The electrochemical and tribological behavior of carbide and carbonitride films in bio-simulated fluid
Source abstract
Abstract
Application of hard coatings such as nitride, carbide, and nitrocarbide improves corrosion and wear resistance. In this work, an RF magnetron sputtering was used to coat TaC films with various target power values. Furthermore, TaCN films were deposited using nitrogen gas at the same target power values using the RF magnetron sputtering. Investigations were conducted on the mechanical, electrochemical, and tribological impacts of the carbide and carbonitride phases. Ta N and Ta C bonds were detected, and X-ray photoelectron spectroscopy (XPS) was used to analyze the chemical composition and bonding arrangement. TaCN films showed greater wear rate (2.06 × 10 −7*mm 3/Nm), corrosion resistance (44.811 × 10 −6, mm·yr-1) in Ringer solution, and a lower friction coefficient (0.236) compared with TaC films.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Relationship between surface properties (roughness, wettability) of titanium and titanium alloys and cell behaviour10.1016/S0928-4931(03)00033-X ↗
2. Metal ion release from metal implants10.1016/j.msec.2004.08.018 ↗
3. Work function measurement of transition metal nitride and carbide thin films10.1016/j.vacuum.2005.11.030 ↗
4. Tribochemistry dependent tribological behavior of superhard TaC/SiC multilayer films10.1016/j.surfcoat.2018.01.064 ↗
5. Wettability and biocompatibility of TaCx films deposited on AISI316L stainless steel: effect of methane concentration10.1007/s10904-019-01193-1 ↗
6. Effect of pH on the electrochemical behavior of tantalum in borate buffer solutions10.1007/s11665-016-2295-x ↗
7. Passive and semiconducting properties assessment of commercially pure tantalum in Hank’s physiological solution10.1007/s11665-017-3108-6 ↗
8. Electrochemical behavior assessment of tantalum in aqueous KOH solutions10.1016/j.ijrmhm.2016.12.004 ↗
9. Growth of TaC thin films by reactive direct current magnetron sputtering: composition and structure10.1116/1.576492 ↗
10. Structure and properties of TaCx coating on biomedical 316L stainless steel by RF magnetron sputtering
11. Microstructure, mechanical and tribological properties of TaCN composite films by reactive magnetron sputtering10.1016/j.ceramint.2020.04.205 ↗
12. Relationship between CH4/Ar ratio, stoichiometry, and mechanical properties of TaCx coatings produced by reactive magnetron sputtering10.1016/j.apsusc.2021.149879 ↗
13. Influence of nitrogen partial pressure on structure, mechanical and tribological properties of TaCN coatings10.1016/j.ceramint.2021.06.031 ↗
14. Tantalum carbide etch characterization in inductively coupled Ar∕Cl2∕HBr plasmas10.1116/1.2218854 ↗
15. Mechanical and Tribological properties of TiTaBN graded-composite coatings deposited using the CFUBMS technique10.1080/10402004.2015.1138011 ↗
16. Adhesion and tribological properties of TiTaBN coatings with a graded interlayer deposited by pulsed DC biased and continuous dc biased magnetron sputtering10.1080/01694243.2015.1049399 ↗
17. Nanostructured TaC film deposited by reactive magnetron sputtering: influence of gas concentration on structural, mechanical, wear and corrosion properties10.1016/j.ceramint.2019.01.055 ↗
18. Structure, mechanical and tribological properties, and oxidation resistance of TaC/a-C:H films deposited by high power impulse magnetron sputtering10.1016/j.ceramint.2020.06.284 ↗
19. Development of TaC-based transition metal carbide superlattices via compound target magnetron sputtering10.1016/j.ijrmhm.2023.106165 ↗
20. Preparation and characterization of tantalum carbide (TaC) ceramics10.1016/j.ijrmhm.2015.06.015 ↗
21. Energy-efficient direct current arc plasma synthesis of tantalum carbide powder by advanced vacuum-free method10.1016/j.ijrmhm.2023.106131 ↗
22. Microstructure, mechanical and tribological properties of TaCN composite films by reactive magnetron sputtering10.1016/j.ceramint.2020.04.205 ↗
23. Synthesis and evaluation of TaC nanocrystalline coating with excellent wear resistance, corrosion resistance, and biocompatibility10.1016/j.ceramint.2021.03.333 ↗
24. Tribological behavior of DLC films and duplex ceramic coatings under different sliding conditions10.1016/j.ceramint.2018.01.158 ↗
25. Investigating the structure, adhesion and tribological properties of Al and Zr-doped TiN coatings with various substrate bias voltage and working pressure10.1177/1350650120940071 ↗
26. On the optical microscopic method for the determination of ball-on-flat surface linearly reciprocating sliding wear volume10.1016/j.wear.2013.01.107 ↗
27. Self-adaption ta/TaC multilayer coating with fine grains: toward excellent corrosion resistance in aggressive environment10.1007/s10853-021-06178-5 ↗
28. Stoichiometry behavior of TaN, TaCN and TaC thin films produced by magnetron sputtering10.1016/j.apsusc.2013.03.028 ↗
29. Microstructure, mechanical and tribological properties of TaCN composite films10.1179/1743294414Y.0000000317 ↗
30. Wear and corrosion properties of CP-titanium coated with Chitin–Ceramic nanocomposites10.1016/j.matchemphys.2023.127801 ↗
31. In vitro corrosion and tribocorrosion performance of biocompatible carbide coatings10.3390/coatings10070654 ↗
32. Influence of plasma-nitriding and surface roughness on the wear and corrosion resistance of thin films (PVD/PECVD)10.1016/j.surfcoat.2008.05.022 ↗
33. Surface characterization and electrochemical properties of tantalum nitride (TaN) nanostructured coatings produced by reactive DC magnetron sputtering
34. Studying the in vitro corrosion response of nanostructured TaN coatings in Hank’s physiological solution10.1111/ijac.13756 ↗
35. An investigation regarding semiconducting and passive behaviors of coarse- and nano-structured pure ta in Ringer’s physiological electrolyte: role of anodic passive potential10.1088/2053-1591/aada36 ↗
36. Antibacterial and corrosion resistant ANPs-TaC nanocomposite coating for biomedical applications10.1016/j.surfcoat.2023.130056 ↗
37. Wear and corrosion behaviour of various surface treated medical grade titanium alloy in bio-simulated environment10.1016/j.wear.2009.01.056 ↗
38. Improved wear and corrosion resistance of biological compatible TiZrNb films on biomedical Ti6Al4V substrates by optimizing sputtering power10.1016/j.surfcoat.2021.127866 ↗
39. Effect of local treatment temperature of ultrasonic nanocrystalline surface modification on tribological behavior and corrosion resistance of stainless steel 316L produced by selective laser melting10.1016/j.surfcoat.2020.126080 ↗
40. Investigation of corrosion and tribological characteristics of annealed CrN/CrAlN coatings deposited by CAE-PVD10.1016/j.ceramint.2022.09.286 ↗
41. Nanostructured TaC film deposited by reactive magnetron sputtering: influence of gas concentration on structural, mechanical, wear and corrosion properties10.1016/j.ceramint.2019.01.055 ↗
42. Structure, mechanical and tribological properties, and oxidation resistance of TaC/a-C:H films deposited by high power impulse magnetron sputtering10.1016/j.ceramint.2020.06.284 ↗
43. Advancement of tribological properties of Ti–6Al–4V alloy fabricated by selective laser melting10.1016/j.triboint.2020.106806 ↗
44. Effect of ringer s solution on Wear and friction of stainless steel 316L after plasma electrolytic Nitrocarburising at low voltages
45. Tribological behavior of Ti-6Al-4V and Ti-6Al-7Nb alloys for Total hip prosthesis10.1155/2014/451387 ↗
46. Mechanical, corrosion, and wear performances of a biocompatible Ti-based glassy alloy10.1016/j.jnoncrysol.2020.120116 ↗
47. Influence of loose PMMA bone cement particles on the corrosion assisted wear of the orthopedic AISI 316LVM stainless steel during reciprocating sliding10.1016/j.wear.2013.01.109 ↗
48. Influence of Ti, Zr or Nb carbide adhesion layers on the adhesion, corrosion resistance and cell proliferation of titania doped hydroxyapatite to the Ti6Al4V alloy substrate, utilizable for orthopaedic implants10.1016/j.ceramint.2018.10.053 ↗
49. Process parameters optimization to maximize surface roughness using response surface methodology of TiC thin film grown by radio frequency magnetron sputtering
50. Surface integrity of TiC thin film produced by RF magnetron sputtering
51. Bidirectional properties of TiC, TiN and TiNC thin films deposited by radio frequency magnetron sputtering