Effect of temperature and holding time on Steam-Side oxide scale damage of TP347H tubes
Source abstract
Abstract
The spallation of steam-side oxide scales on boiler tubes poses a serious threat to the safe operation of power plants. In this study, the damage behavior of steam-side oxide scale on TP347H tubes was systematically investigated, combined temperature-variation experiments with acoustic emission (AE) monitoring. By correlating AE parameters (energy and amplitude) with metallographic observations, the damage stages and initiation point were identified, and a relationship between AE signal characteristics and damage types was established. In addition, the cumulative AE energy was compared under different temperatures and holding times. The effects of temperature and holding time on oxide scale damage were thereby clarified. The results reveal that damage predominantly occurs during the cooling stage, whereas no significant damage is observed during the heating and holding stages. The thermal stress induced by temperature decrease is the primary driving force. The temperature is the dominant factor effecting oxide scale damage, and a critical temperature of 650 °C is identified, above which prolonged holding significantly accelerates damage, accompanied by increased AE energy and oxide scale spallation. An AE-based characterization method is therefore proposed, providing a practical approach for in-situ monitoring and life assessment of oxide scale in boiler tubes.
Source: openaire · Quality: candidate unverified · Source record ↗
References (38)
Show source-provided references
1. Corrosion behavior of 20G and TP347H in molten LiCl-NaCl-KCl salt10.3390/nano14121026 ↗
2. Electrochemical noise analysis of the hot corrosion of TP347H stainless steel: effect of temperature and coal ash thickness10.1016/j.electacta.2025.146105 ↗
3. Molecular dynamics, thermodynamics and experimental studies on the corrosion mechanism of T92 and TP347H steels in high-pressure CO2 and H2O at 600 °C10.1016/j.apsusc.2023.156879 ↗
4. The effect of dissolved oxygen on the oxidation of an austenitic steel in supercritical water10.1080/09603409.2021.2012958 ↗
5. The process of steam oxidation degradation of high Cr steel after 125 000 hours at 568 °C under 16.5 MPa10.1007/s11665-024-09881-x ↗
6. Failure behavior analysis of oxide film formed on super-heater tubes of boiler during deep peak process10.1016/j.supflu.2024.106474 ↗
7. Insight into the failure and healing of oxide scales during cyclic oxidation of powder metallurgy superalloy with various Nb content10.1016/j.jallcom.2024.175927 ↗
8. Oxide stress and fracture susceptibility on a surface gradient microstructure of an additively manufactured steel10.1016/j.actamat.2025.121779 ↗
9. Novel method for predicting the cracks of oxide scales during high temperature oxidation of metals and alloys by using machine learning10.1038/s41598-025-91449-3 ↗
10. M. Nurbanasari, Abdurrachim, B. Pramono, I.G. Darmadi, I.T. Saputro, G. Gumilar, A. Ekajati, Failure study of secondary superheater tube out header damage in a 600-MW coal power plant, Eng. Fail. Anal. 150 (2023) 107349, https://doi.org/10.1016/j.engfailanal.2023.107349.10.1016/j.engfailanal.2023.107349 ↗
11. Oxidation behaviour of austenitic stainless steel 304HCu in Advanced Ultra Supercritical (AUSC) steam and the efficacy of shot-peening treatment10.1016/j.corsci.2024.112214 ↗
12. Computational fluid dynamics study of erosion on 900 MW steam turbine ND-45 blades using 3D scanning10.3390/ma17194884 ↗
13. On the failure of steam-side oxide scales in high temperature components of boilers during unsteady thermal processes10.1016/j.jlp.2012.08.004 ↗
14. Failure analysis of leakage in high-temperature superheater tubes of a deep peak regulation supercritical boiler TP347H
15. Influence of temperature on the oxide spallation of T91 alloy superheater tubes in power plant10.1016/j.applthermaleng.2017.08.139 ↗
16. Oxide scale exfoliation and regrowth in TP347H superheater tubes10.1002/maco.201206640 ↗
17. Morphologies of oxide growth and exfoliation in superheater and reheater tubing of steam boiler10.3184/096034011X12982937656387 ↗
18. Use of acoustic emission to identify damage modes in glass fibre reinforced polyester10.1016/S0266-3538(02)00087-8 ↗
19. Acoustic emission monitoring of damage progression in Glass/Epoxy composites during static and fatigue tensile tests10.1016/j.apacoust.2017.11.017 ↗
20. Using acoustic emission parameters to study damage and fracture characteristics of concrete with different pour intervals cold joints10.1016/j.tafmec.2022.103601 ↗
21. Real-time acoustic emission detection of damage mode and failure of EB-PVD thermal barrier coating under CMAS and sea salt corrosion10.1016/j.jeurceramsoc.2025.117404 ↗
22. Study on mechanical performance and damage characteristics of Semi-Flexible Pavement materials based on acoustic emission tests10.1016/j.conbuildmat.2025.144422 ↗
23. Damage mechanisms assessment of Glass Fiber-Reinforced Polymer (GFRP) composites using multivariable analysis methods applied to acoustic emission data10.1016/j.compstruct.2022.115470 ↗
24. Experimental and numerical analysis of crack evolution in concrete through acoustic emission technique and mesoscale modelling10.1016/j.engfracmech.2016.03.044 ↗
25. Condition monitoring in reaming through acoustic emission signals10.1016/S0924-0136(98)00237-4 ↗
26. Shear behavior and damage identification of π-shaped demountable connector for composite beam equipped with acoustic emission sensors10.1016/j.conbuildmat.2025.143811 ↗
27. Computational analysis of tube wall temperature of superheater in 1000 MW ultra-supercritical boiler based on the inlet thermal deviation10.3390/en16031539 ↗
28. A.G. Evans, J.W. Hutchinson, The thermomechanical integrity of thin films and multilayers, Acta Metall. Mater. 43 (1995) 2507-2530, https://doi.org/10.1016/0956-7151(94)00444-M.10.1016/0956-7151(94)00444-M ↗
29. L.B. Freund, S. Suresh, Thin Film Materials: Stress, Defect Formation and Surface Evolution, Cambridge University Press, Cambridge, 2004, https://doi.org/10.1017/CBO9780511754715.10.1017/CBO9780511754715 ↗
30. Failure evolution of steam-side oxide scales grown on T91 superheater tubes by acoustic emission technique10.1002/maco.201609336 ↗
31. Stress effects in high temperature oxidation of metals10.1179/imr.1995.40.1.1 ↗
32. The lateral growth strain accompanying the formation of a thermally grown oxide10.1016/S1359-6454(02)00532-3 ↗
33. C.U. Grosse, M. Ohtsu (Eds.), Acoustic Emission Testing: Basics for Research–Applications in Civil Engineering, Springer, Berlin, Heidelberg, 2008, https://doi.org/10.1007/978-3-540-69972-9.10.1007/978-3-540-69972-9 ↗
34. Mechanisms controlling the durability of thermal barrier coatings10.1016/S0079-6425(00)00020-7 ↗
35. Effect of interface undulations on the thermal fatigue of thin films and scales on metal substrates10.1016/S1359-6454(97)00062-1 ↗
36. Acoustic emission energy as a fatigue damage parameter for CFRP composites10.1016/j.ijfatigue.2006.05.009 ↗
37. Cumulative acoustic emission energy for damage detection in composites reinforced by carbon fibers within low-cycle fatigue regime at various displacement amplitudes and rates
38. Analysis of acoustic emission energy from reinforced concrete sewage pipeline under full-scale loading test10.3390/app12178624 ↗