Effect of V content on microstructure evolution, mechanical property and hydrogen embrittlement behavior of welded joint produced by laser welding of interstitial free steel

1. Exploration of the high-cycle fatigue properties of Al-rich interstitial free steels stabilized by Ti and Nb10.1016/j.ijfatigue.2024.108674 ↗

2. Current research progress in liquid metal embrittlement of galvanized advanced high-strength steels during resistance spot welding10.1016/j.jmapro.2026.03.015 ↗

3. Dynamic grain growth driven by subgrain boundaries in an interstitial-free steel during deformation at 850 °C

4. Effect of laser beam welding on microstructure, tensile strength and fatigue behaviour of duplex stainless steel 220510.1016/j.jmapro.2021.10.020 ↗

5. Multi-physics multi-scale simulation of unique equiaxed-to-columnar-to-equiaxed transition during the whole solidification process of Al-Li alloy laser welding10.1016/j.jmst.2023.05.077 ↗

6. Achieving high strength of dissimilar TC4/304 stainless steel joints by laser welding using a novel V/CuCrZr/CoCrNi composite layer10.1002/srin.202500105 ↗

7. Effect of silicon on microstructure and wear properties of bainite high vanadium wear-resistant alloy10.1016/j.wear.2025.205784 ↗

8. In-situ composite formation of vanadium carbide in CrFeCoNiCu high-entropy alloy cladded on AISI304 stainless steel10.1016/j.jmrt.2025.02.051 ↗

9. Study on hot flow behaviors and deformation/diffusion mechanisms of V and V–Ti microalloyed steels by physical constitutive modeling10.1002/srin.202200847 ↗

10. Mechanistic role of vanadium microalloying in improving corrosion resistance of low carbon bainitic steel10.1016/j.jmrt.2024.09.149 ↗

11. A comparative study on hot deformation behaviours of low-carbon and medium-carbon vanadium microalloyed steels10.1016/j.jmrt.2020.08.016 ↗

12. Effects of vanadium content on the high temperature oxidation behavior of NbTiZrAlV refractory complex concentrated alloys10.1016/j.jallcom.2022.164180 ↗

13. Phase-transformation and precipitation kinetics in vanadium micro-alloyed steels by in situ, simultaneous neutron diffraction and SANS10.1016/j.actamat.2021.117317 ↗

14. Effect of NbC and VC carbides on microstructure and strength of high-strength low-alloyed steels for oil country tubular goods10.1016/j.msea.2021.141845 ↗

15. Composition optimization of high-strength steels for sulfide stress cracking resistance improvement10.1016/j.corsci.2009.08.013 ↗

16. Effect of titanium microalloying on microstructure and mechanical properties of vanadium microalloyed steels for hot forging10.1007/s42243-021-00629-8 ↗

17. Effect of vanadium content on hydrogen embrittlement of 1400 MPa grade high strength bolt steels10.1016/j.ijhydene.2021.08.060 ↗

18. X.T. Wu, L.H. Su, A.K. Tieu, J. Cheng, C. Nguyen, H.T. Zhu, J. Yang, G.Y. Deng, Impact of vanadium (V) content on in-situ oxidation, high temperature mechanical strength and tribological properties of Al0.5CrFeNiVx entropy alloys, Tribol. Int. 202(2025) 110375. doi: 10.1016/j.triboint.2024.110375.10.1016/j.triboint.2024.110375 ↗

19. Effect of vanadium content on microstructure, mechanical properties, and oxidation behavior of novel high temperature complex alloy10.1016/j.intermet.2025.108672 ↗

20. Z. Dong, C.Q. Fu, B.Q. Dong, X.R. Nóvoa, U. Angst. Effect of static and dynamic tensile stress changes on carbon steel passivation in alkaline environment. Electrochim. Acta. 538 (2025) 146996. doi: 10.1016/j.electacta.2025.146996.10.1016/j.electacta.2025.146996 ↗

21. Effect of annealing temperature on microstructure and properties of stainless steel/copper composite strips10.1007/s42114-026-01648-3 ↗

22. Microstructures andmechanical properties analysis ofTiAl joints using novel brazing filler metal10.1007/s40194-025-02210-3 ↗

23. From microcracks to fractures: A unified micromechanics-based framework for quasi-brittle failure10.1016/j.ijplas.2026.104709 ↗

24. Physical metallurgy-guided machine learning and artificial intelligent design of ultrahigh-strength stainless steel10.1016/j.actamat.2019.08.033 ↗

25. Corrosion behavior of high strength steel welded joint in seawater: a combinatorial study based on general and localized electrochemical methods10.1007/s11665-022-07699-z ↗

26. The effect of hydrogen on stress corrosion behavior of X65 steel welded joint in simulated deep sea environment10.1016/j.oceaneng.2016.01.020 ↗

27. Very high cycle fatigue of a high strength steel under sea water corrosion: A strong corrosion and mechanical damage coupling10.1016/j.ijfatigue.2015.01.004 ↗

28. An analysis of the tribological mechanism of GLC film in artificial seawater10.1039/C6RA03532A ↗

29. Interfacial microstructure and corrosion behaviors of TC4/DP780 steel joints by laser welding with H62 interlayer10.1016/j.jmrt.2024.02.140 ↗

30. Galvanic corrosion of AA5052/304SS welded joint with Zn-based filler metal in marine engineering10.1016/j.corsci.2022.110912 ↗

31. Insight into the corrosion susceptibility and failure mechanism of Cu-Ni alloy pipeline welded joints in simulated marine environment

32. Microstructure and corrosion behavior of welded joint between 2507 super duplex stainless steel and E690 low alloy steel10.1016/j.corcom.2022.08.005 ↗

33. Corrosion behavior and mechanism of X80 pipeline steel welded joints under high shear flow fields10.1016/j.colsurfa.2023.131225 ↗

34. The corrosion response of the heterogeneous nitriding structure originated from the laser additive manufactured steel10.1016/j.corsci.2023.111188 ↗

35. Effect of hydrogen charging on the mechanical properties of advanced high strength steels10.1016/j.ijhydene.2013.12.190 ↗

36. Hydrogen diffusivity and tensile-ductility loss of solution-treated austenitic stainless steels with external and internal hydrogen10.1016/j.ijhydene.2017.04.055 ↗

37. Microstructural evolution and hydrogen embrittlement susceptibility in laser-welded joints of oxidation-resistant press-hardened steel10.1016/j.ijhydene.2025.01.002 ↗

38. Atomistic simulation of hydrogen-assisted ductile-to-brittle transition in α-iron10.1016/j.commatsci.2016.10.033 ↗

39. The effect of nanosized (Ti,Mo)C precipitates on hydrogen embrittlement of tempered lath martensitic steel10.1016/j.actamat.2014.04.051 ↗

40. Effect of vanadium content on hydrogen diffusion behaviors and hydrogen induced ductility loss of X80 pipeline steel10.1016/j.msea.2018.09.048 ↗

41. Hydrogen trapping and desorption pectra analysis in 300M ultra high strength martensitic steel - an experimental and modeling study10.1016/j.ijhydene.2025.152618 ↗

42. Developing bearing steels combining hydrogen resistance and improved hardness10.1016/j.matdes.2012.07.030 ↗

43. Evaluation of the role of Mo2C in hydrogen induced ductility loss in Q&T Fe-C-Mo alloys10.1016/j.ijhydene.2016.05.176 ↗

44. Hydrogen diffusion and trapping in V-microalloyed mooring chain steels10.1016/j.matlet.2017.11.029 ↗

45. Effects of vanadium precipitates on hydrogen trapping efficiency and hydrogen induced cracking resistance in X80 pipeline steel10.1016/j.ijhydene.2018.07.110 ↗

46. Effect of initial dislocation density on hydrogen accumulation behavior in martensitic steel10.1016/j.scriptamat.2019.11.051 ↗

47. Role of Ni content on microstructure, mechanical property, and in-site local corrosion behavior of welded joints produced by laser welding of dual-phase steel10.1002/srin.202300120 ↗

48. Localized corrosion of magnesium in chloride-containing electrolyte studied by a scanning vibrating electrode technique10.1149/1.2918900 ↗

49. Cut-edge corrosion behavior assessment of newly developed environmental-friendly coating systems using the Scanning Vibrating Electrode Technique (SVET)

50. The effect of welding speed on the microstructure, mechanical properties, and fatigue failure of Q690D high-strength steel10.1016/j.engfailanal.2024.108885 ↗

51. Three-dimensional morphology of grain boundary Widmanstätten ferrite in a low carbon low alloy steel10.1016/j.matchar.2009.11.009 ↗

52. Failure analysis and the cold crack formation mechanism for the QP1180 steel welded joint10.1016/j.engfailanal.2021.105767 ↗

53. Influence of neighbourhood on abnormal Goss grain growth in Fe-3%Si steels: formation of island grains in the large growing grain10.1016/j.scriptamat.2006.06.007 ↗

54. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗

55. The use of Fourier analysis in the interpretation of X-ray line broadening from cold-worked iron and molybdenum10.1107/S0365110X54001879 ↗

56. Multi-scale three-dimensional simulation of the solidification microstructure evolution in laser welding of aluminum alloys under dynamic spatial thermal cycling10.1016/j.jmrt.2024.09.219 ↗

57. Evaluation of microstructure and texture across the welded interface of super duplex stainless steel and high strength low alloy steel10.1016/j.surfcoat.2014.12.060 ↗

58. Mechanism of twinning-induced grain boundary engineering in low stacking-fault energy materials10.1016/S1359-6454(99)00277-3 ↗

59. On improving the corrosion and growth resistance of positive Pb acid battery grids by grain boundary engineering10.1016/S0378-7753(99)00015-4 ↗

60. Effect of nitrogen protection on weld metal microstructure and intergranular behavior of S32101 duplex stainless steel 15m water depth hyperbaric laser underwater welding

61. Inhomogeneity of microstructure and mechanical properties in the interlayer regions for narrow gap laser wire filling welding of 316L stainless steel10.1016/j.optlastec.2023.110050 ↗

62. Role of trace nanoparticles in manipulating the Widmanstatten structure of low carbon steel10.1016/j.matlet.2021.130853 ↗

63. Effect of manganese and vanadium additions on the microstructures and two-body abrasive wear behaviors of Fe–B hardfacing alloys10.1016/j.intermet.2024.108309 ↗

64. Growth morphologies and primary solidification modes in a dissimilar weld between a low-alloy steel and an austenitic stainless steel10.3390/met8040284 ↗

65. High strength-ductility synergy in a laser welded dissimilar joint of CrCoNi medium-entropy alloy and stainless steel10.1016/j.msea.2022.142854 ↗

66. Mechanical performance and formability of laser-welded dissimilar butt joints between medium-Mn stainless steel and high-strength carbon steel10.1016/j.msea.2021.142200 ↗

67. Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 308 stainless steel filler metal10.1016/j.scriptamat.2022.115053 ↗

68. Modeling of microstructure evolution coupled with molten pool oscillation during electron beam welding of an Al-Cu alloy10.1016/j.ijheatmasstransfer.2022.122735 ↗

69. Effect of minor addition of vanadium on mechanical properties and microstructures of as-extruded near eutectic Al–Si–Mg alloy10.1016/j.msea.2014.02.053 ↗

70. In situ EBSD investigation of microtexture evolution and slip activation of α macrozones during tensile deformation in Ti-6Al-4V alloy10.1016/j.msea.2024.147739 ↗

71. Mechanisms underlying the marked enhancement of toughness in the CGHAZ of N-Ti weathering steel subjected to large heat input through the trace addition of vanadium10.1016/j.msea.2025.147910 ↗

72. Effect of secondary peak temperature on microstructure and toughness in ICCGHAZ of laser-arc hybrid welded X100 pipeline steel joints10.1016/j.jmrt.2020.05.016 ↗

73. Deformation behavior and fracture mechanisms of 430 ferritic stainless steel after dual-phase zone annealing via quasi in-situ tensile testing10.1016/j.msea.2024.147561 ↗

74. Synergistic enhancement of strength, ductility, and toughness in a low carbon micro-alloy steel with an ultrafine-grained heterogeneous lamellar structure10.1016/j.msea.2023.145205 ↗

75. A review of the thermal stability of metastable austenite in steels: Martensite formation10.1016/j.jmst.2021.03.020 ↗

76. Investigation of microstructure and mechanical properties in dissimilar-metal welding between ferritic stainless steel and Co-based superalloy using electron beam welding10.1016/j.jmrt.2023.08.254 ↗

77. The influence of Widmanstätten ferrite on yielding behavior of Nb-containing reinforcing steel bars10.1016/j.scriptamat.2012.05.013 ↗

78. Hydrogen embrittlement resistance enhancement in L245 pipeline steel and welded joint by laser shock peening10.1016/j.optlastec.2025.114290 ↗

79. Effect of oscillation parameters on the formation and mechanical properties of laser welded joints of QP980/DP780 dissimilar steels

80. Evaluation of microstructures and mechanical properties of deltha trip steel with different vanadium contents

81. Effect of vanadium addition to Al-Si alloy on its mechanical, tribological and microstructure properties10.1016/j.matpr.2017.01.026 ↗

82. Effect of V addition on microstructures and mechanical properties of Cu-15Ni-8Sn alloy10.1016/j.msea.2019.01.084 ↗

83. Synergizing TWIP andTRIP effects foroptimized mechanical performance viastacking fault energy control inaustenitic steels10.1007/s43452-025-01333-0 ↗

84. In situ ultrasonic characterization of hydrogen damage evolution in X80 pipeline steel10.3390/ma17235891 ↗

85. Effect of tempering temperature on stress corrosion resistance of a low alloy high strength steel with high vanadium content

86. Investigating the effects of hydrogen trapping on hydrogen environment-assisted cracking of vanadium-added steels10.1016/j.tafmec.2025.104851 ↗

87. Mixed type brittle fracture in 1.5 GPa dual-phase steel via 100 ferrite cleavage cracking10.1016/j.msea.2022.144021 ↗

88. Strengthening mechanisms in vanadium-microalloyed medium-Mn steels

89. Influence of hydrogen on the mechanical and fracture properties of some martensitic advanced high strength steels in simulated service conditions10.1016/j.corsci.2016.05.040 ↗

90. A nanoscale mechanism of hydrogen embrittlement in metals10.1016/j.actamat.2010.11.019 ↗

91. 2D modelling of the effect of grain size on hydrogen diffusion in X70 steel10.1016/j.commatsci.2012.01.003 ↗

92. The trapping and transport phenomena of hydrogen in nickel10.1007/BF02643893 ↗

93. Grain-boundary diffusion and precipitate trapping of hydrogen in ultrafine-grained austenitic stainless steels processed by high-pressure torsion10.1016/j.msea.2011.07.031 ↗

94. Is Hydrogen diffusion along grain boundaries fast or slow? atomistic origin and mechanistic modeling10.1103/PhysRevLett.122.215501 ↗

95. Localized corrosion evaluation of newly developed stainless-steel alloys in chloride medium through dynamic and localized micro electrochemical techniques10.1016/j.jmrt.2023.08.228 ↗

96. Understanding the galvanic corrosion of Cu-Ni alloy/2205 DSS couple using electrochemical noise and microelectrochemical studies10.1016/j.corsci.2023.111512 ↗

97. High contrast corrosion mapping of dissimilar metal weld joints using alternating current scanning electrochemical microscopy: A case study with Zr-4–Ti–304L SS weld10.1016/j.corsci.2023.111345 ↗

98. Effect ofvanadium addition onmicrostructure andproperties ofAl0.5Cr0.9FeNi2.5 multi‑principal alloys10.1007/s42243-020-00466-1 ↗

99. doi: 10.1007/s42243-020-00466-1.10.1007/s42243-020-00466-1 ↗

100. Influence of nanocrystallization on pitting corrosion behavior of an austenitic stainless steel by stochastic approach and in situ AFM analysis10.1016/j.electacta.2009.11.088 ↗