journal article·2009-07

Machinability investigations in hard turning of AISI D2 cold work tool steel with conventional and wiper ceramic inserts

V.N. Gaitonde, S.R. Karnik, Luis Figueira, J. Paulo Davim

Publisher page

Abstract

Hard turning with ceramic cutting tool has several benefits over grinding process such as elimination of coolant, reduced processing costs, improved material properties, reduced power consumption and increased productivity. Despite its significant advantages, hard turning can not replace all grinding due to lack of data concerning surface quality and tool wear and hence there is a need to study the machinability characteristics in high precision and high-hardened components. An attempt has been made in this paper to analyze the effects of depth of cut and machining time on machinability aspects such as machining force, power, specific cutting force, surface roughness and tool wear using second order mathematical models during turning of high chromium AISI D2 cold work tool steel with CC650, CC650WG and GC6050WH ceramic inserts. The experiments were planned as per full factorial design (FFD). From the parametric analysis, it is revealed that, the CC650WG wiper insert performs better with reference to surface roughness and tool wear, while the CC650 conventional insert is useful in reducing the machining force, power and specific cutting force.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Turning versus grinding–a comparison of surface integrity aspects and attainable accuracies10.1016/S0007-8506(07)62387-7 ↗
2. Cutting of hardened steel10.1016/S0007-8506(07)63455-6 ↗
3. Tool wear and surface integrity in hard turning
4. Hard turning–Influence on the workpiece properties
5. Identification of cutting errors in precision hard turning process10.1016/j.jmatprotec.2004.04.331 ↗
6. Surface Integrity in finish hard turning of case hardened steels10.1016/S0890-6955(02)00141-4 ↗
7. Technology key to mold making success
8. High-speed milling of dies and molds in their hardened state10.1016/S0007-8506(07)60775-6 ↗
9. Advancing cutting technology10.1016/S0007-8506(07)60200-5 ↗
10. Capability profile of hard cutting and grinding processes10.1016/S0007-8506(07)60018-3 ↗
11. Comparative study of hard turned and cylindrically ground white layers10.1016/j.ijmachtools.2003.10.009 ↗
12. Cutting forces modeling considering the effect of tool thermal property–application to CBN hard turning10.1016/S0890-6955(02)00185-2 ↗
13. Tool wear mechanism in continuous cutting of hardened tool steels10.1016/S0043-1648(97)00139-7 ↗
14. Experimental investigation on CBN turning of hardened AISI 52100 steel10.1016/S0924-0136(02)00180-2 ↗
15. Effect of cutting edge geometry and workpiece hardness on surface generation in the finish hard turning of AISI 52100 steel10.1016/S0924-0136(99)00111-9 ↗
16. Effect of cutting edge geometry and workpiece hardness on surface residual stresses in finish hard turning of AISI 52100 steel10.1115/1.1286369 ↗
17. Effects of cutting edge geometry, workpiece hardness, feed rate and cutting speed on surface roughness and forces in finish turning of hardened AISI H13 steel
18. The influence of the microstructure of hardened tool steel workpiece on the wear of PCBN cutting tools10.1016/S0890-6955(02)00170-0 ↗
19. Surface integrity of die material in high-speed hard machining, Part 1, Micro graphical analysis10.1115/1.1286367 ↗
20. Surface integrity of die material in high-speed hard machining, Part 2, Micro hardness variations and residual stresses10.1115/1.1286557 ↗
21. Tool wear and surface integrity during high-speed turning hardened steel with polycrystalline cubic boron nitride tools10.1243/0954405011518700 ↗
22. Tool nose radius effects on finish turning10.1016/j.jmatprotec.2003.10.029 ↗
23. Turning of hardened 100Cr6 bearing steel with ceramic and PCBN cutting tools10.1016/S0924-0136(03)00346-7 ↗
24. Machinability of hardened steel using alumina based ceramic cutting tools10.1016/S0263-4368(03)00004-0 ↗
25. Hard turning AISI 4340 high strength low alloy steel and AISI D2 cold work steel10.1016/j.jmatprotec.2005.04.082 ↗
26. Comparative assessment of surface roughness produced by hard machining with mixed ceramic tools including 2D and 3D analysis10.1016/j.jmatprotec.2005.04.080 ↗
27. Hard turning of quenched alloy steel parts using conventional and wiper ceramic inserts10.1016/j.ijmachtools.2006.01.009 ↗
28. Advanced tool edge geometry for high precision hard turning10.1016/S0007-8506(07)60046-8 ↗
29. Influence of tool wear on surface roughness in hard turning using differently shaped ceramic tools10.1016/j.wear.2007.11.001 ↗
30. Feasibility of producing optimal surface integrity by process design in hard turning10.1016/j.msea.2004.12.012 ↗
31. Effect of tool wear on surface finish for a case of continuous and interrupted hard turning10.1016/j.jmatprotec.2005.04.119 ↗
32. Hard turning of interrupted surfaces using CBN tools10.1016/j.jmatprotec.2007.05.022 ↗
33. Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks10.1016/j.ijmachtools.2004.09.007 ↗
34. Comparing statistical models and artificial networks on predicting the tool wear in hard machining D2 AISI steel10.1007/s00170-007-0999-7 ↗
35. Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques10.1016/j.matdes.2006.01.011 ↗
36. Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts10.1016/j.jmatprotec.2007.01.021 ↗
37. Comparative evaluation of conventional and wiper ceramic tools on cutting forces, surface roughness and tool wear in hard turning AISI D2 steel10.1243/09544054JEM762 ↗
38. Montgomery · 1997