Non-layer-wise multimodal fracture and deformation mechanism in scaled Ti-6Al-4 V honeycomb porous structures

1. Pore engineering of porous materials: effects and applications10.1021/acsnano.4c08708 ↗

2. Structure design of porous TC4 alloy with excellent mechanical properties prepared by laser-powder bed fusion10.1016/j.vacuum.2023.112818 ↗

3. Hierarchal design, axial compression behaviors and elastoplastic analyses of additively manufactured IsoTruss cylinders10.1016/j.compositesb.2025.113321 ↗

4. Binder jetting: a review of process, materials, and methods

5. Influence of the layer thickness on the dimensional accuracy and mechanical properties of lattice structures during PBF-LB of AlSi10Mg

6. Effect of powder bed fusion laser melting process parameters, build orientation and strut thickness on porosity, accuracy and tensile properties of an auxetic structure in IN718 alloy

7. Effect of designed pore size on electrochemical, wear, and tribocorrosion behavior of additively manufactured Ti-6Al-4V lattice structures

8. Effects of ultrasonic shot peening process on the microstructure and mechanical properties of nickel-based superalloys formed by selective laser melting10.1016/j.jmatprotec.2024.118667 ↗

9. Cu alloying enabling dual biocorrosion suppression and fatigue crack mitigation in SLM-processed titanium implants with retained osteogenic activity10.1016/j.jmst.2025.06.006 ↗

10. Stability of an elastic honeycomb under out-of-plane compression10.1016/j.ijsolstr.2025.113588 ↗

11. Advanced honeycomb designs for improving mechanical properties: A review10.1016/j.compositesb.2021.109393 ↗

12. Geometry design and in-plane compression performance of novel origami honeycomb material10.1016/j.tws.2022.110111 ↗

13. Early plastic deformation behaviour and energy absorption in porous β-type biomedical titanium produced by selective laser melting10.1016/j.scriptamat.2018.05.010 ↗

14. Microstructural and mechanical analysis of TiCN-reinforced AlMgScZr composites fabricated via laser powder bed fusion: Insights into triple periodic minimal surface lattice structures10.1016/j.jmst.2025.04.051 ↗

15. Mechanical properties of additively manufactured AlSi10Mg alloy gradient honeycomb with rib reinforcement at different strain rates10.1016/j.tws.2024.112821 ↗

16. Enhanced fatigue characteristics of a topology-optimized porous titanium structure produced by selective laser melting

17. Deformation evolution and fracture mechanism of porous TC4 alloy scaffolds fabricated using selective laser melting under uniaxial compression10.1016/j.jallcom.2020.158529 ↗

18. Non-layer-wise fracture and deformation mechanism in beta titanium cubic lattice structure manufactured by selective laser melting10.1016/j.msea.2021.141696 ↗

19. Microstructure-dependent deformation mechanisms and fracture modes of gradient porous NiTi alloys10.1016/j.matdes.2024.113049 ↗

20. Comparison of the microstructures and mechanical properties of Ti-6Al-4V fabricated by selective laser melting and electron beam melting10.1016/j.matdes.2015.12.135 ↗

21. Rapid solidification: selective laser melting of AlSi10Mg10.1007/s11837-015-1763-3 ↗

22. Additive manufacturing of multi-morphology graded titanium scaffolds for bone implant applications10.1016/j.jmst.2022.07.035 ↗

23. Ti6Al4V biomimetic scaffolds for bone tissue engineering: Fabrication, biomechanics and osseointegration10.1016/j.matdes.2023.112330 ↗

24. A modified J-C constitutive model and novel strain rate-dependent fracture criterion for A7N01S-T5 under different loading10.1016/j.ijimpeng.2025.105442 ↗

25. A review of deformation and fragmentation behavior of high-strength steels under impact: mechanisms, models, and future directions10.1016/j.ijimpeng.2025.105466 ↗

26. A review on Johnson Cook material model

27. Numerical study of the deformation and fracture behavior of porous Ti6Al4V alloy under static and dynamic loading10.1016/j.ijimpeng.2014.08.011 ↗

28. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures10.1016/0013-7944(85)90052-9 ↗

29. Sheet and network based functionally graded lattice structures manufactured by selective laser melting: design, mechanical properties, and simulation10.1016/j.ijmecsci.2020.105480 ↗

30. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements10.1016/0008-8846(76)90007-7 ↗

31. Investigation into the microstructure and dynamic compressive properties of selective laser melted Ti-6Al-4V alloy with different heating treatments10.1016/j.msea.2020.140561 ↗

32. Effective design of the graded strut of BCC lattice structure for improving mechanical properties10.3390/ma12132192 ↗

33. Investigation into the dynamic mechanical properties of selective laser melted Ti-6Al-4V alloy at high strain rate tensile loading10.1016/j.msea.2019.01.010 ↗

34. Selective laser melting (SLM) of AlSi12Mg lattice structures10.1016/j.matdes.2016.02.127 ↗

35. Effects of the unit cell topology on the compression properties of porous Co-Cr scaffolds fabricated via selective laser melting10.1108/RPJ-08-2015-0114 ↗

36. A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications10.1016/j.jmapro.2011.01.004 ↗

37. Influence of cell shape on mechanical properties of Ti-6Al-4V meshes fabricated by electron beam melting method10.1016/j.actbio.2014.06.010 ↗

38. Mechanical evaluation of porous titanium10.1016/j.jmbbm.2009.10.006 ↗

39. Structural design and mechanical response of gradient porous Ti-6Al-4V fabricated by electron beam additive manufacturing10.1016/j.matdes.2018.08.027 ↗

40. Low-density, high-strength metal mechanical metamaterials beyond the Gibson-Ashby model10.1016/j.mattod.2023.07.018 ↗

41. Effects of porosity gradient pattern on mechanical performance of additive manufactured Ti-6Al-4V functionally graded porous structure10.1016/j.matdes.2021.109911 ↗

42. Titanium multi-topology metamaterials with exceptional strength

43. Preparation and mechanical properties analysis of porous structure for bone tissue engineering

44. Properties of additive-manufactured open porous titanium structures for patient-specific load-bearing implants10.3389/fmech.2021.830126 ↗

45. Quantitative evaluation on mechanical characterization of Ti6Al4V porous scaffold designed based on Weaire-Phelan structure via experimental and numerical analysis methods10.1016/j.jallcom.2021.160234 ↗

46. Design of a novel trabecular acetabular cup and selective laser melting fabrication10.3390/ma15176142 ↗

47. The influence of chemical etching on porous structure and mechanical properties of the Ti6AL4V functionally graded porous scaffolds fabricated by EBM10.1016/j.matchemphys.2021.125217 ↗

48. Additive manufacturing design approach to strut-based functionally graded porous structures for personalized implants10.1016/j.jmapro.2022.10.045 ↗

49. Ti-6Al-4V hollow-strut lattice materials by laser powder bed fusion

50. Ti64/20Ag porous composites fabricated by powder metallurgy for biomedical applications10.3390/ma15175956 ↗

51. Boundary integrity-based Gyroid minimal surface NiTi porous structure achieved through non-proportionally scaled deformation method with superior mechanical property

52. Additive manufacturing of bio-inspired multi-scale hierarchically strengthened lattice structures10.1016/j.ijmachtools.2021.103764 ↗

53. Mechanical and shape memory properties of porous Ni50.1Ti49.9 alloys manufactured by selective laser melting10.1016/j.jmbbm.2017.01.047 ↗

54. Microstructure, shape memory properties, and in vitro biocompatibility of porous NiTi scaffolds fabricated via selective laser melting10.1016/j.jmrt.2021.11.112 ↗

55. Numerical and experimental study of porous NiTi anisotropy under compression10.1016/j.jmrt.2022.12.168 ↗

56. Mechanical and shape memory properties of NiTi triply periodic minimal surface structures fabricated by laser powder bed fusion10.1016/j.jmapro.2023.06.034 ↗

57. Microstructure and mechanical properties of porous NiTi alloy prepared by integration of gel-casting and microwave sintering10.3390/ma15207331 ↗

58. Compression behavior and failure mechanisms of bionic porous NiTi structures built via selective laser melting10.1007/s40195-023-01523-w ↗

59. Mechanical and electrochemical properties of porous NiTi intermetallics synthesized via rapid thermal explosion10.1016/j.intermet.2023.108162 ↗

60. Fabrication of porous TiZrNbTa high-entropy alloys/Ti composite with high strength and low Young’s modulus using a novel MgO space holder10.1016/j.jmst.2023.05.039 ↗

61. Porous bio-high entropy alloy scaffolds fabricated by direct ink writing10.1016/j.jmst.2023.02.015 ↗

62. The microstructure, mechanical properties and in-vitro biological compatibility of porous Ti-40Nb alloy fabricated by spark plasma sintering

63. Manufacturability of lattice structures fabricated by laser powder bed fusion: a novel biomedical application of the beta Ti-21S alloy

64. Effects of Mo contents on the microstructure, properties and cytocompatibility of the microwave sintered porous Ti-Mo alloys10.1016/j.msec.2018.12.028 ↗

65. Porous Ti alloy with enhanced mechanical property prepared via chemical dealloying combined subsequent molten salt electrolysis10.1016/j.msea.2022.143785 ↗

66. Evolution of microstructural complex transitions in low-modulus β-type Ti-35Nb-2Ta-3Zr alloy manufactured by laser powder bed fusion

67. Pore strategy design of a novel NiTi-Nb biomedical porous scaffold based on a triply periodic minimal surface10.3389/fbioe.2022.910475 ↗

68. Design of bone-like continuous gradient porous scaffold based on triply periodic minimal surfaces10.1016/j.jmrt.2022.10.160 ↗

69. Ultrahigh-strength titanium gyroid scaffolds manufactured by selective laser melting (SLM) for bone implant applications10.1016/j.actamat.2018.08.005 ↗

70. G. Lütjering, J.C. Williams, Titanium, Springer Science & Business Media, 2007.

71. Microstructural and texture evolution investigation of laser melting deposited TA15 alloy at 500℃ using in-situ EBSD tensile test10.1016/j.msea.2022.144062 ↗

72. In situ EBSD study of deformation behavior of primary α phase in a bimodal Ti-6Al-4V alloy during uniaxial tensile tests10.1016/j.matchar.2020.110282 ↗