Experimental study on mechanical response of cutting rock breaking with worn PDC cutters
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (26)
Show source-provided references
1. Effect of cobalt content on the performance of polycrystalline diamond compacts
2. “Numerical study on optimal impact angle of a single PDC cutter in impact rock cutting”, Energy Reports
3. Analysis of PDC cutter cutting-broken conglomerate based on the discrete element method
4. Rock-breaking performance analysis of worn polycrystalline diamond compact bit
5. Experimental investigation of the rock cutting process with blunt PDC cutters
6. Experimental Study on Energy Consumption of Rock cutting under Different Groove Geometry10.1520/GTJ20180214 ↗
7. Structure Design of Bionic PDC Cutter and the Characteristics of Rock breaking Processes
8. Nishimatsu, Y. (1972), “The mechanics of rock cutting”, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 9 No. 2, pp. 261-270.10.1016/0148-9062(72)90027-7 ↗
9. Investigation of the tool-rock interaction using Drucker-Prager failure criterion(Article)10.1016/j.petrol.2018.09.064 ↗
10. Zhang · 2022
11. Research on cutting load and Heat Generation Law of PDC Wearing Cutter
12. Mechanism and Experimental Research on Rock breaking by cutting Teeth of High-speed PDC Drill bit10.3390/pr13041213 ↗
13. Xiong, C., Huang, Z., Shi, H., Chen, H., Chen, Z., He, W. & Zhang, B. (2023), “Investigations on the Stinger PDC cutter breaking granitoid under in-situ stress and hydrostatic pressure conditions”, International Journal of Rock Mechanics and Mining Sciences, No. Suppl C, pp. 105312.10.1016/j.ijrmms.2022.105312 ↗
14. Experimental Investigation into mixed Tool cutting of Granite with Stinger PDC Cutters and conventional PDC Cutters10.1007/s00603-021-02680-z ↗
15. The analysis of ductile-brittle failure mode transition in rock cutting10.1016/j.petrol.2017.12.067 ↗
16. Detournay, E. & Defourny, P. (1992), “A phenomenological model for the drilling action of drag bits”, International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, Vol. Vol.29 No. No.1, pp. 13-23.10.1016/0148-9062(92)91041-3 ↗
17. Adachi, J. I., Detournay, E. & Drescher, A. (1996), “Determination of rock strength parameters from cutting tests”, ROCK MECHANICS TOOLS AND TECHNIQUES, VOLS 1 AND 2, 1517-1523.
18. Rock cutting characteristics on soft-to-hard rocks under different cutter inclinations10.1016/j.ijrmms.2016.05.014 ↗
19. Akbari, B. B. L. E. & Miska, S. (2016), “The effects of chamfer and back rake angle on PDC cutters friction.”, Journal of Natural Gas Science & Engineering, Vol. Vol.35 No. Part A, pp. 347-353.10.1016/j.jngse.2016.08.043 ↗
20. Dagrain, F. (2007), Etude des mécanismes de coupe des roches avec couteaux usés. Approche des mécanismes de frottement par le concept du troisième corps.
21. Effect of cutting tool properties and depth of cut in rock cutting: an experimental study10.1007/s00603-018-1440-2 ↗
22. Effect of Directional Double-Tooth Structure on Rock-breaking Efficiency and Lateral Force of PDC Drill bit
23. Drilling process simulation and dynamic characteristic analysis of soft-hard-staggered strata based on Abaqus
24. Vibration failure and anti-vibration analysis of an annular-grooved PDC bit
25. The ductile–brittle failure mode transition of hard brittle rock cutting—new insights from numerical simulation10.1007/s40948-022-00438-7 ↗
26. Numerical simulation and experimental study on the interaction between a convex ring PDC bit and rock