Time-dependent thermo-elastic creep response of rotating thick cylindrical shells made of axially functionally graded materials based on the TSDT
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (100+)
Show source-provided references
1. Set of field equations for thick shell of revolution made of functionally graded materials in curvilinear coordinate system
2. Effects of material gradients on onset of yield in FGM rotating thick cylindrical shells10.1142/S1758825114500380 ↗
3. A semi-analytical solution of thick truncated cones using matched asymptotic method and disk form multilayers10.2478/meceng-2014-0029 ↗
4. Exact elasto-plastic analysis of rotating thick-walled cylindrical pressure vessels made of functionally graded materials10.1016/j.ijengsci.2014.10.002 ↗
5. Thermo-elasto-plastic analysis of thick-walled spherical pressure vessels made of functionally graded materials10.1142/S175882511650054X ↗
6. Transient thermoelastic analysis of FGM rotating thick cylindrical pressure vessels under arbitrary boundary and initial conditions
7. Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius
8. A general disk form formulation for thermo-elastic analysis of functionally graded thick shells of revolution with arbitrary curvature and variable thickness10.1007/s00707-016-1709-z ↗
9. A review of functionally graded thick cylindrical and conical shells
10. Two-dimensional thermo-elastic analysis of FG-CNTRC cylindrical pressure vessels
11. An approximate thermo-mechanical solution of a functionally graded cylinder using hybrid integral transform and finite element method
12. A mixed pseudo-spectral FFT-FE method for asymmetric nonlinear heat transfer of a functionally graded hollow cylinder
13. Thermoelastic analysis of rotating thick-walled cylindrical pressure vessels with linear variable thickness under bi-directional temperature
14. Thermoelastic analysis of pressurized rotating thick-walled cylindrical shells with variable thickness under Bi-directional temperature fields
15. Thermoelastic analysis of rotating FGM thick-walled cylindrical pressure vessels under bi-directional thermal loading using disk-form multilayer
16. Thermoelastic analysis of variable thickness truncated conical shell subjected to thermomechanical load with internal heat generation using perturbation technique
17. Bi-directional thermo-elastic analysis of pressurized thick cylindrical shell with nonlinear variable thickness
18. Prediction of the mean folding force during the axial compression in foam-filled grooved tubes by theoretical analysis10.1016/j.matdes.2011.12.032 ↗
19. Thermoelastoplastic analysis of FGM rotating thick cylindrical pressure vessels in linear elastic-fully plastic condition10.1016/j.compositesb.2018.09.022 ↗
20. Effect of exponentially-varying properties on displacements and stresses in pressurized functionally graded thick spherical shells with using iterative technique
21. Absorbed energy by foam-filled quadrangle tubes during the crushing process by considering the interaction effects10.1016/j.acme.2014.09.005 ↗
22. An exact solution for stresses and displacements of pressurized FGM thick-walled spherical shells with exponential-varying properties10.1007/s12206-012-0908-3 ↗
23. Thermo-electro-elastic analysis of functionally graded piezoelectric shells of revolution: governing equations and solutions for some simple cases10.1016/j.ijengsci.2016.04.007 ↗
24. Exact and numerical elastic analysis for the FGM thick-walled cylindrical pressure vessels with exponentially-varying properties10.1515/amm-2016-0267 ↗
25. A semi‐analytical solution for elastic analysis of rotating thick cylindrical shells with variable thickness using disk form multilayers
26. A semi-analytical solution of thick truncated cones using matched asymptotic method and disk form multilayers10.2478/meceng-2014-0029 ↗
27. Elastic analysis of pressurized thick hollow cylindrical shells with clamped-clamped ends
28. Miyamoto · 2013
29. Shen · 2016
30. A new higher order shear and normal deformation theory for FGM sandwich shells10.1016/j.compstruct.2021.114865 ↗
31. The buckling and vibration analysis of coating-FGM-substrate conical shells under hydrostatic pressure with mixed boundary conditions10.1016/j.compstruct.2018.10.104 ↗
32. The stability analysis of shear deformable FGM sandwich conical shells under the axial load10.1016/j.compstruct.2017.06.022 ↗
33. Exact thermoelastoplastic analysis of FGM rotating hollow disks in a linear elastic-fully plastic condition
34. Buckling analysis of arbitrary two-directional functionally graded Euler–Bernoulli nano-beams based on nonlocal elasticity theory10.1016/j.ijengsci.2016.03.001 ↗
35. Non-local analysis of free vibration of bi-directional functionally graded Euler–Bernoulli nano-beams10.1016/j.ijengsci.2016.04.011 ↗
36. Vibrations of three-dimensionally graded nanobeams10.1016/j.ijengsci.2018.03.004 ↗
37. Exact elasto-plastic analysis of rotating disks made of functionally graded materials10.1016/j.ijengsci.2014.07.009 ↗
38. Consistent couple-stress theory for free vibration analysis of Euler-Bernoulli nano-beams made of arbitrary bi-directional functionally graded materials
39. Buckling analysis of FGM Euler-Bernoulli nano-beams with 3D-varying properties based on consistent couple-stress theory
40. On vibration of bi-directional functionally graded nanobeams under magnetic field10.1080/15397734.2020.1719507 ↗
41. Theoretical and experimental study on empty and foam-filled columns with square and rectangular cross section under axial compression10.1016/j.ijmecsci.2012.09.011 ↗
42. Elastic analysis of exponential FGM disks subjected to internal and external pressure
43. Bending analysis of bi-directional functionally graded Euler-Bernoulli nano-beams using integral form of Eringen's non-local elasticity theory
44. Exact solutions for thermal stresses in a rotating thick-walled cylinder of functionally graded materials10.3923/jas.2008.3267.3272 ↗
45. Free vibrations analysis of arbitrary three-dimensionally FGM nanoplates
46. Elastic analysis of pressurized thick truncated conical shells made of functionally graded materials10.12989/sem.2012.43.1.105 ↗
47. Thermoelastic buckling of FGM conical shells under non-linear temperature rise in the framework of the shear deformation theory10.1016/j.compositesb.2016.09.102 ↗
48. Free vibration analysis of FGM cylindrical shell partially resting on Pasternak elastic foundation with an oblique edge10.1016/j.compositesb.2014.11.024 ↗
49. Thermal vibration of FGM beams with general boundary conditions using a higher-order shear deformation theory10.1016/j.compositesb.2018.08.111 ↗
50. Analytical solutions for yield onset achievement in FGM thick walled cylindrical tubes undergoing thermomechanical loads10.1016/j.compositesb.2017.02.023 ↗
51. Nonlinear bending and postbuckling of FGM cylindrical panels subjected to combined loadings and resting on elastic foundations in thermal environments10.1016/j.compositesb.2015.03.078 ↗
52. Buckling of elastoplastic functionally graded cylindrical shells under combined compression and pressure10.1016/j.compositesb.2014.09.024 ↗
53. Free vibration analysis of functionally graded rotating conical shells in thermal environment10.1016/j.compositesb.2019.01.007 ↗
54. Creep damage evaluation of thick-walled spheres using a long-term creep constitutive model10.1007/s12206-009-0631-x ↗
55. Creep modeling in functionally graded rotating disc of variable thickness10.1007/s12206-010-0817-2 ↗
56. Time-dependent thermoelastic creep analysis of rotating disk made of Al–SiC composite10.1007/s00419-011-0522-3 ↗
57. Effect of thermal stress on creep lifetime for a gas turbine combustion liner10.1016/j.engfailanal.2014.10.004 ↗
58. Modeling creep behavior of thermally graded rotating disc of functionally graded material
59. Creep damage and life assessment of thick-walled spherical reactor using Larson–Miller parameter10.1016/j.ijpvp.2017.02.003 ↗
60. Modeling creep analysis of thermally graded anisotropic rotating composite disc10.1142/S1758825118500631 ↗
61. Creep damage and remnant life prediction of rotating hollow shaft based on the design strain and theta projection concept10.1080/15376494.2018.1432785 ↗
62. Creep analysis of a cylinder subjected to 2D thermoelasticity loads and boundary conditions with inner heat generation source10.1016/j.finmec.2024.100271 ↗
63. Time-dependent thermo-creep analysis of rotating FGM thick-walled cylindrical pressure vessels under heat flux10.1016/j.ijengsci.2014.06.006 ↗
64. New exact solution for creep behavior of rotating thick-walled cylinders
65. Steady-state creep deformations and stresses in FGM rotating thick cylindrical pressure vessels10.1017/jmech.2014.70 ↗
66. Time-dependent thermo-electro-mechanical creep behavior of radially polarized FGPM rotating cylinder
67. Time-dependent behaviors of a FGPM hollow sphere under the coupling of multi-fields10.1016/j.solidstatesciences.2012.02.011 ↗
68. Thermoelastic creep analysis of a functionally graded various thickness rotating disk with temperature-dependent material properties10.1016/j.ijpvp.2013.05.001 ↗
69. Effect of heat flux on creep stresses of thick-walled cylindrical pressure vessels10.1016/S1665-6423(14)71637-2 ↗
70. Time-dependent thermo-elastic creep analysis of thick-walled spherical pressure vessels made of functionally graded materials10.15632/jtam-pl.53.4.1053 ↗
71. Time dependent creep analysis in thick FGM rotating disk with two-dimensional pattern of heterogeneity10.1016/j.ijmecsci.2018.03.010 ↗
72. Time-dependent stress analysis in functionally graded materials10.1016/S0020-7683(99)00310-8 ↗
73. Creep deformations and stresses in thick-walled cylindrical vessels of functionally graded materials subjected to internal pressure10.1016/j.compstruct.2005.10.002 ↗
74. Magnetothermoelastic creep analysis of functionally graded cylinders10.1016/j.ijpvp.2010.05.001 ↗
75. Steady-state creep analysis of a functionally graded thick cylinder subjected to internal pressure and thermal gradient10.3139/146.110738 ↗
76. The analysis of time-dependent creep in FGPM thick walled sphere under electro-magneto-thermo-mechanical loadings10.1007/s11043-012-9185-x ↗
77. Creep analysis of the FG cylinders: time-dependent non-axisymmetric behavior
78. Free vibration and stability of functionally graded circular cylindrical shells according to a 2D higher-order deformation theory10.1016/j.compstruct.2008.05.019 ↗
79. A review of theories for the modeling and analysis of functionally graded plates and shells10.1016/j.compstruct.2015.03.010 ↗
80. Elastic analysis of heterogeneous thick cylinders subjected to internal or external pressure using shear deformation theory10.12700/APH.9.6.2012.6.8 ↗
81. Determination of displacements and stresses in pressurized thick cylindrical shells with variable thickness using perturbation technique10.5755/j01.mech.18.1.1274 ↗
82. Elastic solution of pressurized clamped-clamped thick cylindrical shells made of functionally graded materials
83. Elastic analysis of pressurized thick cylindrical shells with variable thickness made of functionally graded materials10.1016/j.compositesb.2012.09.043 ↗
84. Elastic analysis of FGM rotating thick truncated conical shells with axially-varying properties under non-uniform pressure loading10.1016/j.compstruct.2014.12.028 ↗
85. Elastic analysis of carbon nanotube-reinforced composite plates with piezoelectric layers using shear deformation theory10.1142/S1758825117500119 ↗
86. Elastic analysis of axially functionally graded rotating thick cylinder with variable thickness under non-uniform arbitrarily pressure loading10.1016/j.ijengsci.2014.12.004 ↗
87. Deformations and stresses in rotating FGM pressurized thick hollow cylinder under thermal load
88. Elastic analysis of FGM rotating cylindrical pressure vessels10.1080/02533839.2010.9671640 ↗
89. Thermo-elastic analysis of clamped-clamped thick FGM cylinders by using third-order shear deformation theory10.1590/1679-78252254 ↗
90. Application of the FOSDT to the solution of buckling problem of FGM sandwich conical shells under hydrostatic pressure10.1016/j.compositesb.2018.01.025 ↗
91. Elastic solution of axisymmetric thick truncated conical shells based on first-order shear deformation theory
92. An elastic analysis for thick cylindrical pressure vessels with variable thickness10.5267/j.esm.2015.1.003 ↗
93. Thermo-elastic analysis of axially functionally graded rotating thick cylindrical pressure vessels with variable thickness under mechanical loading10.1016/j.ijengsci.2015.07.005 ↗
94. Elastic analysis of rotating thick cylindrical pressure vessels under non-uniform pressure: linear and non-linear thickness10.3311/PPme.7153 ↗
95. Thermo-elastic analysis of axially functionally graded rotating thick truncated conical shells with varying thickness10.1016/j.compositesb.2016.04.026 ↗
96. Application of the first order shear deformation theory to the solution of free vibration problem for laminated conical shells10.1016/j.compstruct.2018.01.016 ↗
97. Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory
98. Stress analysis of rotating thick truncated conical shells with variable thickness under mechanical and thermal loads
99. The stability of FGM truncated conical shells under combined axial and external mechanical loads in the framework of the shear deformation theory10.1016/j.compositesb.2016.02.027 ↗
100. The nonlinear vibration of orthotropic functionally graded cylindrical shells surrounded by an elastic foundation within first order shear deformation theory10.1016/j.compositesb.2017.02.006 ↗