material consists of cBN both as micrometre-sized and nanometre-sized grains. The micrometre-sized grains show primarily straight phase boundaries and little reaction with the surrounding matrix. The matrix consists of mainly TiCN, with grains ranging from nanometres to sub-micrometres. The C and N content in TiCN varies, indicating a system far from equilibrium. Only small reaction zones are found and the major reaction is the one between Al and O, forming Al2O3. It is also shown that it is possible to prepare samples thin enough for TEM/EFTEM/EELS studies, enabling the study of minor reaction phases like TiB2.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. De Vries RC. Cubic boron nitride: handbook of properties. General Electric Tech Rep; 1972, 6 (No. 72CRD178).
2. Properties and uses of amborite
3. Machining of hard materials10.1016/S0007-8506(16)30164-0 ↗
4. The mechanical properties of cubic boron nitride – a perspective view
5. Cutting tools with COMPAX diamond and BZN compact inserts slash production time and lower part cost
6. Tool wear and cutting temperature of CBN tools in machining of hardened steels
7. Surface studies of diamond
8. The influence of temperature and heating time on PCD performance
9. Sintered superhard materials10.1126/science.208.4446.873 ↗
10. The current status of diamond and cubic boron nitride composites
11. Electron microscopy investigations of the cBN–Ti compound composites10.1016/S0254-0584(03)00016-6 ↗
12. Cubic BN sintered with Al under high temperature and high pressure10.1088/0256-307X/24/8/070 ↗
13. A transmission electron microscope study of a cubic boron nitride-based compact material with AlN and AlB2 binder phase10.1007/BF01133363 ↗
14. TEM investigation of high-pressure reaction-sintered cBN–Al composites10.1023/B:JMSC.0000034176.85765.40 ↗
15. Weidow J. The microstructure of sintered cubic boron nitride (cBN) with binder. Master Thesis. Göteborg, Sweden: Chalmers University of Technology; 2005.
16. Goldstein · 2003
17. Thermo-Calc and DICTRA enhance materials design and processing10.4028/www.scientific.net/MSF.475-479.3339 ↗
18. The Thermo-Calc databank system10.1016/0364-5916(85)90021-5 ↗
19. CCC1. Commercially available database from Thermo-Calc software AB; 2005.
20. SSUB. Substance database from SGTE (Scientific Group Thermodata Europe).
21. COST 507. Definition of thermochemical and thermophysical properties to provide a database for the development of new light alloys. In: Effenberg G, (editor). COST 507. 1998.
22. Experimental investigation of the equilibrium composition of titanium carbonitride and analysis using thermodynamic modelling10.3139/146.018051 ↗
23. Robertson · Pure Appl Chem · 1994 · 66 · 178910.1351/pac199466091789 ↗
24. Majewski A, Laridjani Rouhani M, Masri P. Walter Schottky Institute Annual Report. http://www.wsi.tu-muenchen.de/research/annual_reports/rep2000/annual_report_2000.htm, (accessed February, 2008).