High temperature creep behavior of Ni-based single crystal superalloy with different structured film cooling holes

1. The hotter the engine, the better10.1126/science.1179327 ↗

2. Combustor technology of high temperature rise for aero engine10.1016/j.paerosci.2023.100927 ↗

3. Multiscale analysis of thermomechanical stresses in double wall transpiration cooling systems for gas turbine blades10.1016/j.ijmecsci.2021.106657 ↗

4. Impact of radiative heat flux on turbine blade heat transfer in high temperature environments10.1016/j.applthermaleng.2022.118505 ↗

5. Evaluation of microstructural degradation in a failed gas turbine blade due to overheating10.1016/j.engfailanal.2019.04.021 ↗

6. A critical review on gas turbine cooling performance and failure analysis of turbine blades10.1016/j.ijft.2023.100329 ↗

7. Han · 2012

8. Recent advances in film cooling enhancement: a review10.1016/j.cja.2019.12.023 ↗

9. Effects of hole geometry and density on three-dimensional film cooling10.1016/0017-9310(74)90007-6 ↗

10. A Review of shaped hole turbine film-cooling technology10.1115/1.1860562 ↗

11. S. Ekkad, J.C. Han, A Review of Hole Geometry and Coolant Density Effect on Film Cooling, in: S. Ekkad, J.C. Han (Eds.) ASME 2013 Heat Transfer Summer Conference collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology, 2013.

12. Film cooling and stress concentration properties of the backward-diffusion elliptical hole10.1016/j.applthermaleng.2024.122713 ↗

13. Effect of hole configurations on film cooling performance10.1080/10407782.2019.1608762 ↗

14. Numerical study on the cooling characteristics of cat-ear-shaped film-cooling holes on turbine blades10.1016/j.csite.2022.102050 ↗

15. Experimental and computational investigation of shaped film cooling holes designed to minimize inlet separation10.1115/1.4062460 ↗

16. Experimental verification of rotating detonation engine with film cooling

17. Prediction method for creep life of thin-wall specimen with film cooling holes in Ni-based single-crystal superalloy10.1016/j.ijmecsci.2018.04.018 ↗

18. Tensile behavior of single-crystal superalloy with different structured cooling holes10.1016/j.ijmecsci.2022.107514 ↗

19. The inter-hole interference on creep deformation behavior of nickel-based single crystal specimen with film-cooling holes10.1016/j.ijmecsci.2019.105090 ↗

20. Slip band evolution behavior near circular hole on single crystal superalloy: experiment and simulation10.1016/j.ijplas.2023.103600 ↗

21. Crystal plasticity analysis of cylindrical holes and their effects on the deformation behavior of Ni-based single-crystal superalloys with different secondary orientations10.1016/j.ijplas.2019.04.009 ↗

22. Study on high temperature creep mechanical properties of nickel-based single crystal double-wall cooling structure with different wall thickness ratios10.1016/j.engfracmech.2025.111073 ↗

23. High temperature tensile behavior of a thin-walled Ni based single-crystal superalloy with cooling hole: In-situ experiment and finite element calculation10.1016/j.jallcom.2018.12.232 ↗

24. Slip system-resolved GNDs and SEDs: a multi-scale framework for predicting crack nucleation in single-crystal metals10.1016/j.actamat.2025.120853 ↗

25. A dislocation-based damage-coupled constitutive model for single crystal superalloy: Unveiling the effect of secondary orientation on creep life of circular hole10.1016/j.ijplas.2024.103874 ↗

26. Fatigue assessment of inclined film cooling holes in nickel-based single-crystal superalloy10.2514/1.J064178 ↗

27. Improving the fatigue property of diffusive film cooling holes in nickel-based single crystal superalloy via ultrashort pulse laser drilling coupled with abrasive flow machining10.1016/j.jmatprotec.2024.118411 ↗

28. Equivalent method of evaluating mechanical properties of perforated Ni-based single crystal plates using artificial neural networks10.1016/j.cma.2019.112725 ↗

29. High cycle fatigue life prediction model based on crystal plasticity and continuum damage mechanics for Ni-based single crystal superalloys under a multiaxial stress state10.1016/j.ijplas.2023.103526 ↗

30. Creep-fatigue rupture mechanism and microstructure evolution around film-cooling holes in nickel-based DS superalloy specimen10.1016/j.intermet.2021.107359 ↗

31. Crystal plasticity analysis of fatigue-creep behavior at cooling holes in single crystal Nickel based gas turbine blade components10.1016/j.ijplas.2023.103589 ↗

32. A phase-field fracture model for creep-fatigue behavior10.1016/j.tafmec.2024.104483 ↗

33. Vibration fatigue assessment and crack propagation mechanism of directionally solidified superalloy with film cooling holes10.1016/j.ijfatigue.2024.108456 ↗

34. Vibration fatigue behavior and failure mechanism of Ni-based single-crystal film cooling hole structure under high temperature10.1016/j.ijfatigue.2024.108646 ↗

35. Thermal fatigue failure analysis and life assessment of Ni-based single crystal superalloys with film cooling holes10.1016/j.engfracmech.2024.110036 ↗

36. Deformation and cracking near a hole in an oxide-forming alloy foil subjected to thermal cycling10.1016/j.actamat.2012.09.077 ↗

37. Tensile and bending thermo-mechanical fatigue testing on cylindrical and flat specimens of CMSX-4 for design of turbine blades10.1016/j.ijfatigue.2007.01.058 ↗

38. Mechanical fatigue testing under thermal gradient and manufacturing variabilities in nickel-based superalloy parts with air-cooling holes10.1007/s11340-022-00868-0 ↗

39. Thermomechanical fatigue and life prediction method of a precision cast superalloy with electrical discharge machining drilled holes10.1016/j.ijfatigue.2022.107253 ↗

40. M. Tanaka C. Mercer Y. Kagawa A.G. Evans Thermomechanical Fatigue Damage Evolution in a Superalloy/thermal Barrier System Containing a Circular through Hole 94 2011 s128 s135.10.1111/j.1551-2916.2011.04539.x ↗

41. Creep/fatigue accelerated failure of Ni-based superalloy turbine blade: microscopic characteristics and void migration mechanism10.1016/j.ijfatigue.2021.106558 ↗

42. Creep failure of low pressure turbine blade of an aircraft engine10.1016/j.engfailanal.2011.03.010 ↗

43. Creep properties and life model of anisotropic Ni-based single crystal superalloys over a wide temperature range10.1016/j.ijmecsci.2023.108674 ↗

44. Failure analysis of gas and wind turbine blades: a review10.1016/j.engfailanal.2023.107107 ↗

45. Effect of film-hole configuration on creep rupture behavior of a second generation nickel-based single crystal superalloys10.1016/j.matchar.2017.06.019 ↗

46. Microstructure evolution mechanisms in nickel-based single crystal superalloys under multiaxial stress state10.1016/j.jallcom.2019.05.143 ↗

47. Anisotropic creep fracture mechanism and microstructural evolution in nickel-based single crystal specimen with a center film hole10.1016/j.tafmec.2020.102680 ↗

48. The creep behaviors of single crystal Ni-based superalloys with slant film cooling holes10.1016/j.intermet.2023.108026 ↗

49. Crystal plasticity study of the effect of asymmetric structure of diffusive film cooling hole on heterogeneous creep and fracture behavior of NBSC superalloy10.1016/j.jmrt.2023.10.222 ↗

50. Modified crystal plasticity constitutive model considering tensorial properties of microstructural evolution and creep life prediction model for Ni-based single crystal superalloy with film cooling hole10.1016/j.ijplas.2024.104150 ↗

51. Femtosecond laser high-quality drilling of film cooling holes in nickel-based single superalloy for turbine blades with a two-step helical drilling method10.1016/j.jmatprotec.2022.117827 ↗

52. Creep rupture mechanism and microstructure evolution around film-cooling holes in nickel-based single crystal superalloy specimen10.1016/j.engfracmech.2020.107187 ↗

53. Slip analysis in a Ni-base superalloy10.1016/j.actamat.2005.01.025 ↗

54. Notch effect and its mechanism during creep rupture of nickel-base single crystal superalloys10.1016/j.msea.2009.04.060 ↗

55. Void growth and coalescence in fcc single crystals10.1016/j.ijmecsci.2010.03.001 ↗

56. Rabotnov · Creep Problems in Structural Members · 1970 · 249

57. Kachanov · 1986

58. Advances in multiaxial fatigue

59. Creep life prediction of Ni‐based single‐crystal superalloy plate with film‐cooling holes using a modified critical distance method based on the improved weight function10.1111/ffe.14169 ↗

60. Exploring the evolution and damage behaviors of multidimensional defects surrounding film holes in single-crystal nickel-based superalloys10.1007/s10853-024-09971-0 ↗

61. Damage accumulation during creep deformation of a single crystal superalloy at 1150°C10.1016/j.msea.2006.11.101 ↗

62. Damage and fracture mechanism of a nickel-based single crystal superalloy during creep at moderate temperature10.1016/j.msea.2013.11.049 ↗

63. A dislocation based criterion for the raft formation in nickel-based superalloys single crystals10.1016/0956-7151(94)00432-H ↗

64. Degradation effects of the rafts and dislocation network on creep property of single crystal superalloy at medium temperature10.1016/j.vacuum.2024.113904 ↗

65. Influence of coarsened and rafted microstructures on the thermomechanical fatigue of a Ni-base superalloy10.1016/j.ijfatigue.2015.08.001 ↗

66. Study on oxidation-creep behavior of a Ni-based single crystal superalloy based on crystal plasticity theory10.1016/j.msea.2022.142834 ↗

67. Oxidation-induced recrystallization and damage mechanism of a Ni-based single-crystal superalloy during creep10.1016/j.matchar.2022.112465 ↗